Introduce high-level descriptions of the intent and return codes of the
bpf() syscall commands. Subsequent patches may further flesh out the
content to provide a more useful programming reference.
Acked-by: Toke Høiland-Jørgensen <toke@xxxxxxxxxx>
Reviewed-by: Quentin Monnet <quentin@xxxxxxxxxxxxx>
Signed-off-by: Joe Stringer <joe@xxxxxxxxx>
---
include/uapi/linux/bpf.h | 368 +++++++++++++++++++++++++++++++++++++++
1 file changed, 368 insertions(+)
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index fb16c590e6d9..052bbfe65f77 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -204,6 +204,374 @@ union bpf_iter_link_info {
* A new file descriptor (a nonnegative integer), or -1 if an
* error occurred (in which case, *errno* is set appropriately).
*
+ * BPF_OBJ_PIN
+ * Description
+ * Pin an eBPF program or map referred by the specified *bpf_fd*
+ * to the provided *pathname* on the filesystem.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_OBJ_GET
+ * Description
+ * Open a file descriptor for the eBPF object pinned to the
+ * specified *pathname*.
+ *
+ * Return
+ * A new file descriptor (a nonnegative integer), or -1 if an
+ * error occurred (in which case, *errno* is set appropriately).
+ *
+ * BPF_PROG_ATTACH
+ * Description
+ * Attach an eBPF program to a *target_fd* at the specified
+ * *attach_type* hook.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_PROG_DETACH
+ * Description
+ * Detach the eBPF program associated with the *target_fd* at the
+ * hook specified by *attach_type*. The program must have been
+ * previously attached using **BPF_PROG_ATTACH**.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_PROG_TEST_RUN
+ * Description
+ * Run an eBPF program a number of times against a provided
+ * program context and return the modified program context and
+ * duration of the test run.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_PROG_GET_NEXT_ID
+ * Description
+ * Fetch the next eBPF program currently loaded into the kernel.
+ *
+ * Looks for the eBPF program with an id greater than *start_id*
+ * and updates *next_id* on success. If no other eBPF programs
+ * remain with ids higher than *start_id*, returns -1 and sets
+ * *errno* to **ENOENT**.
+ *
+ * Return
+ * Returns zero on success. On error, or when no id remains, -1
+ * is returned and *errno* is set appropriately.
+ *
+ * BPF_MAP_GET_NEXT_ID
+ * Description
+ * Fetch the next eBPF map currently loaded into the kernel.
+ *
+ * Looks for the eBPF map with an id greater than *start_id*
+ * and updates *next_id* on success. If no other eBPF maps
+ * remain with ids higher than *start_id*, returns -1 and sets
+ * *errno* to **ENOENT**.
+ *
+ * Return
+ * Returns zero on success. On error, or when no id remains, -1
+ * is returned and *errno* is set appropriately.
+ *
+ * BPF_PROG_GET_FD_BY_ID
+ * Description
+ * Open a file descriptor for the eBPF program corresponding to
+ * *prog_id*.
+ *
+ * Return
+ * A new file descriptor (a nonnegative integer), or -1 if an
+ * error occurred (in which case, *errno* is set appropriately).
+ *
+ * BPF_MAP_GET_FD_BY_ID
+ * Description
+ * Open a file descriptor for the eBPF map corresponding to
+ * *map_id*.
+ *
+ * Return
+ * A new file descriptor (a nonnegative integer), or -1 if an
+ * error occurred (in which case, *errno* is set appropriately).
+ *
+ * BPF_OBJ_GET_INFO_BY_FD
+ * Description
+ * Obtain information about the eBPF object corresponding to
+ * *bpf_fd*.
+ *
+ * Populates up to *info_len* bytes of *info*, which will be in
+ * one of the following formats depending on the eBPF object type
+ * of *bpf_fd*:
+ *
+ * * **struct bpf_prog_info**
+ * * **struct bpf_map_info**
+ * * **struct bpf_btf_info**
+ * * **struct bpf_link_info**
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_PROG_QUERY
+ * Description
+ * Obtain information about eBPF programs associated with the
+ * specified *attach_type* hook.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_RAW_TRACEPOINT_OPEN
+ * Description
+ * Attach an eBPF program to a tracepoint *name* to access kernel
+ * internal arguments of the tracepoint in their raw form.
+ *
+ * The *prog_fd* must be a valid file descriptor associated with
+ * a loaded eBPF program of type **BPF_PROG_TYPE_RAW_TRACEPOINT**.
+ *
+ * No ABI guarantees are made about the content of tracepoint
+ * arguments exposed to the corresponding eBPF program.
+ *
+ * Applying **close**\ (2) to the file descriptor returned by
+ * **BPF_RAW_TRACEPOINT_OPEN** will delete the map (but see NOTES).
+ *
+ * Return
+ * A new file descriptor (a nonnegative integer), or -1 if an
+ * error occurred (in which case, *errno* is set appropriately).
+ *
+ * BPF_BTF_LOAD
+ * Description
+ * Verify and load BPF Type Format (BTF) metadata into the kernel,
+ * returning a new file descriptor associated with the metadata.
+ * BTF is described in more detail at
+ * https://www.kernel.org/doc/html/latest/bpf/btf.html.
+ *
+ * The *btf* parameter must point to valid memory providing
+ * *btf_size* bytes of BTF binary metadata.
+ *
+ * The returned file descriptor can be passed to other **bpf**\ ()
+ * subcommands such as **BPF_PROG_LOAD** or **BPF_MAP_CREATE** to
+ * associate the BTF with those objects.
+ *
+ * Similar to **BPF_PROG_LOAD**, **BPF_BTF_LOAD** has optional
+ * parameters to specify a *btf_log_buf*, *btf_log_size* and
+ * *btf_log_level* which allow the kernel to return freeform log
+ * output regarding the BTF verification process.
+ *
+ * Return
+ * A new file descriptor (a nonnegative integer), or -1 if an
+ * error occurred (in which case, *errno* is set appropriately).
+ *
+ * BPF_BTF_GET_FD_BY_ID
+ * Description
+ * Open a file descriptor for the BPF Type Format (BTF)
+ * corresponding to *btf_id*.
+ *
+ * Return
+ * A new file descriptor (a nonnegative integer), or -1 if an
+ * error occurred (in which case, *errno* is set appropriately).
+ *
+ * BPF_TASK_FD_QUERY
+ * Description
+ * Obtain information about eBPF programs associated with the
+ * target process identified by *pid* and *fd*.
+ *
+ * If the *pid* and *fd* are associated with a tracepoint, kprobe
+ * or uprobe perf event, then the *prog_id* and *fd_type* will
+ * be populated with the eBPF program id and file descriptor type
+ * of type **bpf_task_fd_type**. If associated with a kprobe or
+ * uprobe, the *probe_offset* and *probe_addr* will also be
+ * populated. Optionally, if *buf* is provided, then up to
+ * *buf_len* bytes of *buf* will be populated with the name of
+ * the tracepoint, kprobe or uprobe.
+ *
+ * The resulting *prog_id* may be introspected in deeper detail
+ * using **BPF_PROG_GET_FD_BY_ID** and **BPF_OBJ_GET_INFO_BY_FD**.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_MAP_LOOKUP_AND_DELETE_ELEM
+ * Description
+ * Look up an element with the given *key* in the map referred to
+ * by the file descriptor *fd*, and if found, delete the element.
+ *
+ * The **BPF_MAP_TYPE_QUEUE** and **BPF_MAP_TYPE_STACK** map types
+ * implement this command as a "pop" operation, deleting the top
+ * element rather than one corresponding to *key*.
+ * The *key* and *key_len* parameters should be zeroed when
+ * issuing this operation for these map types.
+ *
+ * This command is only valid for the following map types:
+ * * **BPF_MAP_TYPE_QUEUE**
+ * * **BPF_MAP_TYPE_STACK**
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_MAP_FREEZE
+ * Description
+ * Freeze the permissions of the specified map.
+ *
+ * Write permissions may be frozen by passing zero *flags*.
+ * Upon success, no future syscall invocations may alter the
+ * map state of *map_fd*. Write operations from eBPF programs
+ * are still possible for a frozen map.
+ *
+ * Not supported for maps of type **BPF_MAP_TYPE_STRUCT_OPS**.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_BTF_GET_NEXT_ID
+ * Description
+ * Fetch the next BPF Type Format (BTF) object currently loaded
+ * into the kernel.
+ *
+ * Looks for the BTF object with an id greater than *start_id*
+ * and updates *next_id* on success. If no other BTF objects
+ * remain with ids higher than *start_id*, returns -1 and sets
+ * *errno* to **ENOENT**.
+ *
+ * Return
+ * Returns zero on success. On error, or when no id remains, -1
+ * is returned and *errno* is set appropriately.
+ *
+ * BPF_MAP_LOOKUP_BATCH
+ * Description
+ * Iterate and fetch multiple elements in a map.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_MAP_LOOKUP_AND_DELETE_BATCH
+ * Description
+ * Iterate and delete multiple elements in a map.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_MAP_UPDATE_BATCH
+ * Description
+ * Iterate and update multiple elements in a map.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_MAP_DELETE_BATCH
+ * Description
+ * Iterate and delete multiple elements in a map.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_LINK_CREATE
+ * Description
+ * Attach an eBPF program to a *target_fd* at the specified
+ * *attach_type* hook and return a file descriptor handle for
+ * managing the link.
+ *
+ * Return
+ * A new file descriptor (a nonnegative integer), or -1 if an
+ * error occurred (in which case, *errno* is set appropriately).
+ *
+ * BPF_LINK_UPDATE
+ * Description
+ * Update the eBPF program in the specified *link_fd* to
+ * *new_prog_fd*.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_LINK_GET_FD_BY_ID
+ * Description
+ * Open a file descriptor for the eBPF Link corresponding to
+ * *link_id*.
+ *
+ * Return
+ * A new file descriptor (a nonnegative integer), or -1 if an
+ * error occurred (in which case, *errno* is set appropriately).
+ *
+ * BPF_LINK_GET_NEXT_ID
+ * Description
+ * Fetch the next eBPF link currently loaded into the kernel.
+ *
+ * Looks for the eBPF link with an id greater than *start_id*
+ * and updates *next_id* on success. If no other eBPF links
+ * remain with ids higher than *start_id*, returns -1 and sets
+ * *errno* to **ENOENT**.
+ *
+ * Return
+ * Returns zero on success. On error, or when no id remains, -1
+ * is returned and *errno* is set appropriately.
+ *
+ * BPF_ENABLE_STATS
+ * Description
+ * Enable eBPF runtime statistics gathering.
+ *
+ * Runtime statistics gathering for the eBPF runtime is disabled
+ * by default to minimize the corresponding performance overhead.
+ * This command enables statistics globally.
+ *
+ * Multiple programs may independently enable statistics.
+ * After gathering the desired statistics, eBPF runtime statistics
+ * may be disabled again by calling **close**\ (2) for the file
+ * descriptor returned by this function. Statistics will only be
+ * disabled system-wide when all outstanding file descriptors
+ * returned by prior calls for this subcommand are closed.
+ *
+ * Return
+ * A new file descriptor (a nonnegative integer), or -1 if an
+ * error occurred (in which case, *errno* is set appropriately).
+ *
+ * BPF_ITER_CREATE
+ * Description
+ * Create an iterator on top of the specified *link_fd* (as
+ * previously created using **BPF_LINK_CREATE**) and return a
+ * file descriptor that can be used to trigger the iteration.
+ *
+ * If the resulting file descriptor is pinned to the filesystem
+ * using **BPF_OBJ_PIN**, then subsequent **read**\ (2) syscalls
+ * for that path will trigger the iterator to read kernel state
+ * using the eBPF program attached to *link_fd*.
+ *
+ * Return
+ * A new file descriptor (a nonnegative integer), or -1 if an
+ * error occurred (in which case, *errno* is set appropriately).
+ *
+ * BPF_LINK_DETACH
+ * Description
+ * Forcefully detach the specified *link_fd* from its
+ * corresponding attachment point.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_PROG_BIND_MAP
+ * Description
+ * Bind a map to the lifetime of an eBPF program.
+ *
+ * The map identified by *map_fd* is bound to the program
+ * identified by *prog_fd* and only released when *prog_fd* is
+ * released. This may be used in cases where metadata should be
+ * associated with a program which otherwise does not contain any
+ * references to the map (for example, embedded in the eBPF
+ * program instructions).
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
* NOTES
* eBPF objects (maps and programs) can be shared between processes.
* For example, after **fork**\ (2), the child inherits file descriptors
--
2.27.0
