On 11/15/21 9:42 PM, Kumar Kartikeya Dwivedi wrote:
This change adds eBPF iterator for buffers registered in io_uring ctx.
It gives access to the ctx, the index of the registered buffer, and a
pointer to the io_uring_ubuf itself. This allows the iterator to save
info related to buffers added to an io_uring instance, that isn't easy
to export using the fdinfo interface (like exact struct page composing
the registered buffer).
The primary usecase this is enabling is checkpoint/restore support.
Note that we need to use mutex_trylock when the file is read from, in
seq_start functions, as the order of lock taken is opposite of what it
would be when io_uring operation reads the same file. We take
seq_file->lock, then ctx->uring_lock, while io_uring would first take
ctx->uring_lock and then seq_file->lock for the same ctx.
This can lead to a deadlock scenario described below:
CPU 0 CPU 1
vfs_read
mutex_lock(&seq_file->lock) io_read
mutex_lock(&ctx->uring_lock)
mutex_lock(&ctx->uring_lock) # switched to mutex_trylock
mutex_lock(&seq_file->lock)
It is not clear which mutex_lock switched to mutex_trylock.
From below example, it looks like &ctx->uring_lock. But if this is
the case, we could have deadlock, right?
The trylock also protects the case where io_uring tries to read from
iterator attached to itself (same ctx), where the order of locks would
be:
io_uring_enter
mutex_lock(&ctx->uring_lock) <-----------.
io_read \
seq_read \
mutex_lock(&seq_file->lock) /
mutex_lock(&ctx->uring_lock) # deadlock-`
In both these cases (recursive read and contended uring_lock), -EDEADLK
is returned to userspace.
In the future, this iterator will be extended to directly support
iteration of bvec Flexible Array Member, so that when there is no
corresponding VMA that maps to the registered buffer (e.g. if VMA is
destroyed after pinning pages), we are able to reconstruct the
registration on restore by dumping the page contents and then replaying
them into a temporary mapping used for registration later. All this is
out of scope for the current series however, but builds upon this
iterator.
Cc: Jens Axboe <axboe@xxxxxxxxx>
Cc: Pavel Begunkov <asml.silence@xxxxxxxxx>
Cc: io-uring@xxxxxxxxxxxxxxx
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@xxxxxxxxx>
---
fs/io_uring.c | 179 +++++++++++++++++++++++++++++++++
include/linux/bpf.h | 2 +
include/uapi/linux/bpf.h | 3 +
tools/include/uapi/linux/bpf.h | 3 +
4 files changed, 187 insertions(+)
diff --git a/fs/io_uring.c b/fs/io_uring.c
index b07196b4511c..46a110989155 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -81,6 +81,7 @@
#include <linux/tracehook.h>
#include <linux/audit.h>
#include <linux/security.h>
+#include <linux/btf_ids.h>
#define CREATE_TRACE_POINTS
#include <trace/events/io_uring.h>
@@ -11125,3 +11126,181 @@ static int __init io_uring_init(void)
return 0;
};
__initcall(io_uring_init);
+
+#ifdef CONFIG_BPF_SYSCALL
+
+BTF_ID_LIST(btf_io_uring_ids)
+BTF_ID(struct, io_ring_ctx)
+BTF_ID(struct, io_mapped_ubuf)
+
+struct bpf_io_uring_seq_info {
+ struct io_ring_ctx *ctx;
+ unsigned long index;
+};
+
+static int bpf_io_uring_init_seq(void *priv_data, struct bpf_iter_aux_info *aux)
+{
+ struct bpf_io_uring_seq_info *info = priv_data;
+ struct io_ring_ctx *ctx = aux->ctx;
+
+ info->ctx = ctx;
+ return 0;
+}
+
+static int bpf_io_uring_iter_attach(struct bpf_prog *prog,
+ union bpf_iter_link_info *linfo,
+ struct bpf_iter_aux_info *aux)
+{
+ struct io_ring_ctx *ctx;
+ struct fd f;
+ int ret;
+
+ f = fdget(linfo->io_uring.io_uring_fd);
+ if (unlikely(!f.file))
+ return -EBADF;
+
+ ret = -EOPNOTSUPP;
+ if (unlikely(f.file->f_op != &io_uring_fops))
+ goto out_fput;
+
+ ret = -ENXIO;
+ ctx = f.file->private_data;
+ if (unlikely(!percpu_ref_tryget(&ctx->refs)))
+ goto out_fput;
+
+ ret = 0;
+ aux->ctx = ctx;
+
+out_fput:
+ fdput(f);
+ return ret;
+}
+
+static void bpf_io_uring_iter_detach(struct bpf_iter_aux_info *aux)
+{
+ percpu_ref_put(&aux->ctx->refs);
+}
+
+/* io_uring iterator for registered buffers */
+
+struct bpf_iter__io_uring_buf {
+ __bpf_md_ptr(struct bpf_iter_meta *, meta);
+ __bpf_md_ptr(struct io_ring_ctx *, ctx);
+ __bpf_md_ptr(struct io_mapped_ubuf *, ubuf);
+ unsigned long index;
+};
I would suggest to change "unsigned long index" to either u32 or u64.
This structure is also the bpf program context and in bpf program
context, "index" will be u64. Then on 32bit system, we potentially
could have issues.
+
+static void *__bpf_io_uring_buf_seq_get_next(struct bpf_io_uring_seq_info *info)
+{
+ if (info->index < info->ctx->nr_user_bufs)
+ return info->ctx->user_bufs[info->index++];
+ return NULL;
+}
+
+static void *bpf_io_uring_buf_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ struct bpf_io_uring_seq_info *info = seq->private;
+ struct io_mapped_ubuf *ubuf;
+
+ /* Indicate to userspace that the uring lock is contended */
+ if (!mutex_trylock(&info->ctx->uring_lock))
+ return ERR_PTR(-EDEADLK);
+
+ ubuf = __bpf_io_uring_buf_seq_get_next(info);
+ if (!ubuf)
+ return NULL;
+
+ if (*pos == 0)
+ ++*pos;
+ return ubuf;
+}
+
+static void *bpf_io_uring_buf_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ struct bpf_io_uring_seq_info *info = seq->private;
+
+ ++*pos;
+ return __bpf_io_uring_buf_seq_get_next(info);
+}
+
+DEFINE_BPF_ITER_FUNC(io_uring_buf, struct bpf_iter_meta *meta,
+ struct io_ring_ctx *ctx, struct io_mapped_ubuf *ubuf,
+ unsigned long index)
Again, change "unsigned long" to "u32" or "u64".
+
+static int __bpf_io_uring_buf_seq_show(struct seq_file *seq, void *v, bool in_stop)
+{
+ struct bpf_io_uring_seq_info *info = seq->private;
+ struct bpf_iter__io_uring_buf ctx;
+ struct bpf_iter_meta meta;
+ struct bpf_prog *prog;
+
+ meta.seq = seq;
+ prog = bpf_iter_get_info(&meta, in_stop);
+ if (!prog)
+ return 0;
+
+ ctx.meta = &meta;
+ ctx.ctx = info->ctx;
+ ctx.ubuf = v;
+ ctx.index = info->index ? info->index - !in_stop : 0;
+
+ return bpf_iter_run_prog(prog, &ctx);
+}
+
+static int bpf_io_uring_buf_seq_show(struct seq_file *seq, void *v)
+{
+ return __bpf_io_uring_buf_seq_show(seq, v, false);
+}
+
+static void bpf_io_uring_buf_seq_stop(struct seq_file *seq, void *v)
+{
+ struct bpf_io_uring_seq_info *info = seq->private;
+
+ /* If IS_ERR(v) is true, then ctx->uring_lock wasn't taken */
+ if (IS_ERR(v))
+ return;
+ if (!v)
+ __bpf_io_uring_buf_seq_show(seq, v, true);
+ else if (info->index) /* restart from index */
+ info->index--;
+ mutex_unlock(&info->ctx->uring_lock);
+}
+
+static const struct seq_operations bpf_io_uring_buf_seq_ops = {
+ .start = bpf_io_uring_buf_seq_start,
+ .next = bpf_io_uring_buf_seq_next,
+ .stop = bpf_io_uring_buf_seq_stop,
+ .show = bpf_io_uring_buf_seq_show,
+};
+
+static const struct bpf_iter_seq_info bpf_io_uring_buf_seq_info = {
+ .seq_ops = &bpf_io_uring_buf_seq_ops,
+ .init_seq_private = bpf_io_uring_init_seq,
+ .fini_seq_private = NULL,
+ .seq_priv_size = sizeof(struct bpf_io_uring_seq_info),
+};
+
+static struct bpf_iter_reg io_uring_buf_reg_info = {
+ .target = "io_uring_buf",
+ .feature = BPF_ITER_RESCHED,
+ .attach_target = bpf_io_uring_iter_attach,
+ .detach_target = bpf_io_uring_iter_detach,
Since you have this extra `io_uring_fd` for the iterator, you may want
to implement show_fdinfo and fill_link_info callback functions here.
+ .ctx_arg_info_size = 2,
+ .ctx_arg_info = {
+ { offsetof(struct bpf_iter__io_uring_buf, ctx),
+ PTR_TO_BTF_ID },
+ { offsetof(struct bpf_iter__io_uring_buf, ubuf),
+ PTR_TO_BTF_ID_OR_NULL },
+ },
+ .seq_info = &bpf_io_uring_buf_seq_info,
+};
+
+static int __init io_uring_iter_init(void)
+{
+ io_uring_buf_reg_info.ctx_arg_info[0].btf_id = btf_io_uring_ids[0];
+ io_uring_buf_reg_info.ctx_arg_info[1].btf_id = btf_io_uring_ids[1];
+ return bpf_iter_reg_target(&io_uring_buf_reg_info);
+}
+late_initcall(io_uring_iter_init);
+
+#endif
diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index 56098c866704..ddb9d4520a3f 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -1509,8 +1509,10 @@ int bpf_obj_get_user(const char __user *pathname, int flags);
extern int bpf_iter_ ## target(args); \
int __init bpf_iter_ ## target(args) { return 0; }
+struct io_ring_ctx;
struct bpf_iter_aux_info {
struct bpf_map *map;
+ struct io_ring_ctx *ctx;
};
Can we use union here? Note that below bpf_iter_link_info in
uapi/linux/bpf.h, map_fd and io_uring_fd is also an union.
typedef int (*bpf_iter_attach_target_t)(struct bpf_prog *prog,
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 6297eafdc40f..3323defa99a1 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -91,6 +91,9 @@ union bpf_iter_link_info {
struct {
__u32 map_fd;
} map;
+ struct {
+ __u32 io_uring_fd;
+ } io_uring;
};
/* BPF syscall commands, see bpf(2) man-page for more details. */
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index 6297eafdc40f..3323defa99a1 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -91,6 +91,9 @@ union bpf_iter_link_info {
struct {
__u32 map_fd;
} map;
+ struct {
+ __u32 io_uring_fd;
+ } io_uring;
};
/* BPF syscall commands, see bpf(2) man-page for more details. */
