This patchset is to make atlantic to support multi-buffer XDP.
The first patch implement control plane of xdp.
The aq_xdp(), callback of .xdp_bpf is added.
The second patch implements data plane of xdp.
XDP_TX, XDP_DROP, and XDP_PASS is supported.
__aq_ring_xdp_clean() is added to receive and execute xdp program.
aq_nic_xmit_xdpf() is added to send packet by XDP.
The third patch implements callback of .ndo_xdp_xmit.
aq_xdp_xmit() is added to send redirected packets and it internally
calls aq_nic_xmit_xdpf().
Memory model is MEM_TYPE_PAGE_ORDER0 so it doesn't reuse rx page when
XDP_TX, XDP_PASS, XDP_REDIRECT.
Default the maximum rx frame size is 2K.
If xdp is attached, size is changed to about 3K.
It can be reused when XDP_DROP, and XDP_ABORTED.
Atlantic driver has AQ_CFG_RX_PAGEORDER option and it will be always 0
if xdp is attached.
LRO will be disabled if XDP program supports only single buffer.
AQC chip supports 32 multi-queues and 8 vectors(irq).
There are two options.
1. under 8 cores and maximum 4 tx queues per core.
2. under 4 cores and maximum 8 tx queues per core.
Like other drivers, these tx queues can be used only for XDP_TX,
XDP_REDIRECT queue. If so, no tx_lock is needed.
But this patchset doesn't use this strategy because getting hardware tx
queue index cost is too high.
So, tx_lock is used in the aq_nic_xmit_xdpf().
single-core, single queue, 80% cpu utilization.
30.75% bpf_prog_xxx_xdp_prog_tx [k] bpf_prog_xxx_xdp_prog_tx
10.35% [kernel] [k] aq_hw_read_reg <---------- here
4.38% [kernel] [k] get_page_from_freelist
single-core, 8 queues, 100% cpu utilization, half PPS.
45.56% [kernel] [k] aq_hw_read_reg <---------- here
17.58% bpf_prog_xxx_xdp_prog_tx [k] bpf_prog_xxx_xdp_prog_tx
4.72% [kernel] [k] hw_atl_b0_hw_ring_rx_receive
Performance result(64 Byte)
1. XDP_TX
a. xdp_geieric, single core
- 2.5Mpps, 100% cpu
b. xdp_driver, single core
- 4.5Mpps, 80% cpu
c. xdp_generic, 8 core(hyper thread)
- 6.3Mpps, 5~10% cpu
d. xdp_driver, 8 core(hyper thread)
- 6.3Mpps, 5% cpu
2. XDP_REDIRECT
a. xdp_generic, single core
- 2.3Mpps
b. xdp_driver, single core
- 4.5Mpps
v4:
- Fix compile warning
v3:
- Change wrong PPS performance result 40% -> 80% in single
core(Intel i3-12100)
- Separate aq_nic_map_xdp() from aq_nic_map_skb()
- Drop multi buffer packets if single buffer XDP is attached
- Disable LRO when single buffer XDP is attached
- Use xdp_get_{frame/buff}_len()
v2:
- Do not use inline in C file
Taehee Yoo (3):
net: atlantic: Implement xdp control plane
net: atlantic: Implement xdp data plane
net: atlantic: Implement .ndo_xdp_xmit handler
.../net/ethernet/aquantia/atlantic/aq_cfg.h | 1 +
.../ethernet/aquantia/atlantic/aq_ethtool.c | 8 +
.../net/ethernet/aquantia/atlantic/aq_main.c | 87 ++++
.../net/ethernet/aquantia/atlantic/aq_main.h | 2 +
.../net/ethernet/aquantia/atlantic/aq_nic.c | 137 ++++++
.../net/ethernet/aquantia/atlantic/aq_nic.h | 5 +
.../net/ethernet/aquantia/atlantic/aq_ring.c | 415 ++++++++++++++++--
.../net/ethernet/aquantia/atlantic/aq_ring.h | 17 +
.../net/ethernet/aquantia/atlantic/aq_vec.c | 23 +-
.../net/ethernet/aquantia/atlantic/aq_vec.h | 6 +
.../aquantia/atlantic/hw_atl/hw_atl_a0.c | 6 +-
.../aquantia/atlantic/hw_atl/hw_atl_b0.c | 10 +-
12 files changed, 675 insertions(+), 42 deletions(-)
--
2.17.1
