Re: [PATCH bpf-next 4/5] bpf: Stop bpf_setsockopt(TCP_CONGESTION) in init ops to recur itself

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 22, 2022 at 3:56 PM Martin KaFai Lau <kafai@xxxxxx> wrote:
>
> From: Martin KaFai Lau <martin.lau@xxxxxxxxxx>
>
> When a bad bpf prog '.init' calls
> bpf_setsockopt(TCP_CONGESTION, "itself"), it will trigger this loop:
>
> .init => bpf_setsockopt(tcp_cc) => .init => bpf_setsockopt(tcp_cc) ...
> ... => .init => bpf_setsockopt(tcp_cc).
>
> It was prevented by the prog->active counter before but the prog->active
> detection cannot be used in struct_ops as explained in the earlier
> patch of the set.
>
> In this patch, the second bpf_setsockopt(tcp_cc) is not allowed
> in order to break the loop.  This is done by checking the
> previous bpf_run_ctx has saved the same sk pointer in the
> bpf_cookie.
>
> Note that this essentially limits only the first '.init' can
> call bpf_setsockopt(TCP_CONGESTION) to pick a fallback cc (eg. peer
> does not support ECN) and the second '.init' cannot fallback to
> another cc.  This applies even the second
> bpf_setsockopt(TCP_CONGESTION) will not cause a loop.
>
> Signed-off-by: Martin KaFai Lau <martin.lau@xxxxxxxxxx>
> ---
>  include/linux/filter.h |  3 +++
>  net/core/filter.c      |  4 ++--
>  net/ipv4/bpf_tcp_ca.c  | 54 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 59 insertions(+), 2 deletions(-)
>
> diff --git a/include/linux/filter.h b/include/linux/filter.h
> index 98e28126c24b..9942ecc68a45 100644
> --- a/include/linux/filter.h
> +++ b/include/linux/filter.h
> @@ -911,6 +911,9 @@ int sk_get_filter(struct sock *sk, sockptr_t optval, unsigned int len);
>  bool sk_filter_charge(struct sock *sk, struct sk_filter *fp);
>  void sk_filter_uncharge(struct sock *sk, struct sk_filter *fp);
>
> +int _bpf_setsockopt(struct sock *sk, int level, int optname,
> +                   char *optval, int optlen);
> +
>  u64 __bpf_call_base(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5);
>  #define __bpf_call_base_args \
>         ((u64 (*)(u64, u64, u64, u64, u64, const struct bpf_insn *)) \
> diff --git a/net/core/filter.c b/net/core/filter.c
> index f4cea3ff994a..e56a1ebcf1bc 100644
> --- a/net/core/filter.c
> +++ b/net/core/filter.c
> @@ -5244,8 +5244,8 @@ static int __bpf_setsockopt(struct sock *sk, int level, int optname,
>         return -EINVAL;
>  }
>
> -static int _bpf_setsockopt(struct sock *sk, int level, int optname,
> -                          char *optval, int optlen)
> +int _bpf_setsockopt(struct sock *sk, int level, int optname,
> +                   char *optval, int optlen)
>  {
>         if (sk_fullsock(sk))
>                 sock_owned_by_me(sk);
> diff --git a/net/ipv4/bpf_tcp_ca.c b/net/ipv4/bpf_tcp_ca.c
> index 6da16ae6a962..a9f2cab5ffbc 100644
> --- a/net/ipv4/bpf_tcp_ca.c
> +++ b/net/ipv4/bpf_tcp_ca.c
> @@ -144,6 +144,57 @@ static const struct bpf_func_proto bpf_tcp_send_ack_proto = {
>         .arg2_type      = ARG_ANYTHING,
>  };
>
> +BPF_CALL_5(bpf_init_ops_setsockopt, struct sock *, sk, int, level,
> +          int, optname, char *, optval, int, optlen)
> +{
> +       struct bpf_tramp_run_ctx *run_ctx, *saved_run_ctx;
> +       int ret;
> +
> +       if (optname != TCP_CONGESTION)
> +               return _bpf_setsockopt(sk, level, optname, optval, optlen);
> +
> +       run_ctx = (struct bpf_tramp_run_ctx *)current->bpf_ctx;
> +       if (unlikely(run_ctx->saved_run_ctx &&
> +                    run_ctx->saved_run_ctx->type == BPF_RUN_CTX_TYPE_STRUCT_OPS)) {
> +               saved_run_ctx = (struct bpf_tramp_run_ctx *)run_ctx->saved_run_ctx;
> +               /* It stops this looping
> +                *
> +                * .init => bpf_setsockopt(tcp_cc) => .init =>
> +                * bpf_setsockopt(tcp_cc)" => .init => ....
> +                *
> +                * The second bpf_setsockopt(tcp_cc) is not allowed
> +                * in order to break the loop when both .init
> +                * are the same bpf prog.
> +                *
> +                * This applies even the second bpf_setsockopt(tcp_cc)
> +                * does not cause a loop.  This limits only the first
> +                * '.init' can call bpf_setsockopt(TCP_CONGESTION) to
> +                * pick a fallback cc (eg. peer does not support ECN)
> +                * and the second '.init' cannot fallback to
> +                * another cc.
> +                */
> +               if (saved_run_ctx->bpf_cookie == (uintptr_t)sk)
> +                       return -EBUSY;
> +       }
> +
> +       run_ctx->bpf_cookie = (uintptr_t)sk;
> +       ret = _bpf_setsockopt(sk, level, optname, optval, optlen);
> +       run_ctx->bpf_cookie = 0;

Instead of adding 4 bytes for enum in patch 3
(which will be 8 bytes due to alignment)
and abusing bpf_cookie here
(which struct_ops bpf prog might eventually read and be surprised
to find sk pointer in there)
how about adding 'struct task_struct *saved_current' as another arg
to bpf_tramp_run_ctx ?
Always store the current task in there in prog_entry_struct_ops
and then compare it here in this specialized bpf_init_ops_setsockopt?

Or maybe always check in enter_prog_struct_ops:
if (container_of(current->bpf_ctx, struct bpf_tramp_run_ctx,
run_ctx)->saved_current == current) // goto out since recursion?
it will prevent issues in case we don't know about and will
address the good recursion case as explained in patch 1?
I'm assuming 2nd ssthresh runs in a different task..
Or is it actually the same task?



[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux