On 6/12/21 5:07 PM, Tony Ambardar wrote:
On Fri, 11 Jun 2021 at 08:57, Yonghong Song <yhs@xxxxxx> wrote:
On 6/10/21 6:02 PM, Tony Ambardar wrote:
Hello,
I encountered an NPE and kernel Oops [1] while running the
'test_verifier' selftest on MIPS32 with LTS kernel 5.10.41. This was
observed during development of a MIPS32 JIT but is verifier-related.
Initial troubleshooting [2] points to an unchecked NULL dereference in
btf_type_by_id(), with an unexpected BTF type ID. The root cause is
unclear, whether source of the ID or a potential underlying BTF
problem.
Do you know what is the faulty btf ID number? What is the maximum id
for vmlinux BTF?
Thanks for the suggestions, Yonghong.
I had built/packaged bpftool for the target, which shows the maximum as:
root@OpenWrt:~# bpftool btf dump file /sys/kernel/btf/vmlinux format
raw|tail -5
[43179] FUNC 'pci_load_of_ranges' type_id=43178 linkage=static
[43180] ARRAY '(anon)' type_id=23 index_type_id=23 nr_elems=16
[43181] FUNC 'pcibios_plat_dev_init' type_id=29264 linkage=static
[43182] FUNC 'pcibios_map_irq' type_id=29815 linkage=static
[43183] FUNC 'mips_pcibios_init' type_id=115 linkage=static
After adding NULL handling and debug pr_err() to kernel_type_name(), I next see:
root@OpenWrt:~# ./test_verifier_eb 828
[ 87.196692] btf_type_by_id(btf_vmlinux, 3062497280) returns NULL
[ 87.196958] btf_type_by_id(btf_vmlinux, 2936995840) returns NULL
#828/p reference tracking: bpf_sk_release(btf_tcp_sock) FAIL
Those large type ids make me suspect an endianness issue, even though bpftool
can still properly access the vmlinux BTF. Changing byte order and
looking up the
resulting type ids seems to confirm this:
Check endianness:
3062497280 -> 0xB68A0000 --swap endian--> 0x00008AB6 -> 35510
bpftool btf dump file /sys/kernel/btf/vmlinux format raw|fgrep "[35510]":
[35510] STRUCT 'tcp_sock' size=1752 vlen=136
Check endianness:
2936995840 -> 0xAF0F0000 --swap endian--> 0x00000FAF -> 4015
bpftool btf dump file /sys/kernel/btf/vmlinux format raw|fgrep "[4015]":
[4015] STRUCT 'sock_common' size=112 vlen=25
As a further test, I repeated "test_verifier 828" across mips{32,64}{be,le}
systems and confirm seeing the problem only with the big-endian ones.
From the above information, looks like vmlinux BTF is correct.
Below resolve_btfids command output seems indicating the btf_id list
is also correct.
The kernel_type_name is used in a few places for verifier verbose output.
$ grep kernel_type_name kernel/bpf/verifier.c
static const char *kernel_type_name(const struct btf* btf, u32 id)
verbose(env, "%s",
kernel_type_name(reg->btf, reg->btf_id));
regno, kernel_type_name(reg->btf,
reg->btf_id),
kernel_type_name(btf_vmlinux,
*arg_btf_id));
The most suspicous target is reg->btf_id, which is propagated from
the result of bpf_sk_lookup_tcp() helper.
The involved helper is bpf_sk_release.
static const struct bpf_func_proto bpf_sk_release_proto = {
.func = bpf_sk_release,
.gpl_only = false,
.ret_type = RET_INTEGER,
.arg1_type = ARG_PTR_TO_BTF_ID_SOCK_COMMON,
};
Eventually, the btf_id is taken from btf_sock_ids[6] where
btf_sock_ids is a kernel global variable.
Could you check btf_sock_ids[6] to see whether the number
makes sense?
What I see matches the second btf_type_by_id() NULL call above:
[ 56.556121] btf_sock_ids[6]: 2936995840
The id is computed by resolve_btfids in
tools/bpf/resolve_btfids, you might add verbose mode to your linux build
to get more information.
The verbose build didn't print any details of the btf ids. Was there anything
special to do in invocation? I manually ran "resolve_btfids -v vmlinux" from
the build dir and this, strangely, gave slightly different results than bpftool
but not the huge endian-swapped type ids. Is this expected?
# ./tools/bpf/resolve_btfids/resolve_btfids -v vmlinux
...
patching addr 116: ID 35522 [tcp_sock]
...
patching addr 112: ID 4021 [sock_common]
Do any of the details above help narrow down things? What do you suggest
for next steps?
We need to identify issues by dumping detailed verifier logs.
Could you apply the following change?
--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -1088,7 +1088,7 @@ static void do_test_single(struct bpf_test *test,
bool unpriv,
attr.insns_cnt = prog_len;
attr.license = "GPL";
if (verbose)
- attr.log_level = 1;
+ attr.log_level = 3;
else if (expected_ret == VERBOSE_ACCEPT)
attr.log_level = 2;
else
Run command like `./test_verifier -v 828 828`?
I attached the verifier output for x86_64.
Maybe by comparing x86 output vs. mips32 output, you can
find which insn starts to have *wrong* verifier state
and then we can go from there.
Thanks,
Tony
Has this been seen before? How best to debug this further or resolve?
What other details would be useful for BPF kernel developers?
Thanks for any help,
Tony
[1]:
(Host details)
kodidev:~/openwrt-project$ ./staging_dir/host/bin/pahole --version
v1.21
(Target details)
root@OpenWrt:/# uname -a
Linux OpenWrt 5.10.41 #0 SMP Tue Jun 1 00:54:31 2021 mips GNU/Linux
root@OpenWrt:~# sysctl net.core.bpf_jit_enable=0; ./test_verifier 826 828
net.core.bpf_jit_enable = 0
#826/p reference tracking: branch tracking valid pointer null comparison OK
#827/p reference tracking: branch tracking valid pointer value comparison OK
CPU 0 Unable to handle kernel paging request at virtual address
00000000, epc == 80244654, ra == 80244654
Oops[#1]:
CPU: 0 PID: 16274 Comm: test_verifier Not tainted 5.10.41 #0
$ 0 : 00000000 00000001 00000000 0000a8a2
$ 4 : 835ac580 a6280000 00000000 00000001
$ 8 : 835ac580 a6280000 00000000 02020202
$12 : 8348de58 834ba800 00000000 00000000
$16 : 835ac580 8098be2c fffffff3 834bdb38
$20 : 8098be0c 00000001 00000018 00000000
$24 : 00000000 01415415
$28 : 834bc000 834bdac8 00000005 80244654
Hi : 00000017
Lo : 0a3d70a2
epc : 80244654 kernel_type_name+0x20/0x38
ra : 80244654 kernel_type_name+0x20/0x38
Status: 1000a403 KERNEL EXL IE
Cause : 00800008 (ExcCode 02)
BadVA : 00000000
PrId : 00019300 (MIPS 24Kc)
Modules linked in: pppoe ppp_async pppox ppp_generic mac80211_hwsim
mac80211 iptable_nat ipt_REJECT cfg80211 xt_time xt_tcpudp xt_tcpmss
xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac
xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack
xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT
xt_MASQUERADE xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY
slhc sch_mqprio sch_cake pcnet32 nf_reject_ipv4 nf_nat nf_log_ipv4
nf_flow_table nf_conntrack_netlink nf_conncount iptable_raw
iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat
cls_flower act_vlan pktgen sch_teql sch_sfq sch_red sch_prio sch_pie
sch_multiq sch_gred sch_fq sch_dsmark sch_codel em_text em_nbyte
em_meta em_cmp act_simple act_police act_pedit act_ipt act_csum
libcrc32c em_ipset cls_bpf act_bpf act_ctinfo act_connmark
nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 sch_tbf sch_ingress sch_htb
sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw
cls_flow cls_basic act_skbedit act_mirred act_gact xt_set
ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport
ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net
ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip
ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip
ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set
nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter
ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ifb dummy netlink_diag
mii
Process test_verifier (pid: 16274, threadinfo=c1418596, task=05765195,
tls=77e5aec8)
Stack : 83428000 83428000 8098be2c 00000000 83428000 8024af78 834bacdc 834bb000
a98a0000 834e2580 834e2c00 00000000 834e2c00 8023da9c 834bb070 00000013
80925164 80924f44 00000000 80925164 00000000 83428140 80bc3864 834bb070
834e2c00 00000000 00000010 802c441c 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000056 00000000 00000000
...
Call Trace:
[<80244654>] kernel_type_name+0x20/0x38
[<8024af78>] check_helper_call+0x1c9c/0x1dbc
[<8024d008>] do_check_common+0x1f70/0x2a3c
[<8024fb6c>] bpf_check+0x18f8/0x2308
[<802369ec>] bpf_prog_load+0x378/0x860
[<80237e1c>] __do_sys_bpf+0x3e0/0x2100
[<801142d8>] syscall_common+0x34/0x58
Code: afbf0014 0c099b58 02002025 <8c450000> 8fbf0014 02002025
8fb00010 08099b4f 27bd0018
---[ end trace ab13ac5f89eb825b ]---
Kernel panic - not syncing: Fatal exception
Rebooting in 3 seconds..
QEMU: Terminated
[2]:
Function Code:
==============
const char *kernel_type_name(u32 id)
{
return btf_name_by_offset(btf_vmlinux,
btf_type_by_id(btf_vmlinux, id)->name_off);
}
const struct btf_type *btf_type_by_id(const struct btf *btf, u32 type_id)
{
if (type_id > btf->nr_types)
return NULL;
return btf->types[type_id];
}
Disassembled Code:
==================
0x0000000000000000: AF BF 00 14 sw $ra, 0x14($sp)
0x0000000000000004: 0C 09 9B 58 jal btf_type_by_id
0x0000000000000008: 02 00 20 25 move $a0, $s0
0x000000000000000c: 8C 45 00 00 lw $a1, ($v0) <-- NPE
0x0000000000000010: 8F BF 00 14 lw $ra, 0x14($sp)
0x0000000000000014: 02 00 20 25 move $a0, $s0
0x0000000000000018: 8F B0 00 10 lw $s0, 0x10($sp)
0x000000000000001c: 08 09 9B 4F j btf_name_by_offset
0x0000000000000020: 27 BD 00 18 addiu $sp, $sp, 0x18
#828/p reference tracking: alloc, check, free in both subbranches , verifier log:
func#0 @0
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (61) r2 = *(u32 *)(r1 +76)
1: R1=ctx(id=0,off=0,imm=0) R2_w=pkt(id=0,off=0,r=0,imm=0) R10=fp0
1: (61) r3 = *(u32 *)(r1 +80)
2: R1=ctx(id=0,off=0,imm=0) R2_w=pkt(id=0,off=0,r=0,imm=0) R3_w=pkt_end(id=0,off=0,imm=0) R10=fp0
2: (bf) r0 = r2
3: R0_w=pkt(id=0,off=0,r=0,imm=0) R1=ctx(id=0,off=0,imm=0) R2_w=pkt(id=0,off=0,r=0,imm=0) R3_w=pkt_end(id=0,off=0,imm=0) R10=fp0
3: (07) r0 += 16
4: R0_w=pkt(id=0,off=16,r=0,imm=0) R1=ctx(id=0,off=0,imm=0) R2_w=pkt(id=0,off=0,r=0,imm=0) R3_w=pkt_end(id=0,off=0,imm=0) R10=fp0
4: (bd) if r0 <= r3 goto pc+1
R0_w=pkt(id=0,off=16,r=-2,imm=0) R1=ctx(id=0,off=0,imm=0) R2_w=pkt(id=0,off=0,r=0,imm=0) R3_w=pkt_end(id=0,off=0,imm=0) R10=fp0
5: R0_w=pkt(id=0,off=16,r=-2,imm=0) R1=ctx(id=0,off=0,imm=0) R2_w=pkt(id=0,off=0,r=0,imm=0) R3_w=pkt_end(id=0,off=0,imm=0) R10=fp0
5: (95) exit
6: R0_w=pkt(id=0,off=16,r=16,imm=0) R1=ctx(id=0,off=0,imm=0) R2_w=pkt(id=0,off=0,r=16,imm=0) R3_w=pkt_end(id=0,off=0,imm=0) R10=fp0
6: (61) r6 = *(u32 *)(r2 +8)
7: R0_w=pkt(id=0,off=16,r=16,imm=0) R1=ctx(id=0,off=0,imm=0) R2_w=pkt(id=0,off=0,r=16,imm=0) R3_w=pkt_end(id=0,off=0,imm=0) R6_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
7: (b7) r2 = 0
8: R0_w=pkt(id=0,off=16,r=16,imm=0) R1=ctx(id=0,off=0,imm=0) R2_w=inv0 R3_w=pkt_end(id=0,off=0,imm=0) R6_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
8: (63) *(u32 *)(r10 -8) = r2
last_idx 8 first_idx 0
regs=4 stack=0 before 7: (b7) r2 = 0
9: R0_w=pkt(id=0,off=16,r=16,imm=0) R1=ctx(id=0,off=0,imm=0) R2_w=invP0 R3_w=pkt_end(id=0,off=0,imm=0) R6_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 fp-8=????0000
9: (7b) *(u64 *)(r10 -16) = r2
10: R0_w=pkt(id=0,off=16,r=16,imm=0) R1=ctx(id=0,off=0,imm=0) R2_w=invP0 R3_w=pkt_end(id=0,off=0,imm=0) R6_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 fp-8=????0000 fp-16_w=00000000
10: (7b) *(u64 *)(r10 -24) = r2
11: R0_w=pkt(id=0,off=16,r=16,imm=0) R1=ctx(id=0,off=0,imm=0) R2_w=invP0 R3_w=pkt_end(id=0,off=0,imm=0) R6_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000
11: (7b) *(u64 *)(r10 -32) = r2
12: R0_w=pkt(id=0,off=16,r=16,imm=0) R1=ctx(id=0,off=0,imm=0) R2_w=invP0 R3_w=pkt_end(id=0,off=0,imm=0) R6_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000 fp-32_w=00000000
12: (7b) *(u64 *)(r10 -40) = r2
13: R0_w=pkt(id=0,off=16,r=16,imm=0) R1=ctx(id=0,off=0,imm=0) R2_w=invP0 R3_w=pkt_end(id=0,off=0,imm=0) R6_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000
13: (7b) *(u64 *)(r10 -48) = r2
14: R0_w=pkt(id=0,off=16,r=16,imm=0) R1=ctx(id=0,off=0,imm=0) R2_w=invP0 R3_w=pkt_end(id=0,off=0,imm=0) R6_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
14: (bf) r2 = r10
15: R0_w=pkt(id=0,off=16,r=16,imm=0) R1=ctx(id=0,off=0,imm=0) R2_w=fp0 R3_w=pkt_end(id=0,off=0,imm=0) R6_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
15: (07) r2 += -48
16: R0_w=pkt(id=0,off=16,r=16,imm=0) R1=ctx(id=0,off=0,imm=0) R2_w=fp-48 R3_w=pkt_end(id=0,off=0,imm=0) R6_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
16: (b7) r3 = 36
17: R0_w=pkt(id=0,off=16,r=16,imm=0) R1=ctx(id=0,off=0,imm=0) R2_w=fp-48 R3_w=inv36 R6_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
17: (b7) r4 = 0
18: R0_w=pkt(id=0,off=16,r=16,imm=0) R1=ctx(id=0,off=0,imm=0) R2_w=fp-48 R3_w=inv36 R4_w=inv0 R6_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
18: (b7) r5 = 0
19: R0_w=pkt(id=0,off=16,r=16,imm=0) R1=ctx(id=0,off=0,imm=0) R2_w=fp-48 R3_w=inv36 R4_w=inv0 R5_w=inv0 R6_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
19: (85) call bpf_sk_lookup_tcp#84
last_idx 19 first_idx 0
regs=8 stack=0 before 18: (b7) r5 = 0
regs=8 stack=0 before 17: (b7) r4 = 0
regs=8 stack=0 before 16: (b7) r3 = 36
20: R0=sock_or_null(id=2,ref_obj_id=2,off=0,imm=0) R6=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
20: (15) if r6 == 0x0 goto pc+4
R0=sock_or_null(id=2,ref_obj_id=2,off=0,imm=0) R6=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
21: R0=sock_or_null(id=2,ref_obj_id=2,off=0,imm=0) R6=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
21: (15) if r0 == 0x0 goto pc+2
R0=sock(id=0,ref_obj_id=2,off=0,imm=0) R6=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
22: R0=sock(id=0,ref_obj_id=2,off=0,imm=0) R6=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
22: (bf) r1 = r0
23: R0=sock(id=0,ref_obj_id=2,off=0,imm=0) R1_w=sock(id=0,ref_obj_id=2,off=0,imm=0) R6=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
23: (85) call bpf_sk_release#86
24: R0_w=inv(id=0) R6=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm
24: (95) exit
24: R0=inv0 R6=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm
24: (95) exit
25: R0=sock_or_null(id=2,ref_obj_id=2,off=0,imm=0) R6=inv0 R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
25: (15) if r0 == 0x0 goto pc+2
R0=sock(id=0,ref_obj_id=2,off=0,imm=0) R6=inv0 R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
26: R0=sock(id=0,ref_obj_id=2,off=0,imm=0) R6=inv0 R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
26: (bf) r1 = r0
27: R0=sock(id=0,ref_obj_id=2,off=0,imm=0) R1_w=sock(id=0,ref_obj_id=2,off=0,imm=0) R6=inv0 R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
27: (85) call bpf_sk_release#86
28: R0=inv(id=0) R6=inv0 R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm
28: (95) exit
from 25 to 28: safe
processed 31 insns (limit 1000000) max_states_per_insn 0 total_states 2 peak_states 2 mark_read 1
OK
Summary: 1 PASSED, 0 SKIPPED, 0 FAILED
