To disassemble instructions for JIT-ed programs, bpftool has relied on
the libbfd library. This has been problematic in the past: libbfd's
interface is not meant to be stable and has changed several times. For
building bpftool, we have to detect how the libbfd version on the system
behaves, which is why we have to handle features disassembler-four-args
and disassembler-init-styled in the Makefile. When it comes to shipping
bpftool, this has also caused issues with several distribution
maintainers unwilling to support the feature (see for example Debian's
page for binutils-dev, which ships libbfd: "Note that building Debian
packages which depend on the shared libbfd is Not Allowed." [0]).
For these reasons, we add support for LLVM as an alternative to libbfd
for disassembling instructions of JIT-ed programs. Thanks to the
preparation work in the previous commits, it's easy to add the library
by passing the relevant compilation options in the Makefile, and by
adding the functions for setting up the LLVM disassembler in file
jit_disasm.c.
The LLVM disassembler requires the LLVM development package (usually
llvm-dev or llvm-devel).
The expectation is that the interface for this disassembler will be more
stable. There is a note in LLVM's Developer Policy [1] stating that the
stability for the C API is "best effort" and not guaranteed, but at
least there is some effort to keep compatibility when possible (which
hasn't really been the case for libbfd so far). Furthermore, the Debian
page for the related LLVM package does not caution against linking to
the lib, as binutils-dev page does.
Naturally, the display of disassembled instructions comes with a few
minor differences. Here is a sample output with libbfd (already
supported before this patch):
# bpftool prog dump jited id 56
bpf_prog_6deef7357e7b4530:
0: nopl 0x0(%rax,%rax,1)
5: xchg %ax,%ax
7: push %rbp
8: mov %rsp,%rbp
b: push %rbx
c: push %r13
e: push %r14
10: mov %rdi,%rbx
13: movzwq 0xb4(%rbx),%r13
1b: xor %r14d,%r14d
1e: or $0x2,%r14d
22: mov $0x1,%eax
27: cmp $0x2,%r14
2b: jne 0x000000000000002f
2d: xor %eax,%eax
2f: pop %r14
31: pop %r13
33: pop %rbx
34: leave
35: ret
LLVM supports several variants that we could set when initialising the
disassembler, for example with:
LLVMSetDisasmOptions(*ctx,
LLVMDisassembler_Option_AsmPrinterVariant);
but the default printer is used for now. Here is the output with LLVM:
# bpftool prog dump jited id 56
bpf_prog_6deef7357e7b4530:
0: nopl (%rax,%rax)
5: nop
7: pushq %rbp
8: movq %rsp, %rbp
b: pushq %rbx
c: pushq %r13
e: pushq %r14
10: movq %rdi, %rbx
13: movzwq 180(%rbx), %r13
1b: xorl %r14d, %r14d
1e: orl $2, %r14d
22: movl $1, %eax
27: cmpq $2, %r14
2b: jne 0x2f
2d: xorl %eax, %eax
2f: popq %r14
31: popq %r13
33: popq %rbx
34: leave
35: retq
The LLVM disassembler comes as the default choice, with libbfd as a
fall-back.
Of course, we could replace libbfd entirely and avoid supporting two
different libraries. One reason for keeping libbfd is that, right now,
it works well, we have all we need in terms of features detection in the
Makefile, so it provides a fallback for disassembling JIT-ed programs if
libbfd is installed but LLVM is not. The other motivation is that libbfd
supports nfp instruction for Netronome's SmartNICs and can be used to
disassemble offloaded programs, something that LLVM cannot do. If
libbfd's interface breaks again in the future, we might reconsider
keeping support for it.
[0] https://packages.debian.org/buster/binutils-dev
[1] https://llvm.org/docs/DeveloperPolicy.html#c-api-changes
Signed-off-by: Quentin Monnet <quentin@xxxxxxxxxxxxx>
Tested-by: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
Acked-by: Yonghong Song <yhs@xxxxxx>
---
tools/bpf/bpftool/Makefile | 46 +++++++++-----
tools/bpf/bpftool/jit_disasm.c | 112 ++++++++++++++++++++++++++++++++-
tools/bpf/bpftool/main.h | 4 +-
3 files changed, 140 insertions(+), 22 deletions(-)
diff --git a/tools/bpf/bpftool/Makefile b/tools/bpf/bpftool/Makefile
index 1c81f4d514bb..787b857d3fb5 100644
--- a/tools/bpf/bpftool/Makefile
+++ b/tools/bpf/bpftool/Makefile
@@ -95,6 +95,7 @@ RM ?= rm -f
FEATURE_USER = .bpftool
FEATURE_TESTS := clang-bpf-co-re
+FEATURE_TESTS += llvm
FEATURE_TESTS += libcap
FEATURE_TESTS += libbfd
FEATURE_TESTS += libbfd-liberty
@@ -103,6 +104,7 @@ FEATURE_TESTS += disassembler-four-args
FEATURE_TESTS += disassembler-init-styled
FEATURE_DISPLAY := clang-bpf-co-re
+FEATURE_DISPLAY += llvm
FEATURE_DISPLAY += libcap
FEATURE_DISPLAY += libbfd
FEATURE_DISPLAY += libbfd-liberty
@@ -137,27 +139,37 @@ all: $(OUTPUT)bpftool
SRCS := $(wildcard *.c)
-ifeq ($(feature-libbfd),1)
- LIBS += -lbfd -ldl -lopcodes
-else ifeq ($(feature-libbfd-liberty),1)
- LIBS += -lbfd -ldl -lopcodes -liberty
-else ifeq ($(feature-libbfd-liberty-z),1)
- LIBS += -lbfd -ldl -lopcodes -liberty -lz
-endif
+ifeq ($(feature-llvm),1)
+ # If LLVM is available, use it for JIT disassembly
+ CFLAGS += -DHAVE_LLVM_SUPPORT
+ LLVM_CONFIG_LIB_COMPONENTS := mcdisassembler all-targets
+ CFLAGS += $(shell $(LLVM_CONFIG) --cflags --libs $(LLVM_CONFIG_LIB_COMPONENTS))
+ LIBS += $(shell $(LLVM_CONFIG) --libs $(LLVM_CONFIG_LIB_COMPONENTS))
+ LDFLAGS += $(shell $(LLVM_CONFIG) --ldflags)
+else
+ # Fall back on libbfd
+ ifeq ($(feature-libbfd),1)
+ LIBS += -lbfd -ldl -lopcodes
+ else ifeq ($(feature-libbfd-liberty),1)
+ LIBS += -lbfd -ldl -lopcodes -liberty
+ else ifeq ($(feature-libbfd-liberty-z),1)
+ LIBS += -lbfd -ldl -lopcodes -liberty -lz
+ endif
-# If one of the above feature combinations is set, we support libbfd
-ifneq ($(filter -lbfd,$(LIBS)),)
- CFLAGS += -DHAVE_LIBBFD_SUPPORT
+ # If one of the above feature combinations is set, we support libbfd
+ ifneq ($(filter -lbfd,$(LIBS)),)
+ CFLAGS += -DHAVE_LIBBFD_SUPPORT
- # Libbfd interface changed over time, figure out what we need
- ifeq ($(feature-disassembler-four-args), 1)
- CFLAGS += -DDISASM_FOUR_ARGS_SIGNATURE
- endif
- ifeq ($(feature-disassembler-init-styled), 1)
- CFLAGS += -DDISASM_INIT_STYLED
+ # Libbfd interface changed over time, figure out what we need
+ ifeq ($(feature-disassembler-four-args), 1)
+ CFLAGS += -DDISASM_FOUR_ARGS_SIGNATURE
+ endif
+ ifeq ($(feature-disassembler-init-styled), 1)
+ CFLAGS += -DDISASM_INIT_STYLED
+ endif
endif
endif
-ifeq ($(filter -DHAVE_LIBBFD_SUPPORT,$(CFLAGS)),)
+ifeq ($(filter -DHAVE_LLVM_SUPPORT -DHAVE_LIBBFD_SUPPORT,$(CFLAGS)),)
# No support for JIT disassembly
SRCS := $(filter-out jit_disasm.c,$(SRCS))
endif
diff --git a/tools/bpf/bpftool/jit_disasm.c b/tools/bpf/bpftool/jit_disasm.c
index e31ad3950fd6..c28b21f90cb9 100644
--- a/tools/bpf/bpftool/jit_disasm.c
+++ b/tools/bpf/bpftool/jit_disasm.c
@@ -20,18 +20,123 @@
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
-#include <bfd.h>
-#include <dis-asm.h>
#include <sys/stat.h>
#include <limits.h>
#include <bpf/libbpf.h>
+
+#ifdef HAVE_LLVM_SUPPORT
+#include <llvm-c/Core.h>
+#include <llvm-c/Disassembler.h>
+#include <llvm-c/Target.h>
+#include <llvm-c/TargetMachine.h>
+#endif
+
+#ifdef HAVE_LIBBFD_SUPPORT
+#include <bfd.h>
+#include <dis-asm.h>
#include <tools/dis-asm-compat.h>
+#endif
#include "json_writer.h"
#include "main.h"
static int oper_count;
+#ifdef HAVE_LLVM_SUPPORT
+#define DISASM_SPACER
+
+typedef LLVMDisasmContextRef disasm_ctx_t;
+
+static int printf_json(char *s)
+{
+ s = strtok(s, " \t");
+ jsonw_string_field(json_wtr, "operation", s);
+
+ jsonw_name(json_wtr, "operands");
+ jsonw_start_array(json_wtr);
+ oper_count = 1;
+
+ while ((s = strtok(NULL, " \t,()")) != 0) {
+ jsonw_string(json_wtr, s);
+ oper_count++;
+ }
+ return 0;
+}
+
+/* This callback to set the ref_type is necessary to have the LLVM disassembler
+ * print PC-relative addresses instead of byte offsets for branch instruction
+ * targets.
+ */
+static const char *
+symbol_lookup_callback(__maybe_unused void *disasm_info,
+ __maybe_unused uint64_t ref_value,
+ uint64_t *ref_type, __maybe_unused uint64_t ref_PC,
+ __maybe_unused const char **ref_name)
+{
+ *ref_type = LLVMDisassembler_ReferenceType_InOut_None;
+ return NULL;
+}
+
+static int
+init_context(disasm_ctx_t *ctx, const char *arch,
+ __maybe_unused const char *disassembler_options,
+ __maybe_unused unsigned char *image, __maybe_unused ssize_t len)
+{
+ char *triple;
+
+ if (arch) {
+ p_err("Architecture %s not supported", arch);
+ return -1;
+ }
+
+ triple = LLVMGetDefaultTargetTriple();
+ if (!triple) {
+ p_err("Failed to retrieve triple");
+ return -1;
+ }
+ *ctx = LLVMCreateDisasm(triple, NULL, 0, NULL, symbol_lookup_callback);
+ LLVMDisposeMessage(triple);
+
+ if (!*ctx) {
+ p_err("Failed to create disassembler");
+ return -1;
+ }
+
+ return 0;
+}
+
+static void destroy_context(disasm_ctx_t *ctx)
+{
+ LLVMDisposeMessage(*ctx);
+}
+
+static int
+disassemble_insn(disasm_ctx_t *ctx, unsigned char *image, ssize_t len, int pc)
+{
+ char buf[256];
+ int count;
+
+ count = LLVMDisasmInstruction(*ctx, image + pc, len - pc, pc,
+ buf, sizeof(buf));
+ if (json_output)
+ printf_json(buf);
+ else
+ printf("%s", buf);
+
+ return count;
+}
+
+int disasm_init(void)
+{
+ LLVMInitializeNativeTarget();
+ LLVMInitializeNativeDisassembler();
+ return 0;
+}
+#endif /* HAVE_LLVM_SUPPORT */
+
+#ifdef HAVE_LIBBFD_SUPPORT
+#define DISASM_SPACER "\t"
+
typedef struct {
struct disassemble_info *info;
disassembler_ftype disassemble;
@@ -210,6 +315,7 @@ int disasm_init(void)
bfd_init();
return 0;
}
+#endif /* HAVE_LIBBPFD_SUPPORT */
int disasm_print_insn(unsigned char *image, ssize_t len, int opcodes,
const char *arch, const char *disassembler_options,
@@ -252,7 +358,7 @@ int disasm_print_insn(unsigned char *image, ssize_t len, int opcodes,
if (linfo)
btf_dump_linfo_plain(btf, linfo, "; ",
linum);
- printf("%4x:\t", pc);
+ printf("%4x:" DISASM_SPACER, pc);
}
count = disassemble_insn(&ctx, image, len, pc);
diff --git a/tools/bpf/bpftool/main.h b/tools/bpf/bpftool/main.h
index c9e171082cf6..9a149c67aa5d 100644
--- a/tools/bpf/bpftool/main.h
+++ b/tools/bpf/bpftool/main.h
@@ -172,7 +172,7 @@ int map_parse_fds(int *argc, char ***argv, int **fds);
int map_parse_fd_and_info(int *argc, char ***argv, void *info, __u32 *info_len);
struct bpf_prog_linfo;
-#ifdef HAVE_LIBBFD_SUPPORT
+#if defined(HAVE_LLVM_SUPPORT) || defined(HAVE_LIBBFD_SUPPORT)
int disasm_print_insn(unsigned char *image, ssize_t len, int opcodes,
const char *arch, const char *disassembler_options,
const struct btf *btf,
@@ -193,7 +193,7 @@ int disasm_print_insn(unsigned char *image, ssize_t len, int opcodes,
}
static inline int disasm_init(void)
{
- p_err("No libbfd support");
+ p_err("No JIT disassembly support");
return -1;
}
#endif
--
2.34.1
