Re: [PATCH v2 bpf-next] net: veth: alloc skb in bulk for ndo_xdp_xmit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Jan 29, Jesper Dangaard Brouer wrote:
> On Fri, 29 Jan 2021 17:02:16 +0100
> Jesper Dangaard Brouer <brouer@xxxxxxxxxx> wrote:
> 
> > > +	for (i = 0; i < n_skb; i++) {
> > > +		struct sk_buff *skb = skbs[i];
> > > +
> > > +		memset(skb, 0, offsetof(struct sk_buff, tail));  
> > 
> > It is very subtle, but the memset operation on Intel CPU translates
> > into a "rep stos" (repeated store) operation.  This operation need to
> > save CPU-flags (to support being interrupted) thus it is actually
> > expensive (and in my experience cause side effects on pipeline
> > efficiency).  I have a kernel module for testing memset here[1].
> > 
> > In CPUMAP I have moved the clearing outside this loop. But via asking
> > the MM system to clear the memory via gfp_t flag __GFP_ZERO.  This
> > cause us to clear more memory 256 bytes, but it is aligned.  Above
> > offsetof(struct sk_buff, tail) is 188 bytes, which is unaligned making
> > the rep-stos more expensive in setup time.  It is below 3-cachelines,
> > which is actually interesting and an improvement since last I checked.
> > I actually have to re-test with time_bench_memset[1], to know that is
> > better now.
> 
> After much testing (with [1]), yes please use gfp_t flag __GFP_ZERO.

I run some comparison tests using memset and __GFP_ZERO and with VETH_XDP_BATCH
set to 8 and 16. Results are pretty close so not completely sure the delta is
just a noise:

- VETH_XDP_BATCH= 8 + __GFP_ZERO: ~3.737Mpps
- VETH_XDP_BATCH= 16 + __GFP_ZERO: ~3.79Mpps
- VETH_XDP_BATCH= 8 + memset: ~3.766Mpps
- VETH_XDP_BATCH= 16 + __GFP_ZERO: ~3.765Mpps

Regards,
Lorenzo

> 
>  SKB: offsetof-tail:184 bytes
>   - memset_skb_tail Per elem: 37 cycles(tsc) 10.463 ns
> 
>  SKB: ROUNDUP(offsetof-tail: 192)
>   - memset_skb_tail_roundup Per elem: 37 cycles(tsc) 10.468 ns
> 
> I though it would be better/faster to round up to full cachelines, but
> measurements show that the cost was the same for 184 vs 192.  It does
> validate the theory that it is the cacheline boundary that is important.
> 
> When doing the gfp_t flag __GFP_ZERO, the kernel cannot know the
> constant size, and instead end up calling memset_erms().
> 
> The cost of memset_erms(256) is:
>  - memset_variable_step(256) Per elem: 31 cycles(tsc) 8.803 ns
> 
> The const version with 256 that uses rep-stos cost more:
>  - memset_256 Per elem: 41 cycles(tsc) 11.552 ns
> 
> 
> Below not relevant for your patch, but an interesting data point is
> that memset_erms(512) only cost 4 cycles more:
>  - memset_variable_step(512) Per elem: 35 cycles(tsc) 9.893 ns
> 
> (but don't use rep-stos for const 512 it is 72 cycles(tsc) 20.069 ns.)
> 
> [1] https://github.com/netoptimizer/prototype-kernel/blob/master/kernel/lib/time_bench_memset.c
> CPU: Intel(R) Xeon(R) CPU E5-1650 v4 @ 3.60GHz
> -- 
> Best regards,
>   Jesper Dangaard Brouer
>   MSc.CS, Principal Kernel Engineer at Red Hat
>   LinkedIn: http://www.linkedin.com/in/brouer
> 

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux