From: Maciej Fijalkowski <maciej.fijalkowski@xxxxxxxxx>
The descriptor that ntu is pointing at when we exit
ice_alloc_rx_bufs_zc() should not have its corresponding DD bit cleared
as descriptor is not allocated in there and it is not valid for HW
usage.
The allocation routine at the entry will fill the descriptor that ntu
points to after it was set to ntu + nb_buffs on previous call.
Even the spec says:
"The tail pointer should be set to one descriptor beyond the last empty
descriptor in host descriptor ring."
Therefore, step away from clearing the status_error0 on ntu + nb_buffs
descriptor.
Fixes: db804cfc21e9 ("ice: Use the xsk batched rx allocation interface")
Reported-by: Elza Mathew <elza.mathew@xxxxxxxxx>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@xxxxxxxxx>
Tested-by: Kiran Bhandare <kiranx.bhandare@xxxxxxxxx>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@xxxxxxxxx>
---
drivers/net/ethernet/intel/ice/ice_xsk.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_xsk.c b/drivers/net/ethernet/intel/ice/ice_xsk.c
index 27f5f64dcbd6..ffa9a160766a 100644
--- a/drivers/net/ethernet/intel/ice/ice_xsk.c
+++ b/drivers/net/ethernet/intel/ice/ice_xsk.c
@@ -395,13 +395,9 @@ bool ice_alloc_rx_bufs_zc(struct ice_rx_ring *rx_ring, u16 count)
}
ntu += nb_buffs;
- if (ntu == rx_ring->count) {
- rx_desc = ICE_RX_DESC(rx_ring, 0);
+ if (ntu == rx_ring->count)
ntu = 0;
- }
- /* clear the status bits for the next_to_use descriptor */
- rx_desc->wb.status_error0 = 0;
ice_release_rx_desc(rx_ring, ntu);
return count == nb_buffs;
--
2.31.1
