The lirc.h file is an old copy of lirc.h from the kernel sources. It is
out of date, and the bpf lirc tests don't need a new copy anyway. As
long as /usr/include/linux/lirc.h is from kernel v5.2 or newer, the tests
will compile fine.
Signed-off-by: Sean Young <sean@xxxxxxxx>
---
tools/include/uapi/linux/lirc.h | 229 ------------------
.../selftests/bpf/test_lirc_mode2_user.c | 1 -
2 files changed, 230 deletions(-)
delete mode 100644 tools/include/uapi/linux/lirc.h
diff --git a/tools/include/uapi/linux/lirc.h b/tools/include/uapi/linux/lirc.h
deleted file mode 100644
index 45fcbf99d72e..000000000000
--- a/tools/include/uapi/linux/lirc.h
+++ /dev/null
@@ -1,229 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * lirc.h - linux infrared remote control header file
- * last modified 2010/07/13 by Jarod Wilson
- */
-
-#ifndef _LINUX_LIRC_H
-#define _LINUX_LIRC_H
-
-#include <linux/types.h>
-#include <linux/ioctl.h>
-
-#define PULSE_BIT 0x01000000
-#define PULSE_MASK 0x00FFFFFF
-
-#define LIRC_MODE2_SPACE 0x00000000
-#define LIRC_MODE2_PULSE 0x01000000
-#define LIRC_MODE2_FREQUENCY 0x02000000
-#define LIRC_MODE2_TIMEOUT 0x03000000
-
-#define LIRC_VALUE_MASK 0x00FFFFFF
-#define LIRC_MODE2_MASK 0xFF000000
-
-#define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE)
-#define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE)
-#define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY)
-#define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT)
-
-#define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK)
-#define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK)
-
-#define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE)
-#define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE)
-#define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY)
-#define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT)
-
-/* used heavily by lirc userspace */
-#define lirc_t int
-
-/*** lirc compatible hardware features ***/
-
-#define LIRC_MODE2SEND(x) (x)
-#define LIRC_SEND2MODE(x) (x)
-#define LIRC_MODE2REC(x) ((x) << 16)
-#define LIRC_REC2MODE(x) ((x) >> 16)
-
-#define LIRC_MODE_RAW 0x00000001
-#define LIRC_MODE_PULSE 0x00000002
-#define LIRC_MODE_MODE2 0x00000004
-#define LIRC_MODE_SCANCODE 0x00000008
-#define LIRC_MODE_LIRCCODE 0x00000010
-
-
-#define LIRC_CAN_SEND_RAW LIRC_MODE2SEND(LIRC_MODE_RAW)
-#define LIRC_CAN_SEND_PULSE LIRC_MODE2SEND(LIRC_MODE_PULSE)
-#define LIRC_CAN_SEND_MODE2 LIRC_MODE2SEND(LIRC_MODE_MODE2)
-#define LIRC_CAN_SEND_LIRCCODE LIRC_MODE2SEND(LIRC_MODE_LIRCCODE)
-
-#define LIRC_CAN_SEND_MASK 0x0000003f
-
-#define LIRC_CAN_SET_SEND_CARRIER 0x00000100
-#define LIRC_CAN_SET_SEND_DUTY_CYCLE 0x00000200
-#define LIRC_CAN_SET_TRANSMITTER_MASK 0x00000400
-
-#define LIRC_CAN_REC_RAW LIRC_MODE2REC(LIRC_MODE_RAW)
-#define LIRC_CAN_REC_PULSE LIRC_MODE2REC(LIRC_MODE_PULSE)
-#define LIRC_CAN_REC_MODE2 LIRC_MODE2REC(LIRC_MODE_MODE2)
-#define LIRC_CAN_REC_SCANCODE LIRC_MODE2REC(LIRC_MODE_SCANCODE)
-#define LIRC_CAN_REC_LIRCCODE LIRC_MODE2REC(LIRC_MODE_LIRCCODE)
-
-#define LIRC_CAN_REC_MASK LIRC_MODE2REC(LIRC_CAN_SEND_MASK)
-
-#define LIRC_CAN_SET_REC_CARRIER (LIRC_CAN_SET_SEND_CARRIER << 16)
-#define LIRC_CAN_SET_REC_DUTY_CYCLE (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16)
-
-#define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000
-#define LIRC_CAN_SET_REC_CARRIER_RANGE 0x80000000
-#define LIRC_CAN_GET_REC_RESOLUTION 0x20000000
-#define LIRC_CAN_SET_REC_TIMEOUT 0x10000000
-#define LIRC_CAN_SET_REC_FILTER 0x08000000
-
-#define LIRC_CAN_MEASURE_CARRIER 0x02000000
-#define LIRC_CAN_USE_WIDEBAND_RECEIVER 0x04000000
-
-#define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK)
-#define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK)
-
-#define LIRC_CAN_NOTIFY_DECODE 0x01000000
-
-/*** IOCTL commands for lirc driver ***/
-
-#define LIRC_GET_FEATURES _IOR('i', 0x00000000, __u32)
-
-#define LIRC_GET_SEND_MODE _IOR('i', 0x00000001, __u32)
-#define LIRC_GET_REC_MODE _IOR('i', 0x00000002, __u32)
-#define LIRC_GET_REC_RESOLUTION _IOR('i', 0x00000007, __u32)
-
-#define LIRC_GET_MIN_TIMEOUT _IOR('i', 0x00000008, __u32)
-#define LIRC_GET_MAX_TIMEOUT _IOR('i', 0x00000009, __u32)
-
-/* code length in bits, currently only for LIRC_MODE_LIRCCODE */
-#define LIRC_GET_LENGTH _IOR('i', 0x0000000f, __u32)
-
-#define LIRC_SET_SEND_MODE _IOW('i', 0x00000011, __u32)
-#define LIRC_SET_REC_MODE _IOW('i', 0x00000012, __u32)
-/* Note: these can reset the according pulse_width */
-#define LIRC_SET_SEND_CARRIER _IOW('i', 0x00000013, __u32)
-#define LIRC_SET_REC_CARRIER _IOW('i', 0x00000014, __u32)
-#define LIRC_SET_SEND_DUTY_CYCLE _IOW('i', 0x00000015, __u32)
-#define LIRC_SET_TRANSMITTER_MASK _IOW('i', 0x00000017, __u32)
-
-/*
- * when a timeout != 0 is set the driver will send a
- * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is
- * never sent, timeout is disabled by default
- */
-#define LIRC_SET_REC_TIMEOUT _IOW('i', 0x00000018, __u32)
-
-/* 1 enables, 0 disables timeout reports in MODE2 */
-#define LIRC_SET_REC_TIMEOUT_REPORTS _IOW('i', 0x00000019, __u32)
-
-/*
- * if enabled from the next key press on the driver will send
- * LIRC_MODE2_FREQUENCY packets
- */
-#define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32)
-
-/*
- * to set a range use LIRC_SET_REC_CARRIER_RANGE with the
- * lower bound first and later LIRC_SET_REC_CARRIER with the upper bound
- */
-#define LIRC_SET_REC_CARRIER_RANGE _IOW('i', 0x0000001f, __u32)
-
-#define LIRC_SET_WIDEBAND_RECEIVER _IOW('i', 0x00000023, __u32)
-
-/*
- * Return the recording timeout, which is either set by
- * the ioctl LIRC_SET_REC_TIMEOUT or by the kernel after setting the protocols.
- */
-#define LIRC_GET_REC_TIMEOUT _IOR('i', 0x00000024, __u32)
-
-/*
- * struct lirc_scancode - decoded scancode with protocol for use with
- * LIRC_MODE_SCANCODE
- *
- * @timestamp: Timestamp in nanoseconds using CLOCK_MONOTONIC when IR
- * was decoded.
- * @flags: should be 0 for transmit. When receiving scancodes,
- * LIRC_SCANCODE_FLAG_TOGGLE or LIRC_SCANCODE_FLAG_REPEAT can be set
- * depending on the protocol
- * @rc_proto: see enum rc_proto
- * @keycode: the translated keycode. Set to 0 for transmit.
- * @scancode: the scancode received or to be sent
- */
-struct lirc_scancode {
- __u64 timestamp;
- __u16 flags;
- __u16 rc_proto;
- __u32 keycode;
- __u64 scancode;
-};
-
-/* Set if the toggle bit of rc-5 or rc-6 is enabled */
-#define LIRC_SCANCODE_FLAG_TOGGLE 1
-/* Set if this is a nec or sanyo repeat */
-#define LIRC_SCANCODE_FLAG_REPEAT 2
-
-/**
- * enum rc_proto - the Remote Controller protocol
- *
- * @RC_PROTO_UNKNOWN: Protocol not known
- * @RC_PROTO_OTHER: Protocol known but proprietary
- * @RC_PROTO_RC5: Philips RC5 protocol
- * @RC_PROTO_RC5X_20: Philips RC5x 20 bit protocol
- * @RC_PROTO_RC5_SZ: StreamZap variant of RC5
- * @RC_PROTO_JVC: JVC protocol
- * @RC_PROTO_SONY12: Sony 12 bit protocol
- * @RC_PROTO_SONY15: Sony 15 bit protocol
- * @RC_PROTO_SONY20: Sony 20 bit protocol
- * @RC_PROTO_NEC: NEC protocol
- * @RC_PROTO_NECX: Extended NEC protocol
- * @RC_PROTO_NEC32: NEC 32 bit protocol
- * @RC_PROTO_SANYO: Sanyo protocol
- * @RC_PROTO_MCIR2_KBD: RC6-ish MCE keyboard
- * @RC_PROTO_MCIR2_MSE: RC6-ish MCE mouse
- * @RC_PROTO_RC6_0: Philips RC6-0-16 protocol
- * @RC_PROTO_RC6_6A_20: Philips RC6-6A-20 protocol
- * @RC_PROTO_RC6_6A_24: Philips RC6-6A-24 protocol
- * @RC_PROTO_RC6_6A_32: Philips RC6-6A-32 protocol
- * @RC_PROTO_RC6_MCE: MCE (Philips RC6-6A-32 subtype) protocol
- * @RC_PROTO_SHARP: Sharp protocol
- * @RC_PROTO_XMP: XMP protocol
- * @RC_PROTO_CEC: CEC protocol
- * @RC_PROTO_IMON: iMon Pad protocol
- * @RC_PROTO_RCMM12: RC-MM protocol 12 bits
- * @RC_PROTO_RCMM24: RC-MM protocol 24 bits
- * @RC_PROTO_RCMM32: RC-MM protocol 32 bits
- */
-enum rc_proto {
- RC_PROTO_UNKNOWN = 0,
- RC_PROTO_OTHER = 1,
- RC_PROTO_RC5 = 2,
- RC_PROTO_RC5X_20 = 3,
- RC_PROTO_RC5_SZ = 4,
- RC_PROTO_JVC = 5,
- RC_PROTO_SONY12 = 6,
- RC_PROTO_SONY15 = 7,
- RC_PROTO_SONY20 = 8,
- RC_PROTO_NEC = 9,
- RC_PROTO_NECX = 10,
- RC_PROTO_NEC32 = 11,
- RC_PROTO_SANYO = 12,
- RC_PROTO_MCIR2_KBD = 13,
- RC_PROTO_MCIR2_MSE = 14,
- RC_PROTO_RC6_0 = 15,
- RC_PROTO_RC6_6A_20 = 16,
- RC_PROTO_RC6_6A_24 = 17,
- RC_PROTO_RC6_6A_32 = 18,
- RC_PROTO_RC6_MCE = 19,
- RC_PROTO_SHARP = 20,
- RC_PROTO_XMP = 21,
- RC_PROTO_CEC = 22,
- RC_PROTO_IMON = 23,
- RC_PROTO_RCMM12 = 24,
- RC_PROTO_RCMM24 = 25,
- RC_PROTO_RCMM32 = 26,
-};
-
-#endif
diff --git a/tools/testing/selftests/bpf/test_lirc_mode2_user.c b/tools/testing/selftests/bpf/test_lirc_mode2_user.c
index ebf68dce5504..2893e9f2f1e0 100644
--- a/tools/testing/selftests/bpf/test_lirc_mode2_user.c
+++ b/tools/testing/selftests/bpf/test_lirc_mode2_user.c
@@ -28,7 +28,6 @@
// 5. We can read keycode from same /dev/lirc device
#include <linux/bpf.h>
-#include <linux/lirc.h>
#include <linux/input.h>
#include <errno.h>
#include <stdio.h>
--
2.34.1
