SPH functionality splits header and payload according to split mode and
offsef fields (SPLM and SPLOFST). It is beneficials for Linux network
stack RX processing however it adds a lot of complexity in XDP
processing.
So, this patch makes the split-header (SPH) capability of the controller
is stored in "priv->sph_cap" and the enabling/disabling of SPH is decided
by "priv->sph".
This is to prepare initial XDP enabling for stmmac to disable the use of
SPH whenever XDP is enabled.
Signed-off-by: Ong Boon Leong <boon.leong.ong@xxxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 1 +
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 12 +++++++-----
2 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 9966f6f10905..e293423f98c3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -160,6 +160,7 @@ struct stmmac_priv {
bool tx_path_in_lpi_mode;
bool tso;
int sph;
+ int sph_cap;
u32 sarc_type;
unsigned int dma_buf_sz;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index d34388b1ffcc..ace3c3835a9f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2858,6 +2858,7 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
struct stmmac_priv *priv = netdev_priv(dev);
u32 rx_cnt = priv->plat->rx_queues_to_use;
u32 tx_cnt = priv->plat->tx_queues_to_use;
+ bool sph_en;
u32 chan;
int ret;
@@ -2952,10 +2953,10 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
}
/* Enable Split Header */
- if (priv->sph && priv->hw->rx_csum) {
- for (chan = 0; chan < rx_cnt; chan++)
- stmmac_enable_sph(priv, priv->ioaddr, 1, chan);
- }
+ sph_en = (priv->hw->rx_csum > 0) && priv->sph;
+ for (chan = 0; chan < rx_cnt; chan++)
+ stmmac_enable_sph(priv, priv->ioaddr, sph_en, chan);
+
/* VLAN Tag Insertion */
if (priv->dma_cap.vlins)
@@ -5697,7 +5698,8 @@ int stmmac_dvr_probe(struct device *device,
if (priv->dma_cap.sphen) {
ndev->hw_features |= NETIF_F_GRO;
- priv->sph = true;
+ priv->sph_cap = true;
+ priv->sph = priv->sph_cap;
dev_info(priv->device, "SPH feature enabled\n");
}
--
2.25.1
