From: Alexei Starovoitov <ast@xxxxxxxxxx>
The llvm register allocator may use two different registers representing the
same virtual register. In such case the following pattern can be observed:
1047: (bf) r9 = r6
1048: (a5) if r6 < 0x1000 goto pc+1
1050: ...
1051: (a5) if r9 < 0x2 goto pc+66
1052: ...
1053: (bf) r2 = r9 /* r2 needs to have upper and lower bounds */
In order to track this information without backtracking allocate ID
for scalars in a similar way as it's done for find_good_pkt_pointers().
When the verifier encounters r9 = r6 assignment it will assign the same ID
to both registers. Later if either register range is narrowed via conditional
jump propagate the register state into the other register.
Clear register ID in adjust_reg_min_max_vals() for any alu instruction.
Newly allocated register ID is ignored for scalars in regsafe() and doesn't
affect state pruning. mark_reg_unknown() also clears the ID.
Signed-off-by: Alexei Starovoitov <ast@xxxxxxxxxx>
---
kernel/bpf/verifier.c | 38 +++++++++++++++++++
.../testing/selftests/bpf/prog_tests/align.c | 16 ++++----
.../bpf/verifier/direct_packet_access.c | 2 +-
3 files changed, 47 insertions(+), 9 deletions(-)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 01120acab09a..09e17b483b0b 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -6432,6 +6432,8 @@ static int adjust_reg_min_max_vals(struct bpf_verifier_env *env,
src_reg = NULL;
if (dst_reg->type != SCALAR_VALUE)
ptr_reg = dst_reg;
+ else
+ dst_reg->id = 0;
if (BPF_SRC(insn->code) == BPF_X) {
src_reg = ®s[insn->src_reg];
if (src_reg->type != SCALAR_VALUE) {
@@ -6565,6 +6567,8 @@ static int check_alu_op(struct bpf_verifier_env *env, struct bpf_insn *insn)
/* case: R1 = R2
* copy register state to dest reg
*/
+ if (src_reg->type == SCALAR_VALUE)
+ src_reg->id = ++env->id_gen;
*dst_reg = *src_reg;
dst_reg->live |= REG_LIVE_WRITTEN;
dst_reg->subreg_def = DEF_NOT_SUBREG;
@@ -7365,6 +7369,30 @@ static bool try_match_pkt_pointers(const struct bpf_insn *insn,
return true;
}
+static void find_equal_scalars(struct bpf_verifier_state *vstate,
+ struct bpf_reg_state *known_reg)
+{
+ struct bpf_func_state *state;
+ struct bpf_reg_state *reg;
+ int i, j;
+
+ for (i = 0; i <= vstate->curframe; i++) {
+ state = vstate->frame[i];
+ for (j = 0; j < MAX_BPF_REG; j++) {
+ reg = &state->regs[j];
+ if (reg->type == SCALAR_VALUE && reg->id == known_reg->id)
+ *reg = *known_reg;
+ }
+
+ bpf_for_each_spilled_reg(j, state, reg) {
+ if (!reg)
+ continue;
+ if (reg->type == SCALAR_VALUE && reg->id == known_reg->id)
+ *reg = *known_reg;
+ }
+ }
+}
+
static int check_cond_jmp_op(struct bpf_verifier_env *env,
struct bpf_insn *insn, int *insn_idx)
{
@@ -7493,6 +7521,11 @@ static int check_cond_jmp_op(struct bpf_verifier_env *env,
reg_combine_min_max(&other_branch_regs[insn->src_reg],
&other_branch_regs[insn->dst_reg],
src_reg, dst_reg, opcode);
+ if (src_reg->id) {
+ find_equal_scalars(this_branch, src_reg);
+ find_equal_scalars(other_branch, &other_branch_regs[insn->src_reg]);
+ }
+
}
} else if (dst_reg->type == SCALAR_VALUE) {
reg_set_min_max(&other_branch_regs[insn->dst_reg],
@@ -7500,6 +7533,11 @@ static int check_cond_jmp_op(struct bpf_verifier_env *env,
opcode, is_jmp32);
}
+ if (dst_reg->type == SCALAR_VALUE && dst_reg->id) {
+ find_equal_scalars(this_branch, dst_reg);
+ find_equal_scalars(other_branch, &other_branch_regs[insn->dst_reg]);
+ }
+
/* detect if R == 0 where R is returned from bpf_map_lookup_elem().
* NOTE: these optimizations below are related with pointer comparison
* which will never be JMP32.
diff --git a/tools/testing/selftests/bpf/prog_tests/align.c b/tools/testing/selftests/bpf/prog_tests/align.c
index c548aded6585..56a414ce5504 100644
--- a/tools/testing/selftests/bpf/prog_tests/align.c
+++ b/tools/testing/selftests/bpf/prog_tests/align.c
@@ -195,13 +195,13 @@ static struct bpf_align_test tests[] = {
.prog_type = BPF_PROG_TYPE_SCHED_CLS,
.matches = {
{7, "R3_w=inv(id=0,umax_value=255,var_off=(0x0; 0xff))"},
- {8, "R4_w=inv(id=0,umax_value=255,var_off=(0x0; 0xff))"},
+ {8, "R4_w=inv(id=1,umax_value=255,var_off=(0x0; 0xff))"},
{9, "R4_w=inv(id=0,umax_value=255,var_off=(0x0; 0xff))"},
- {10, "R4_w=inv(id=0,umax_value=255,var_off=(0x0; 0xff))"},
+ {10, "R4_w=inv(id=2,umax_value=255,var_off=(0x0; 0xff))"},
{11, "R4_w=inv(id=0,umax_value=510,var_off=(0x0; 0x1fe))"},
- {12, "R4_w=inv(id=0,umax_value=255,var_off=(0x0; 0xff))"},
+ {12, "R4_w=inv(id=3,umax_value=255,var_off=(0x0; 0xff))"},
{13, "R4_w=inv(id=0,umax_value=1020,var_off=(0x0; 0x3fc))"},
- {14, "R4_w=inv(id=0,umax_value=255,var_off=(0x0; 0xff))"},
+ {14, "R4_w=inv(id=4,umax_value=255,var_off=(0x0; 0xff))"},
{15, "R4_w=inv(id=0,umax_value=2040,var_off=(0x0; 0x7f8))"},
{16, "R4_w=inv(id=0,umax_value=4080,var_off=(0x0; 0xff0))"},
},
@@ -518,7 +518,7 @@ static struct bpf_align_test tests[] = {
* the total offset is 4-byte aligned and meets the
* load's requirements.
*/
- {20, "R5=pkt(id=1,off=0,r=4,umin_value=2,umax_value=1034,var_off=(0x2; 0x7fc)"},
+ {20, "R5=pkt(id=2,off=0,r=4,umin_value=2,umax_value=1034,var_off=(0x2; 0x7fc)"},
},
},
@@ -561,18 +561,18 @@ static struct bpf_align_test tests[] = {
/* Adding 14 makes R6 be (4n+2) */
{11, "R6_w=inv(id=0,umin_value=14,umax_value=74,var_off=(0x2; 0x7c))"},
/* Subtracting from packet pointer overflows ubounds */
- {13, "R5_w=pkt(id=1,off=0,r=8,umin_value=18446744073709551542,umax_value=18446744073709551602,var_off=(0xffffffffffffff82; 0x7c)"},
+ {13, "R5_w=pkt(id=2,off=0,r=8,umin_value=18446744073709551542,umax_value=18446744073709551602,var_off=(0xffffffffffffff82; 0x7c)"},
/* New unknown value in R7 is (4n), >= 76 */
{15, "R7_w=inv(id=0,umin_value=76,umax_value=1096,var_off=(0x0; 0x7fc))"},
/* Adding it to packet pointer gives nice bounds again */
- {16, "R5_w=pkt(id=2,off=0,r=0,umin_value=2,umax_value=1082,var_off=(0x2; 0xfffffffc)"},
+ {16, "R5_w=pkt(id=3,off=0,r=0,umin_value=2,umax_value=1082,var_off=(0x2; 0xfffffffc)"},
/* At the time the word size load is performed from R5,
* its total fixed offset is NET_IP_ALIGN + reg->off (0)
* which is 2. Then the variable offset is (4n+2), so
* the total offset is 4-byte aligned and meets the
* load's requirements.
*/
- {20, "R5=pkt(id=2,off=0,r=4,umin_value=2,umax_value=1082,var_off=(0x2; 0xfffffffc)"},
+ {20, "R5=pkt(id=3,off=0,r=4,umin_value=2,umax_value=1082,var_off=(0x2; 0xfffffffc)"},
},
},
};
diff --git a/tools/testing/selftests/bpf/verifier/direct_packet_access.c b/tools/testing/selftests/bpf/verifier/direct_packet_access.c
index 2c5fbe7bcd27..ae72536603fe 100644
--- a/tools/testing/selftests/bpf/verifier/direct_packet_access.c
+++ b/tools/testing/selftests/bpf/verifier/direct_packet_access.c
@@ -529,7 +529,7 @@
},
.prog_type = BPF_PROG_TYPE_SCHED_CLS,
.result = REJECT,
- .errstr = "invalid access to packet, off=0 size=8, R5(id=1,off=0,r=0)",
+ .errstr = "invalid access to packet, off=0 size=8, R5(id=2,off=0,r=0)",
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
},
{
--
2.23.0
