On Tue, 2022-08-23 at 13:24 +0200, Maciej Fijalkowski wrote: > On Tue, Aug 23, 2022 at 09:49:43AM +0000, Maxim Mikityanskiy wrote: > > Anyone from Intel? Maciej, Björn, Magnus? > > Hey Maxim, > > how about keeping it simple and going with option 1? This behavior was > even proposed in the v1 submission of the patch set we're talking about. Yeah, I know it was the behavior in v1. It was me who suggested not dropping that packet, and I didn't realize back then that it had this undesired side effect - sorry for that! Option 1 sounds good to me as the first remedy, we can start with that. However, it's not perfect: when NAPI and the application are pinned to the same core, if the fill ring is bigger than the RX ring (which makes sense in case of multiple sockets on the same UMEM), the driver will constantly get into this condition, drop one packet, yield to userspace, the application will of course clean up the RX ring, but then the process will repeat. That means, we'll always have a small percentage of packets dropped, which may trigger the congestion control algorithms on the other side, slowing down the TX to unacceptable speeds (because packet drops won't disappear after slowing down just a little). Given the above, we may need a more complex solution for the long term. What do you think? Also, if the application uses poll(), this whole logic (either v1 or v2) seems not needed, because poll() returns to the application when something becomes available in the RX ring, but I guess the reason for adding it was that fantastic 78% performance improvement mentioned in the cover letter? > > > > > Does anyone else have anything to say? IMO, calling XDP for the same > > packet multiple times is a bug, we should agree on some sane solution. > > > > On Thu, 2022-08-18 at 14:26 +0300, Maxim Mikityanskiy wrote: > > > Hi Maciej, > > > > > > On Wed, 2022-04-13 at 17:30 +0200, Maciej Fijalkowski wrote: > > > > v2: > > > > - add likely for internal redirect return codes in ice and ixgbe > > > > (Jesper) > > > > - do not drop the buffer that head pointed to at full XSK RQ > > > > (Maxim) > > > > > > I found an issue with this approach. If you don't drop that packet, > > > you'll need to run the XDP program for the same packet again. If the > > > XDP program is anything more complex than "redirect-everything-to- > > > XSK", > > > it will get confused, for example, if it tracks any state or counts > > > anything. > > > > > > We can't check whether there is enough space in the XSK RX ring > > > before > > > running the XDP program, as we don't know in advance which XSK socket > > > will be selected. > > > > > > We can't store bpf_redirect_info across NAPI calls to avoid running > > > the > > > XDP program second time, as bpf_redirect_info is protected by RCU and > > > the assumption that the whole XDP_REDIRECT operation happens within > > > one > > > NAPI cycle. > > > > > > I see the following options: > > > > > > 1. Drop the packet when an overflow happens. The problem is that it > > > will happen systematically, but it's still better than the old > > > behavior > > > (drop mulitple packets when an overflow happens and hog the CPU). > > > > > > 2. Make this feature opt-in. If the application opts in, it > > > guarantees > > > to take measures to handle duplicate packets in XDP properly. > > > > > > 3. Require the XDP program to indicate it supports being called > > > multiple times for the same packet and pass a flag to it if it's a > > > repeated run. Drop the packet in the driver if the XDP program > > > doesn't > > > indicate this support. The indication can be done similar to how it's > > > implemented for XDP multi buffer. > > > > > > Thoughts? Other options? > > > > > > Thanks, > > > Max > > > > > > > - terminate Rx loop only when need_wakeup feature is enabled > > > > (Maxim) > > > > - reword from 'stop softirq processing' to 'stop NAPI Rx > > > > processing' > > > > - s/ENXIO/EINVAL in mlx5 and stmmac's ndo_xsk_wakeup to keep it > > > > consitent with Intel's drivers (Maxim) > > > > - include Jesper's Acks > > > > > > > > Hi! > > > > > > > > This is a revival of Bjorn's idea [0] to break NAPI loop when XSK > > > > Rx > > > > queue gets full which in turn makes it impossible to keep on > > > > successfully producing descriptors to XSK Rx ring. By breaking out > > > > of > > > > the driver side immediately we will give the user space opportunity > > > > for > > > > consuming descriptors from XSK Rx ring and therefore provide room > > > > in the > > > > ring so that HW Rx -> XSK Rx redirection can be done. > > > > > > > > Maxim asked and Jesper agreed on simplifying Bjorn's original API > > > > used > > > > for detecting the event of interest, so let's just simply check for > > > > -ENOBUFS within Intel's ZC drivers after an attempt to redirect a > > > > buffer > > > > to XSK Rx. No real need for redirect API extension. > > > > > > > > One might ask why it is still relevant even after having proper > > > > busy > > > > poll support in place - here is the justification. > > > > > > > > For xdpsock that was: > > > > - run for l2fwd scenario, > > > > - app/driver processing took place on the same core in busy poll > > > > with 2048 budget, > > > > - HW ring sizes Tx 256, Rx 2048, > > > > > > > > this work improved throughput by 78% and reduced Rx queue full > > > > statistic > > > > bump by 99%. > > > > > > > > For testing ice, make sure that you have [1] present on your side. > > > > > > > > This set, besides the work described above, carries also > > > > improvements > > > > around return codes in various XSK paths and lastly a minor > > > > optimization > > > > for xskq_cons_has_entries(), a helper that might be used when XSK > > > > Rx > > > > batching would make it to the kernel. > > > > > > > > Link to v1 and discussion around it is at [2]. > > > > > > > > Thanks! > > > > MF > > > > > > > > [0]: > > > > https://lore.kernel.org/bpf/20200904135332.60259-1-bjorn.topel@xxxxxxxxx/ > > > > [1]: > > > > https://lore.kernel.org/netdev/20220317175727.340251-1-maciej.fijalkowski@xxxxxxxxx/ > > > > [2]: > > > > https://lore.kernel.org/bpf/5864171b-1e08-1b51-026e-5f09b8945076@xxxxxxxxxx/T/ > > > > > > > > Björn Töpel (1): > > > > xsk: improve xdp_do_redirect() error codes > > > > > > > > Maciej Fijalkowski (13): > > > > xsk: diversify return codes in xsk_rcv_check() > > > > ice: xsk: decorate ICE_XDP_REDIR with likely() > > > > ixgbe: xsk: decorate IXGBE_XDP_REDIR with likely() > > > > ice: xsk: terminate Rx side of NAPI when XSK Rx queue gets full > > > > i40e: xsk: terminate Rx side of NAPI when XSK Rx queue gets full > > > > ixgbe: xsk: terminate Rx side of NAPI when XSK Rx queue gets full > > > > ice: xsk: diversify return values from xsk_wakeup call paths > > > > i40e: xsk: diversify return values from xsk_wakeup call paths > > > > ixgbe: xsk: diversify return values from xsk_wakeup call paths > > > > mlx5: xsk: diversify return values from xsk_wakeup call paths > > > > stmmac: xsk: diversify return values from xsk_wakeup call paths > > > > ice: xsk: avoid refilling single Rx descriptors > > > > xsk: drop ternary operator from xskq_cons_has_entries > > > > > > > > .../ethernet/intel/i40e/i40e_txrx_common.h | 1 + > > > > drivers/net/ethernet/intel/i40e/i40e_xsk.c | 38 ++++++++----- > > > > drivers/net/ethernet/intel/ice/ice_txrx.h | 1 + > > > > drivers/net/ethernet/intel/ice/ice_xsk.c | 53 ++++++++++++--- > > > > ---- > > > > .../ethernet/intel/ixgbe/ixgbe_txrx_common.h | 1 + > > > > drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c | 52 ++++++++++----- > > > > --- > > > > .../ethernet/mellanox/mlx5/core/en/xsk/tx.c | 2 +- > > > > .../net/ethernet/stmicro/stmmac/stmmac_main.c | 4 +- > > > > net/xdp/xsk.c | 4 +- > > > > net/xdp/xsk_queue.h | 4 +- > > > > 10 files changed, 99 insertions(+), 61 deletions(-) > > > > > > > > >
