[PATCH] net: skb: move enum skb_drop_reason to uapi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Menglong Dong <imagedong@xxxxxxxxxxx>

Move the definition of 'enum skb_drop_reason' in 'skbuff.h' to the uapi
header 'net_dropmon.h', therefore some users, such as eBPF program, can
make use of it.

Reviewed-by: Mengen Sun <mengensun@xxxxxxxxxxx>
Reviewed-by: Hao Peng <flyingpeng@xxxxxxxxxxx>
Signed-off-by: Menglong Dong <imagedong@xxxxxxxxxxx>
---
 include/linux/skbuff.h           | 141 +-----------------------------
 include/uapi/linux/net_dropmon.h | 142 ++++++++++++++++++++++++++++++-
 2 files changed, 142 insertions(+), 141 deletions(-)

diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 26538ceb4b01..fcac87a4c917 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -39,6 +39,7 @@
 #include <linux/llist.h>
 #include <net/flow.h>
 #include <net/page_pool.h>
+#include <linux/net_dropmon.h>
 #if IS_ENABLED(CONFIG_NF_CONNTRACK)
 #include <linux/netfilter/nf_conntrack_common.h>
 #endif
@@ -307,146 +308,6 @@ struct sk_buff_head {
 
 struct sk_buff;
 
-/* The reason of skb drop, which is used in kfree_skb_reason().
- * en...maybe they should be splited by group?
- *
- * Each item here should also be in 'TRACE_SKB_DROP_REASON', which is
- * used to translate the reason to string.
- */
-enum skb_drop_reason {
-	SKB_NOT_DROPPED_YET = 0,
-	SKB_DROP_REASON_NOT_SPECIFIED,	/* drop reason is not specified */
-	SKB_DROP_REASON_NO_SOCKET,	/* socket not found */
-	SKB_DROP_REASON_PKT_TOO_SMALL,	/* packet size is too small */
-	SKB_DROP_REASON_TCP_CSUM,	/* TCP checksum error */
-	SKB_DROP_REASON_SOCKET_FILTER,	/* dropped by socket filter */
-	SKB_DROP_REASON_UDP_CSUM,	/* UDP checksum error */
-	SKB_DROP_REASON_NETFILTER_DROP,	/* dropped by netfilter */
-	SKB_DROP_REASON_OTHERHOST,	/* packet don't belong to current
-					 * host (interface is in promisc
-					 * mode)
-					 */
-	SKB_DROP_REASON_IP_CSUM,	/* IP checksum error */
-	SKB_DROP_REASON_IP_INHDR,	/* there is something wrong with
-					 * IP header (see
-					 * IPSTATS_MIB_INHDRERRORS)
-					 */
-	SKB_DROP_REASON_IP_RPFILTER,	/* IP rpfilter validate failed.
-					 * see the document for rp_filter
-					 * in ip-sysctl.rst for more
-					 * information
-					 */
-	SKB_DROP_REASON_UNICAST_IN_L2_MULTICAST, /* destination address of L2
-						  * is multicast, but L3 is
-						  * unicast.
-						  */
-	SKB_DROP_REASON_XFRM_POLICY,	/* xfrm policy check failed */
-	SKB_DROP_REASON_IP_NOPROTO,	/* no support for IP protocol */
-	SKB_DROP_REASON_SOCKET_RCVBUFF,	/* socket receive buff is full */
-	SKB_DROP_REASON_PROTO_MEM,	/* proto memory limition, such as
-					 * udp packet drop out of
-					 * udp_memory_allocated.
-					 */
-	SKB_DROP_REASON_TCP_MD5NOTFOUND,	/* no MD5 hash and one
-						 * expected, corresponding
-						 * to LINUX_MIB_TCPMD5NOTFOUND
-						 */
-	SKB_DROP_REASON_TCP_MD5UNEXPECTED,	/* MD5 hash and we're not
-						 * expecting one, corresponding
-						 * to LINUX_MIB_TCPMD5UNEXPECTED
-						 */
-	SKB_DROP_REASON_TCP_MD5FAILURE,	/* MD5 hash and its wrong,
-					 * corresponding to
-					 * LINUX_MIB_TCPMD5FAILURE
-					 */
-	SKB_DROP_REASON_SOCKET_BACKLOG,	/* failed to add skb to socket
-					 * backlog (see
-					 * LINUX_MIB_TCPBACKLOGDROP)
-					 */
-	SKB_DROP_REASON_TCP_FLAGS,	/* TCP flags invalid */
-	SKB_DROP_REASON_TCP_ZEROWINDOW,	/* TCP receive window size is zero,
-					 * see LINUX_MIB_TCPZEROWINDOWDROP
-					 */
-	SKB_DROP_REASON_TCP_OLD_DATA,	/* the TCP data reveived is already
-					 * received before (spurious retrans
-					 * may happened), see
-					 * LINUX_MIB_DELAYEDACKLOST
-					 */
-	SKB_DROP_REASON_TCP_OVERWINDOW,	/* the TCP data is out of window,
-					 * the seq of the first byte exceed
-					 * the right edges of receive
-					 * window
-					 */
-	SKB_DROP_REASON_TCP_OFOMERGE,	/* the data of skb is already in
-					 * the ofo queue, corresponding to
-					 * LINUX_MIB_TCPOFOMERGE
-					 */
-	SKB_DROP_REASON_IP_OUTNOROUTES,	/* route lookup failed */
-	SKB_DROP_REASON_BPF_CGROUP_EGRESS,	/* dropped by
-						 * BPF_PROG_TYPE_CGROUP_SKB
-						 * eBPF program
-						 */
-	SKB_DROP_REASON_IPV6DISABLED,	/* IPv6 is disabled on the device */
-	SKB_DROP_REASON_NEIGH_CREATEFAIL,	/* failed to create neigh
-						 * entry
-						 */
-	SKB_DROP_REASON_NEIGH_FAILED,	/* neigh entry in failed state */
-	SKB_DROP_REASON_NEIGH_QUEUEFULL,	/* arp_queue for neigh
-						 * entry is full
-						 */
-	SKB_DROP_REASON_NEIGH_DEAD,	/* neigh entry is dead */
-	SKB_DROP_REASON_TC_EGRESS,	/* dropped in TC egress HOOK */
-	SKB_DROP_REASON_QDISC_DROP,	/* dropped by qdisc when packet
-					 * outputting (failed to enqueue to
-					 * current qdisc)
-					 */
-	SKB_DROP_REASON_CPU_BACKLOG,	/* failed to enqueue the skb to
-					 * the per CPU backlog queue. This
-					 * can be caused by backlog queue
-					 * full (see netdev_max_backlog in
-					 * net.rst) or RPS flow limit
-					 */
-	SKB_DROP_REASON_XDP,		/* dropped by XDP in input path */
-	SKB_DROP_REASON_TC_INGRESS,	/* dropped in TC ingress HOOK */
-	SKB_DROP_REASON_PTYPE_ABSENT,	/* not packet_type found to handle
-					 * the skb. For an etner packet,
-					 * this means that L3 protocol is
-					 * not supported
-					 */
-	SKB_DROP_REASON_SKB_CSUM,	/* sk_buff checksum computation
-					 * error
-					 */
-	SKB_DROP_REASON_SKB_GSO_SEG,	/* gso segmentation error */
-	SKB_DROP_REASON_SKB_UCOPY_FAULT,	/* failed to copy data from
-						 * user space, e.g., via
-						 * zerocopy_sg_from_iter()
-						 * or skb_orphan_frags_rx()
-						 */
-	SKB_DROP_REASON_DEV_HDR,	/* device driver specific
-					 * header/metadata is invalid
-					 */
-	/* the device is not ready to xmit/recv due to any of its data
-	 * structure that is not up/ready/initialized, e.g., the IFF_UP is
-	 * not set, or driver specific tun->tfiles[txq] is not initialized
-	 */
-	SKB_DROP_REASON_DEV_READY,
-	SKB_DROP_REASON_FULL_RING,	/* ring buffer is full */
-	SKB_DROP_REASON_NOMEM,		/* error due to OOM */
-	SKB_DROP_REASON_HDR_TRUNC,      /* failed to trunc/extract the header
-					 * from networking data, e.g., failed
-					 * to pull the protocol header from
-					 * frags via pskb_may_pull()
-					 */
-	SKB_DROP_REASON_TAP_FILTER,     /* dropped by (ebpf) filter directly
-					 * attached to tun/tap, e.g., via
-					 * TUNSETFILTEREBPF
-					 */
-	SKB_DROP_REASON_TAP_TXFILTER,	/* dropped by tx filter implemented
-					 * at tun/tap, e.g., check_filter()
-					 */
-	SKB_DROP_REASON_MAX,
-};
-
 /* To allow 64K frame to be packed as single skb without frag_list we
  * require 64K/PAGE_SIZE pages plus 1 additional page to allow for
  * buffers which do not start on a page boundary.
diff --git a/include/uapi/linux/net_dropmon.h b/include/uapi/linux/net_dropmon.h
index 1bbea8f0681e..66092d1e1995 100644
--- a/include/uapi/linux/net_dropmon.h
+++ b/include/uapi/linux/net_dropmon.h
@@ -3,7 +3,7 @@
 #define __NET_DROPMON_H
 
 #include <linux/types.h>
-#include <linux/netlink.h>
+#include <uapi/linux/netlink.h>
 
 struct net_dm_drop_point {
 	__u8 pc[8];
@@ -130,4 +130,144 @@ enum net_dm_origin {
 	NET_DM_ORIGIN_HW,
 };
 
+/* The reason of skb drop, which is used in kfree_skb_reason().
+ * en...maybe they should be splited by group?
+ *
+ * Each item here should also be in 'TRACE_SKB_DROP_REASON', which is
+ * used to translate the reason to string.
+ */
+enum skb_drop_reason {
+	SKB_NOT_DROPPED_YET = 0,
+	SKB_DROP_REASON_NOT_SPECIFIED,	/* drop reason is not specified */
+	SKB_DROP_REASON_NO_SOCKET,	/* socket not found */
+	SKB_DROP_REASON_PKT_TOO_SMALL,	/* packet size is too small */
+	SKB_DROP_REASON_TCP_CSUM,	/* TCP checksum error */
+	SKB_DROP_REASON_SOCKET_FILTER,	/* dropped by socket filter */
+	SKB_DROP_REASON_UDP_CSUM,	/* UDP checksum error */
+	SKB_DROP_REASON_NETFILTER_DROP,	/* dropped by netfilter */
+	SKB_DROP_REASON_OTHERHOST,	/* packet don't belong to current
+					 * host (interface is in promisc
+					 * mode)
+					 */
+	SKB_DROP_REASON_IP_CSUM,	/* IP checksum error */
+	SKB_DROP_REASON_IP_INHDR,	/* there is something wrong with
+					 * IP header (see
+					 * IPSTATS_MIB_INHDRERRORS)
+					 */
+	SKB_DROP_REASON_IP_RPFILTER,	/* IP rpfilter validate failed.
+					 * see the document for rp_filter
+					 * in ip-sysctl.rst for more
+					 * information
+					 */
+	SKB_DROP_REASON_UNICAST_IN_L2_MULTICAST, /* destination address of L2
+						  * is multicast, but L3 is
+						  * unicast.
+						  */
+	SKB_DROP_REASON_XFRM_POLICY,	/* xfrm policy check failed */
+	SKB_DROP_REASON_IP_NOPROTO,	/* no support for IP protocol */
+	SKB_DROP_REASON_SOCKET_RCVBUFF,	/* socket receive buff is full */
+	SKB_DROP_REASON_PROTO_MEM,	/* proto memory limition, such as
+					 * udp packet drop out of
+					 * udp_memory_allocated.
+					 */
+	SKB_DROP_REASON_TCP_MD5NOTFOUND,	/* no MD5 hash and one
+						 * expected, corresponding
+						 * to LINUX_MIB_TCPMD5NOTFOUND
+						 */
+	SKB_DROP_REASON_TCP_MD5UNEXPECTED,	/* MD5 hash and we're not
+						 * expecting one, corresponding
+						 * to LINUX_MIB_TCPMD5UNEXPECTED
+						 */
+	SKB_DROP_REASON_TCP_MD5FAILURE,	/* MD5 hash and its wrong,
+					 * corresponding to
+					 * LINUX_MIB_TCPMD5FAILURE
+					 */
+	SKB_DROP_REASON_SOCKET_BACKLOG,	/* failed to add skb to socket
+					 * backlog (see
+					 * LINUX_MIB_TCPBACKLOGDROP)
+					 */
+	SKB_DROP_REASON_TCP_FLAGS,	/* TCP flags invalid */
+	SKB_DROP_REASON_TCP_ZEROWINDOW,	/* TCP receive window size is zero,
+					 * see LINUX_MIB_TCPZEROWINDOWDROP
+					 */
+	SKB_DROP_REASON_TCP_OLD_DATA,	/* the TCP data reveived is already
+					 * received before (spurious retrans
+					 * may happened), see
+					 * LINUX_MIB_DELAYEDACKLOST
+					 */
+	SKB_DROP_REASON_TCP_OVERWINDOW,	/* the TCP data is out of window,
+					 * the seq of the first byte exceed
+					 * the right edges of receive
+					 * window
+					 */
+	SKB_DROP_REASON_TCP_OFOMERGE,	/* the data of skb is already in
+					 * the ofo queue, corresponding to
+					 * LINUX_MIB_TCPOFOMERGE
+					 */
+	SKB_DROP_REASON_IP_OUTNOROUTES,	/* route lookup failed */
+	SKB_DROP_REASON_BPF_CGROUP_EGRESS,	/* dropped by
+						 * BPF_PROG_TYPE_CGROUP_SKB
+						 * eBPF program
+						 */
+	SKB_DROP_REASON_IPV6DISABLED,	/* IPv6 is disabled on the device */
+	SKB_DROP_REASON_NEIGH_CREATEFAIL,	/* failed to create neigh
+						 * entry
+						 */
+	SKB_DROP_REASON_NEIGH_FAILED,	/* neigh entry in failed state */
+	SKB_DROP_REASON_NEIGH_QUEUEFULL,	/* arp_queue for neigh
+						 * entry is full
+						 */
+	SKB_DROP_REASON_NEIGH_DEAD,	/* neigh entry is dead */
+	SKB_DROP_REASON_TC_EGRESS,	/* dropped in TC egress HOOK */
+	SKB_DROP_REASON_QDISC_DROP,	/* dropped by qdisc when packet
+					 * outputting (failed to enqueue to
+					 * current qdisc)
+					 */
+	SKB_DROP_REASON_CPU_BACKLOG,	/* failed to enqueue the skb to
+					 * the per CPU backlog queue. This
+					 * can be caused by backlog queue
+					 * full (see netdev_max_backlog in
+					 * net.rst) or RPS flow limit
+					 */
+	SKB_DROP_REASON_XDP,		/* dropped by XDP in input path */
+	SKB_DROP_REASON_TC_INGRESS,	/* dropped in TC ingress HOOK */
+	SKB_DROP_REASON_PTYPE_ABSENT,	/* not packet_type found to handle
+					 * the skb. For an etner packet,
+					 * this means that L3 protocol is
+					 * not supported
+					 */
+	SKB_DROP_REASON_SKB_CSUM,	/* sk_buff checksum computation
+					 * error
+					 */
+	SKB_DROP_REASON_SKB_GSO_SEG,	/* gso segmentation error */
+	SKB_DROP_REASON_SKB_UCOPY_FAULT,	/* failed to copy data from
+						 * user space, e.g., via
+						 * zerocopy_sg_from_iter()
+						 * or skb_orphan_frags_rx()
+						 */
+	SKB_DROP_REASON_DEV_HDR,	/* device driver specific
+					 * header/metadata is invalid
+					 */
+	/* the device is not ready to xmit/recv due to any of its data
+	 * structure that is not up/ready/initialized, e.g., the IFF_UP is
+	 * not set, or driver specific tun->tfiles[txq] is not initialized
+	 */
+	SKB_DROP_REASON_DEV_READY,
+	SKB_DROP_REASON_FULL_RING,	/* ring buffer is full */
+	SKB_DROP_REASON_NOMEM,		/* error due to OOM */
+	SKB_DROP_REASON_HDR_TRUNC,	/* failed to trunc/extract the header
+					 * from networking data, e.g., failed
+					 * to pull the protocol header from
+					 * frags via pskb_may_pull()
+					 */
+	SKB_DROP_REASON_TAP_FILTER,	/* dropped by (ebpf) filter directly
+					 * attached to tun/tap, e.g., via
+					 * TUNSETFILTEREBPF
+					 */
+	SKB_DROP_REASON_TAP_TXFILTER,	/* dropped by tx filter implemented
+					 * at tun/tap, e.g., check_filter()
+					 */
+	SKB_DROP_REASON_MAX,
+};
+
 #endif
-- 
2.35.1




[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux