LAN937x is a Multi-Port 100BASE-T1 Ethernet Physical Layer switch compliant with the IEEE 802.3bw-2015 specification. The device provides 100 Mbit/s transmit and receive capability over a single Unshielded Twisted Pair (UTP) cable. LAN937x is successive revision of KSZ series switch. This series of patches provide the DSA driver support for Microchip LAN937X switch through MII/RMII interface. The RGMII interface support will be added in the follow up series. LAN937x uses the most of functionality of KSZ9477. The LAN937x switch series family consists of following SKUs: LAN9370: - 4 T1 Phys - 1 RGMII port LAN9371: - 3 T1 Phys & 1 TX Phy - 2 RGMII ports LAN9372: - 5 T1 Phys & 1 TX Phy - 2 RGMII ports LAN9373: - 5 T1 Phys - 2 RGMII & 1 SGMII port LAN9374: - 6 T1 Phys - 2 RGMII ports Changes in v14: - Updated the patch series to latest ksz code refactoring. - RGMII register configuration is removed from the series. It will be added in the follow up patch series. Changes in v13: - Fixed the compilation issue in patch 5 and 6 Changes in v12: - Removed the reduntant spi indirect enable in lan937x_init - Used the ksz_port_stp_state_set function - Apply rgmii internal delay only if it is rgmii port - Set the bit for 100baseTx in phylink_get_caps - Moved the ethtool related API from patch 5 to 7 - Moved lan_alu_entry struct in lan937x_dev.h from patch 5 to 9 - Moved lan_vlan_entry in lan937x_dev.h from patch 5 to 10 - Used the ksz_get_stats64 function for get_stats64 hook - Splitted the patch 5. one for port configuration, spi driver, phy read & write and mtu configuration. - Updated the indentation in ethernet-controller.yaml - lan937x.yaml: Removed the blank lines, updated the ethernet handle to macb0. Added the rgmii internal delay only for the ports. Changes in v11: - Tagged as RFC to get the feedback for the subpatches 1/10, 5/10 and 6/10 Changes in v10: - dsa.yaml: dropped moving mdio properties to dsa.yaml as per the feedback https://patchwork.kernel.org/project/netdevbpf/patch/20220318085540.281721-3-prasanna.vengateshan@xxxxxxxxxxxxx/#24787466 - microchip,lan937x.yaml: Naming convention changes in the example - lan937x_main.c: Moving configurations from lan937x_reset_switch() to setup() - lan937x_main.c: helper function has been introduced for lan937x_internal_phy_read & write - lan937x_dev.h: lan_alu_struct struct data type changes - lan937x_main.c: lan937x_get_stats64 make non blocking - lan937x_main.c: modified lan937x_port_mirror_add to include extack Changes in v9: - lan937x_main.c: of_node_put() correction in lan937x_parse_dt_rgmii_delay - lan937x_dev.c: removed the interface checks from lan937x_apply_rgmii_delay. - changes in ethernet-controller.yaml and dsa.yaml Changes in v8: - lan937x_dev.c: fixed lan937x_r_mib_pkt warning in the sub patches - lan937x_main.c: phylink_autoneg_inband() check removed in lan937x_phylink_mac_link_up() - lan937x_main.c: made legacy_pre_march2020 = false as this is non-legacy driver and indentation correction in lan937x_phylink_mac_link_up() - removed unnecessary parenthesis in lan937x_get_strings() Changes in v7: - microchip,lan937x.yaml: *-internal-delay-ps enum values & commit messages corrections - lan937x_main.c: removed phylink_validate() and added phylink_get_caps() - lan937x_main.c: added support for ethtool standard stats (get_eth_*_stats and get_stats64) - lan937x_main.c: removed unnecessary PVID read from lan937x_port_vlan_del() - integrated the changes of ksz9477 multi bridging support to lan937x dev and tested both multi bridging and STP - lan937x_port_vlan_del - dummy pvid read removed Changes in v6: - microchip_t1.c: There was new merge done in the net-next tree for microchip_1.c after the v5 submission. Hence rebased it for v6. Changes in v5: - microchip,lan937x.yaml: Added mdio properties detail - microchip,lan937x.yaml: *-internal-delay-ps added under port node - lan937x_dev.c: changed devm_mdiobus_alloc from of_mdiobus_register as suggested by Vladimir - lan937x_dev.c: added dev_info for rgmii internal delay & error message to user in case of out of range values - lan937x_dev.c: return -EOPNOTSUPP for C45 regnum values for lan937x_sw_mdio_read & write operations - return from function with out storing in a variable - lan937x_main.c: Added vlan_enable info in vlan_filtering API - lan937x_main.c: lan937x_port_vlan_del: removed unintended PVID write Changes in v4: - tag_ksz.c: cpu_to_be16 to put_unaligned_be16 - correct spacing in comments - tag_ksz.c: NETIF_F_HW_CSUM fix is integrated - lan937x_dev.c: mdio_np is removed from global and handled locally - lan937x_dev.c: unused functions removed lan937x_cfg32 & lan937x_port_cfg32 - lan937x_dev.c: lan937x_is_internal_100BTX_phy_port function name changes - lan937x_dev.c: RGMII internal delay handling for MAC. Delay values are retrieved from DTS and updated - lan937x_dev.c: corrected mutex operations for few dev variables - microchip,lan937x.yaml: introduced rx-internal-delay-ps & tx-internal-delay-ps for RGMII internal delay - lan937x_dev.c: Unnecessary mutex_lock has been removed - lan937x_main.c: PHY_INTERFACE_MODE_NA handling for lan937x_phylink_validate - lan937x_main.c: PORT_MIRROR_SNIFFER check in right place - lan937x_main.c: memset is used instead of writing 0's individually in lan937x_port_fdb_add function - lan937x_main.c: Removed \n from NL_SET_ERR_MSG_MOD calls Changes in v3: - Removed settings of cnt_ptr to zero and the memset() added a cleanup patch which moves this into ksz_init_mib_timer(). - Used ret everywhere instead of rc - microchip,lan937x.yaml: Remove mdio compatible - microchip_t1.c: Renaming standard phy registers - tag_ksz.c: LAN937X_TAIL_TAG_OVERRIDE renaming LAN937X_TAIL_TAG_BLOCKING_OVERRIDE - tag_ksz.c: Changed Ingress and Egress naming convention based on Host - tag_ksz.c: converted to skb_mac_header(skb) from (is_link_local_ether_addr(hdr->h_dest)) - lan937x_dev.c: Removed BCAST Storm protection settings since we have Tc commands for them - lan937x_dev.c: Flow control setting in lan937x_port_setup function - lan937x_dev.c: RGMII internal delay added only for cpu port, - lan937x_dev.c: of_get_compatible_child(node, "microchip,lan937x-mdio") to of_get_child_by_name(node, "mdio"); - lan937x_dev.c:lan937x_get_interface API: returned PHY_INTERFACE_MODE_INTERNAL instead of PHY_INTERFACE_MODE_NA - lan937x_main.c: Removed compat interface implementation in lan937x_config_cpu_port() API & dev_info corrected as well - lan937x_main.c: deleted ds->configure_vlan_while_not_filtering = true - lan937x_main.c: Added explanation for lan937x_setup lines - lan937x_main.c: FR_MAX_SIZE correction in lan937x_get_max_mtu API - lan937x_main.c: removed lan937x_port_bridge_flags dummy functions - lan937x_spi.c - mdiobus_unregister to be added to spi_remove function - lan937x_main.c: phy link layer changes - lan937x_main.c: port mirroring: sniff port selection limiting to one port - lan937x_main.c: Changed to global vlan filtering - lan937x_main.c: vlan_table array to structure - lan937x_main.c -Use extack instead of reporting errors to Console - lan937x_main.c - Remove cpu_port addition in vlan_add api - lan937x_main.c - removed pvid resetting Changes in v2: - return check for register read/writes - dt compatible compatible check is added against chip id value - lan937x_internal_t1_tx_phy_write() is renamed to lan937x_internal_phy_write() - lan937x_is_internal_tx_phy_port is renamed to lan937x_is_internal_100BTX_phy_port as it is 100Base-Tx phy - Return value for lan937x_internal_phy_write() is -EOPNOTSUPP in case of failures - Return value for lan937x_internal_phy_read() is 0xffff for non existent phy - cpu_port checking is removed from lan937x_port_stp_state_set() - lan937x_phy_link_validate: 100baseT_Full to 100baseT1_Full - T1 Phy driver is moved to drivers/net/phy/microchip_t1.c - Tx phy driver support will be added later - Legacy switch checkings in dts file are removed. - tag_ksz.c: Re-used ksz9477_rcv for lan937x_rcv - tag_ksz.c: Xmit() & rcv() Comments are corrected w.r.to host - net/dsa/Kconfig: Family skew numbers altered in ascending order - microchip,lan937x.yaml: eth is replaced with ethernet - microchip,lan937x.yaml: spi1 is replaced with spi - microchip,lan937x.yaml: cpu labelling is removed - microchip,lan937x.yaml: port@x value will match the reg value now Arun Ramadoss (10): net: dsa: microchip: generic access to ksz9477 static and reserved table net: dsa: microchip: add DSA support for microchip LAN937x net: dsa: microchip: lan937x: add dsa_tag_protocol net: dsa: microchip: lan937x: add phy read and write support net: dsa: microchip: lan937x: register mdio-bus net: dsa: microchip: lan937x: add MTU and fast_age support net: dsa: microchip: lan937x: add phylink_get_caps support net: dsa: microchip: lan937x: add phylink_mac_link_up support net: dsa: microchip: lan937x: add phylink_mac_config support net: dsa: microchip: add LAN937x in the ksz spi probe Prasanna Vengateshan (3): dt-bindings: net: make internal-delay-ps based on phy-mode dt-bindings: net: dsa: dt bindings for microchip lan937x net: dsa: tag_ksz: add tag handling for Microchip LAN937x .../bindings/net/dsa/microchip,lan937x.yaml | 192 +++++++ .../bindings/net/ethernet-controller.yaml | 35 +- MAINTAINERS | 1 + drivers/net/dsa/microchip/Kconfig | 2 +- drivers/net/dsa/microchip/Makefile | 1 + drivers/net/dsa/microchip/ksz9477.c | 27 +- drivers/net/dsa/microchip/ksz9477_reg.h | 3 - drivers/net/dsa/microchip/ksz_common.c | 105 ++++ drivers/net/dsa/microchip/ksz_common.h | 20 + drivers/net/dsa/microchip/ksz_spi.c | 26 + drivers/net/dsa/microchip/lan937x.h | 27 + drivers/net/dsa/microchip/lan937x_main.c | 497 ++++++++++++++++++ drivers/net/dsa/microchip/lan937x_reg.h | 180 +++++++ include/net/dsa.h | 2 + net/dsa/Kconfig | 4 +- net/dsa/tag_ksz.c | 59 +++ 16 files changed, 1156 insertions(+), 25 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml create mode 100644 drivers/net/dsa/microchip/lan937x.h create mode 100644 drivers/net/dsa/microchip/lan937x_main.c create mode 100644 drivers/net/dsa/microchip/lan937x_reg.h base-commit: dbc6fc7e3f76ac8a584cd39f9978d6b41a96e75a -- 2.36.1
