From: Xuan Zhuo <xuanzhuo@xxxxxxxxxxxxxxxxx>
Date: Fri, 22 Jan 2021 23:36:29 +0800
> On Fri, 22 Jan 2021 12:08:00 +0000, Alexander Lobakin <alobakin@xxxxx> wrote:
> > From: Alexander Lobakin <alobakin@xxxxx>
> > Date: Fri, 22 Jan 2021 11:55:35 +0000
> >
> > > From: Alexander Lobakin <alobakin@xxxxx>
> > > Date: Fri, 22 Jan 2021 11:47:45 +0000
> > >
> > > > From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
> > > > Date: Thu, 21 Jan 2021 16:41:33 +0100
> > > >
> > > > > On 1/21/21 2:47 PM, Xuan Zhuo wrote:
> > > > > > This patch is used to construct skb based on page to save memory copy
> > > > > > overhead.
> > > > > >
> > > > > > This function is implemented based on IFF_TX_SKB_NO_LINEAR. Only the
> > > > > > network card priv_flags supports IFF_TX_SKB_NO_LINEAR will use page to
> > > > > > directly construct skb. If this feature is not supported, it is still
> > > > > > necessary to copy data to construct skb.
> > > > > >
> > > > > > ---------------- Performance Testing ------------
> > > > > >
> > > > > > The test environment is Aliyun ECS server.
> > > > > > Test cmd:
> > > > > > ```
> > > > > > xdpsock -i eth0 -t -S -s <msg size>
> > > > > > ```
> > > > > >
> > > > > > Test result data:
> > > > > >
> > > > > > size 64 512 1024 1500
> > > > > > copy 1916747 1775988 1600203 1440054
> > > > > > page 1974058 1953655 1945463 1904478
> > > > > > percent 3.0% 10.0% 21.58% 32.3%
> > > > > >
> > > > > > Signed-off-by: Xuan Zhuo <xuanzhuo@xxxxxxxxxxxxxxxxx>
> > > > > > Reviewed-by: Dust Li <dust.li@xxxxxxxxxxxxxxxxx>
> > > > > > ---
> > > > > > net/xdp/xsk.c | 104 ++++++++++++++++++++++++++++++++++++++++++++++++----------
> > > > > > 1 file changed, 86 insertions(+), 18 deletions(-)
> > > > > >
> > > > > > diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
> > > > > > index 4a83117..38af7f1 100644
> > > > > > --- a/net/xdp/xsk.c
> > > > > > +++ b/net/xdp/xsk.c
> > > > > > @@ -430,6 +430,87 @@ static void xsk_destruct_skb(struct sk_buff *skb)
> > > > > > sock_wfree(skb);
> > > > > > }
> > > > > >
> > > > > > +static struct sk_buff *xsk_build_skb_zerocopy(struct xdp_sock *xs,
> > > > > > + struct xdp_desc *desc)
> > > > > > +{
> > > > > > + u32 len, offset, copy, copied;
> > > > > > + struct sk_buff *skb;
> > > > > > + struct page *page;
> > > > > > + void *buffer;
> > > > > > + int err, i;
> > > > > > + u64 addr;
> > > > > > +
> > > > > > + skb = sock_alloc_send_skb(&xs->sk, 0, 1, &err);
> >
> > Also,
> > maybe we should allocate it with NET_SKB_PAD so NIC drivers could
> > use some reserved space?
> >
> > skb = sock_alloc_send_skb(&xs->sk, NET_SKB_PAD, 1, &err);
> > ...
> > skb_reserve(skb, NET_SKB_PAD);
> >
> > Eric, what do you think?
>
> I think you are right. Some space should be added to continuous equipment. This
> space should also be added in the copy mode below. Is LL_RESERVED_SPACE more
> appropriate?
No. If you look at __netdev_alloc_skb() and __napi_alloc_skb(), they
reserve NET_SKB_PAD at the beginning of linear area. Documentation of
__build_skb() also says that driver should reserve NET_SKB_PAD before
the actual frame, so it is a standartized hardware-independent
headroom.
Leaving that space in skb->head will allow developers to implement
IFF_TX_SKB_NO_LINEAR in a wider variety of drivers, especially when
a driver has to prepend some sort of data before the actual frame.
Since it's usually of a size of one cacheline, shouldn't be a big
deal.
[ I also had an idea of allocating an skb with a headroom of
NET_SKB_PAD + 256 bytes, so nearly all drivers could just call
pskb_pull_tail() to support such type of skbuffs without much
effort, but I think that it's better to teach drivers to support
xmitting of really headless ones. If virtio_net can do it, why
shouldn't the others ]
> > > > > > + if (unlikely(!skb))
> > > > > > + return ERR_PTR(err);
> > > > > > +
> > > > > > + addr = desc->addr;
> > > > > > + len = desc->len;
> > > > > > +
> > > > > > + buffer = xsk_buff_raw_get_data(xs->pool, addr);
> > > > > > + offset = offset_in_page(buffer);
> > > > > > + addr = buffer - xs->pool->addrs;
> > > > > > +
> > > > > > + for (copied = 0, i = 0; copied < len; i++) {
> > > > > > + page = xs->pool->umem->pgs[addr >> PAGE_SHIFT];
> > > > > > +
> > > > > > + get_page(page);
> > > > > > +
> > > > > > + copy = min_t(u32, PAGE_SIZE - offset, len - copied);
> > > > > > +
> > > > > > + skb_fill_page_desc(skb, i, page, offset, copy);
> > > > > > +
> > > > > > + copied += copy;
> > > > > > + addr += copy;
> > > > > > + offset = 0;
> > > > > > + }
> > > > > > +
> > > > > > + skb->len += len;
> > > > > > + skb->data_len += len;
> > > > >
> > > > > > + skb->truesize += len;
> > > > >
> > > > > This is not the truesize, unfortunately.
> > > > >
> > > > > We need to account for the number of pages, not number of bytes.
> > > >
> > > > The easiest solution is:
> > > >
> > > > skb->truesize += PAGE_SIZE * i;
> > > >
> > > > i would be equal to skb_shinfo(skb)->nr_frags after exiting the loop.
> > >
> > > Oops, pls ignore this. I forgot that XSK buffers are not
> > > "one per page".
> > > We need to count the number of pages manually and then do
> > >
> > > skb->truesize += PAGE_SIZE * npages;
> > >
> > > Right.
> > >
> > > > > > +
> > > > > > + refcount_add(len, &xs->sk.sk_wmem_alloc);
> > > > > > +
> > > > > > + return skb;
> > > > > > +}
> > > > > > +
> > > >
> > > > Al
> > >
> > > Thanks,
> > > Al
> >
> > Al
