On Thu, Apr 07, 2022 at 01:49:02PM +0300, Maxim Mikityanskiy wrote: > On 2022-04-05 14:06, Maciej Fijalkowski wrote: > > Hi! > > > > This is a revival of Bjorn's idea [0] to break NAPI loop when XSK Rx > > queue gets full which in turn makes it impossible to keep on > > successfully producing descriptors to XSK Rx ring. By breaking out of > > the driver side immediately we will give the user space opportunity for > > consuming descriptors from XSK Rx ring and therefore provide room in the > > ring so that HW Rx -> XSK Rx redirection can be done. > > > > Maxim asked and Jesper agreed on simplifying Bjorn's original API used > > for detecting the event of interest, so let's just simply check for > > -ENOBUFS within Intel's ZC drivers after an attempt to redirect a buffer > > to XSK Rx. No real need for redirect API extension. > Hey Maxim! > I believe some of the other comments under the old series [0] might be still > relevant: > > 1. need_wakeup behavior. If need_wakeup is disabled, the expected behavior > is busy-looping in NAPI, you shouldn't break out early, as the application > does not restart NAPI, and the driver restarts it itself, leading to a less > efficient loop. If need_wakeup is enabled, it should be set on ENOBUFS - I > believe this is the case here, right? Good point. We currently set need_wakeup flag for -ENOBUFS case as it is being done for failure == true. You are right that we shouldn't be breaking the loop on -ENOBUFS if need_wakeup flag is not set on xsk_pool, will fix! > > 2. 50/50 AF_XDP and XDP_TX mix usecase. By breaking out early, you prevent > further packets from being XDP_TXed, leading to unnecessary latency > increase. The new feature should be opt-in, otherwise such usecases suffer. Anyone performing a lot of XDP_TX (or XDP_PASS, etc) should be using the regular copy-mode driver, while the zero-copy driver should be used when most packets are sent up to user-space. For the zero-copy driver, this opt in is not necessary. But it sounds like a valid option for copy mode, though could we think about the proper way as a follow up to this work? > > 3. When the driver receives ENOBUFS, it has to drop the packet before > returning to the application. It would be better experience if your feature > saved all N packets from being dropped, not just N-1. Sure, I'll re-run tests and see if we can omit freeing the current xdp_buff and ntc bump, so that we would come back later on to the same entry. > > 4. A slow or malicious AF_XDP application may easily cause an overflow of > the hardware receive ring. Your feature introduces a mechanism to pause the > driver while the congestion is on the application side, but no symmetric > mechanism to pause the application when the driver is close to an overflow. > I don't know the behavior of Intel NICs on overflow, but in our NICs it's > considered a critical error, that is followed by a recovery procedure, so > it's not something that should happen under normal workloads. I'm not sure I follow on this one. Feature is about overflowing the XSK receive ring, not the HW one, right? Driver picks entries from fill ring that were produced by app, so if app is slow on producing those I believe this would be rather an underflow of ring, we would simply receive less frames. For HW Rx ring actually being full, I think that HW would be dropping the incoming frames, so I don't see the real reason to treat this as critical error that needs to go through recovery. Am I missing something? Maybe I have just misunderstood you. > > > One might ask why it is still relevant even after having proper busy > > poll support in place - here is the justification. > > > > For xdpsock that was: > > - run for l2fwd scenario, > > - app/driver processing took place on the same core in busy poll > > with 2048 budget, > > - HW ring sizes Tx 256, Rx 2048, > > > > this work improved throughput by 78% and reduced Rx queue full statistic > > bump by 99%. > > > > For testing ice, make sure that you have [1] present on your side. > > > > This set, besides the work described above, also carries also > > improvements around return codes in various XSK paths and lastly a minor > > optimization for xskq_cons_has_entries(), a helper that might be used > > when XSK Rx batching would make it to the kernel. > > Regarding error codes, I would like them to be consistent across all > drivers, otherwise all the debuggability improvements are not useful enough. > Your series only changed Intel drivers. Here also applies the backward > compatibility concern: the same error codes than were in use have been > repurposed, which may confuse some of existing applications. I'll double check if ZC drivers are doing something unusual with return values from xdp_do_redirect(). Regarding backward comp, I suppose you refer only to changes in ndo_xsk_wakeup() callbacks as others are not exposed to user space? They're not crucial to me, but it improved my debugging experience. FYI, your mail landed in my junk folder and the links [0] [1] are messed up in the reply you sent. And this is true even on lore.kernel.org. They suddenly refer to "nam11.safelinks.protection.outlook.com". Maybe something worth looking into if you have this problem in the future. > > > Thanks! > > MF > > > > [0]: https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Fbpf%2F20200904135332.60259-1-bjorn.topel%40gmail.com%2F&data=04%7C01%7Cmaximmi%40nvidia.com%7Cc9cefaa3a1cd465ccdb908da16f45eaf%7C43083d15727340c1b7db39efd9ccc17a%7C0%7C0%7C637847536077594100%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=sLpTcgboo9YU55wtUtaY1%2F%2FbeiYxeWP5ubk%2FQ6X8vB8%3D&reserved=0 > > [1]: https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Fnetdev%2F20220317175727.340251-1-maciej.fijalkowski%40intel.com%2F&data=04%7C01%7Cmaximmi%40nvidia.com%7Cc9cefaa3a1cd465ccdb908da16f45eaf%7C43083d15727340c1b7db39efd9ccc17a%7C0%7C0%7C637847536077594100%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=OWXeZhc2Nouz%2FTMWBxvtTYbw%2FS8HWQfbfEqnVc5478k%3D&reserved=0 > > > > Björn Töpel (1): > > xsk: improve xdp_do_redirect() error codes > > > > Maciej Fijalkowski (9): > > xsk: diversify return codes in xsk_rcv_check() > > ice: xsk: terminate NAPI when XSK Rx queue gets full > > i40e: xsk: terminate NAPI when XSK Rx queue gets full > > ixgbe: xsk: terminate NAPI when XSK Rx queue gets full > > ice: xsk: diversify return values from xsk_wakeup call paths > > i40e: xsk: diversify return values from xsk_wakeup call paths > > ixgbe: xsk: diversify return values from xsk_wakeup call paths > > ice: xsk: avoid refilling single Rx descriptors > > xsk: drop ternary operator from xskq_cons_has_entries > > > > .../ethernet/intel/i40e/i40e_txrx_common.h | 1 + > > drivers/net/ethernet/intel/i40e/i40e_xsk.c | 27 +++++++++------ > > drivers/net/ethernet/intel/ice/ice_txrx.h | 1 + > > drivers/net/ethernet/intel/ice/ice_xsk.c | 34 ++++++++++++------- > > .../ethernet/intel/ixgbe/ixgbe_txrx_common.h | 1 + > > drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c | 29 ++++++++++------ > > net/xdp/xsk.c | 4 +-- > > net/xdp/xsk_queue.h | 4 +-- > > 8 files changed, 64 insertions(+), 37 deletions(-) > > >
