Re: For review: seccomp_user_notif(2) manual page

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Sep 30, 2020 at 05:53:46PM +0200, Jann Horn via Containers wrote:
> On Wed, Sep 30, 2020 at 1:07 PM Michael Kerrisk (man-pages)
> <mtk.manpages@xxxxxxxxx> wrote:
> > I knew it would be a big ask, but below is kind of the manual page
> > I was hoping you might write [1] for the seccomp user-space notification
> > mechanism. Since you didn't (and because 5.9 adds various new pieces
> > such as SECCOMP_ADDFD_FLAG_SETFD and SECCOMP_IOCTL_NOTIF_ADDFD
> > that also will need documenting [2]), I did :-). But of course I may
> > have made mistakes...
> [...]
> > NAME
> >        seccomp_user_notif - Seccomp user-space notification mechanism
> >
> > SYNOPSIS
> >        #include <linux/seccomp.h>
> >        #include <linux/filter.h>
> >        #include <linux/audit.h>
> >
> >        int seccomp(unsigned int operation, unsigned int flags, void *args);
> 
> Should the ioctl() calls be listed here, similar to e.g. the SYNOPSIS
> of the ioctl_* manpages?
> 
> > DESCRIPTION
> >        This  page  describes  the user-space notification mechanism pro‐
> >        vided by the Secure Computing (seccomp) facility.  As well as the
> >        use   of  the  SECCOMP_FILTER_FLAG_NEW_LISTENER  flag,  the  SEC‐
> >        COMP_RET_USER_NOTIF action value, and the SECCOMP_GET_NOTIF_SIZES
> >        operation  described  in  seccomp(2), this mechanism involves the
> >        use of a number of related ioctl(2) operations (described below).
> >
> >    Overview
> >        In conventional usage of a seccomp filter, the decision about how
> >        to  treat  a particular system call is made by the filter itself.
> >        The user-space notification mechanism allows the handling of  the
> >        system  call  to  instead  be handed off to a user-space process.
> >        The advantages of doing this are that, by contrast with the  sec‐
> >        comp  filter,  which  is  running on a virtual machine inside the
> >        kernel, the user-space process has access to information that  is
> >        unavailable to the seccomp filter and it can perform actions that
> >        can't be performed from the seccomp filter.
> >
> >        In the discussion that follows, the process  that  has  installed
> >        the  seccomp filter is referred to as the target, and the process
> 
> Technically, this definition of "target" is a bit inaccurate because:
> 
>  - seccomp filters are inherited
>  - seccomp filters apply to threads, not processes
>  - seccomp filters can be semi-remotely installed via TSYNC
> 
> (I assume that in manpages, we should try to go for the "a task is a
> thread and a thread group is a process" definition, right?)
> 
> Perhaps "the threads on which the seccomp filter is installed are
> referred to as the target", or something like that would be better?
> 
> >        that is notified by  the  user-space  notification  mechanism  is
> >        referred  to  as  the  supervisor.  An overview of the steps per‐
> >        formed by these two processes is as follows:
> >
> >        1. The target process establishes a seccomp filter in  the  usual
> >           manner, but with two differences:
> >
> >           · The seccomp(2) flags argument includes the flag SECCOMP_FIL‐
> >             TER_FLAG_NEW_LISTENER.  Consequently, the return  value   of
> >             the  (successful)  seccomp(2) call is a new "listening" file
> >             descriptor that can be used to receive notifications.
> >
> >           · In cases where it is appropriate, the seccomp filter returns
> >             the  action value SECCOMP_RET_USER_NOTIF.  This return value
> >             will trigger a notification event.
> >
> >        2. In order that the supervisor process can obtain  notifications
> >           using  the  listening  file  descriptor, (a duplicate of) that
> >           file descriptor must be passed from the target process to  the
> >           supervisor process.  One way in which this could be done is by
> >           passing the file descriptor over a UNIX domain socket  connec‐
> >           tion between the two processes (using the SCM_RIGHTS ancillary
> >           message type described in unix(7)).   Another  possibility  is
> >           that  the  supervisor  might  inherit  the file descriptor via
> >           fork(2).
> 
> With the caveat that if the supervisor inherits the file descriptor
> via fork(), that (more or less) implies that the supervisor is subject
> to the same filter (although it could bypass the filter using a helper
> thread that responds SECCOMP_USER_NOTIF_FLAG_CONTINUE, but I don't
> expect any clean software to do that).
> 
> >        3. The supervisor process will receive notification events on the
> >           listening  file  descriptor.   These  events  are  returned as
> >           structures of type seccomp_notif.  Because this structure  and
> >           its  size may evolve over kernel versions, the supervisor must
> >           first determine the size of  this  structure  using  the  sec‐
> >           comp(2)  SECCOMP_GET_NOTIF_SIZES  operation,  which  returns a
> >           structure of type seccomp_notif_sizes.  The  supervisor  allo‐
> >           cates a buffer of size seccomp_notif_sizes.seccomp_notif bytes
> >           to receive notification events.   In  addition,the  supervisor
> >           allocates  another  buffer  of  size  seccomp_notif_sizes.sec‐
> >           comp_notif_resp  bytes  for  the  response  (a   struct   sec‐
> >           comp_notif_resp  structure) that it will provide to the kernel
> >           (and thus the target process).
> >
> >        4. The target process then performs its workload, which  includes
> >           system  calls  that  will be controlled by the seccomp filter.
> >           Whenever one of these system calls causes the filter to return
> >           the  SECCOMP_RET_USER_NOTIF  action value, the kernel does not
> >           execute the system call;  instead,  execution  of  the  target
> >           process is temporarily blocked inside the kernel and a notifi‐
> 
> where "blocked" refers to the interruptible, restartable kind - if the
> child receives a signal with an SA_RESTART signal handler in the
> meantime, it'll leave the syscall, go through the signal handler, then
> restart the syscall again and send the same request to the supervisor
> again. so the supervisor may see duplicate syscalls.
> 
> What's really gross here is that signal(7) promises that some syscalls
> like epoll_wait(2) never restart, but seccomp doesn't know about that;
> if userspace installs a filter that uses SECCOMP_RET_USER_NOTIF for a
> non-restartable syscall, the result is that UAPI gets broken a little
> bit. Luckily normal users of seccomp probably won't use
> SECCOMP_RET_USER_NOTIF for restartable syscalls, but if someone does
> want to do that, we might have to add some "suppress syscall
> restarting" flag into the seccomp action value, or something like
> that... yuck.
> 
> >           cation event is generated on the listening file descriptor.
> >
> >        5. The supervisor process can now repeatedly monitor the  listen‐
> >           ing   file   descriptor  for  SECCOMP_RET_USER_NOTIF-triggered
> >           events.   To  do  this,   the   supervisor   uses   the   SEC‐
> >           COMP_IOCTL_NOTIF_RECV  ioctl(2)  operation to read information
> >           about a notification event; this  operation  blocks  until  an
> 
> (interruptably - but I guess that maybe doesn't have to be said
> explicitly here?)
> 
> >           event  is  available.
> 
> Maybe we should note here that you can use the multi-fd-polling APIs
> (select/poll/epoll) instead, and that if the notification goes away
> before you call SECCOMP_IOCTL_NOTIF_RECV, the ioctl will return
> -ENOENT instead of blocking, and therefore as long as nobody else
> reads from the same fd, you can assume that after the fd reports as
> readable, you can call SECCOMP_IOCTL_NOTIF_RECV once without blocking.
> 
> Exceeeeept that this part looks broken:
> 
>   if (mutex_lock_interruptible(&filter->notify_lock) < 0)
>     return EPOLLERR;
> 
> which I think means that we can have a race where a signal arrives
> while poll() is trying to add itself to the waitqueue of the seccomp
> fd, and then we'll get a spurious error condition reported on the fd.
> That's a kernel bug, I'd say.
> 
> > The  operation returns a seccomp_notif
> >           structure containing information about the system call that is
> >           being attempted by the target process.
> >
> >        6. The    seccomp_notif    structure   returned   by   the   SEC‐
> >           COMP_IOCTL_NOTIF_RECV operation includes the same  information
> >           (a seccomp_data structure) that was passed to the seccomp fil‐
> >           ter.  This information allows the supervisor to  discover  the
> >           system  call number and the arguments for the target process's
> >           system call.  In addition, the notification event contains the
> >           PID of the target process.
> 
> That's a PIDTYPE_PID, which the manpages call a "thread ID".
> 
> >           The  information  in  the notification can be used to discover
> >           the values of pointer arguments for the target process's  sys‐
> >           tem call.  (This is something that can't be done from within a
> >           seccomp filter.)  To do this (and  assuming  it  has  suitable
> >           permissions),   the   supervisor   opens   the   corresponding
> >           /proc/[pid]/mem file,
> 
> ... which means that here we might have to get into the weeds of how
> actually /proc has invisible directories for every TID, even though
> only the ones for PIDs are visible, and therefore you can just open
> /proc/[tid]/mem and it'll work fine?
> 
> > seeks to the memory location that corre‐
> >           sponds to one of the pointer arguments whose value is supplied
> >           in the notification event, and reads bytes from that location.
> >           (The supervisor must be careful to avoid a race condition that
> >           can occur when doing this; see the  description  of  the  SEC‐
> >           COMP_IOCTL_NOTIF_ID_VALID ioctl(2) operation below.)  In addi‐
> >           tion, the supervisor can access other system information  that
> >           is  visible  in  user space but which is not accessible from a
> >           seccomp filter.
> >
> >           ┌─────────────────────────────────────────────────────┐
> >           │FIXME                                                │
> >           ├─────────────────────────────────────────────────────┤
> >           │Suppose we are reading a pathname from /proc/PID/mem │
> >           │for  a system call such as mkdir(). The pathname can │
> >           │be an arbitrary length. How do we know how much (how │
> >           │many pages) to read from /proc/PID/mem?              │
> >           └─────────────────────────────────────────────────────┘
> 
> It can't be an arbitrary length. While pathnames *returned* from the
> kernel in some places can have different limits, strings supplied as
> path arguments *to* the kernel AFAIK always have an upper limit of
> PATH_MAX, else you get -ENAMETOOLONG. See getname_flags().
> 
> >        7. Having  obtained  information  as  per  the previous step, the
> >           supervisor may then choose to perform an action in response to
> >           the  target  process's  system call (which, as noted above, is
> >           not  executed  when  the  seccomp  filter  returns  the   SEC‐
> >           COMP_RET_USER_NOTIF action value).
> 
> (unless SECCOMP_USER_NOTIF_FLAG_CONTINUE is used)
> 
> >           One  example  use case here relates to containers.  The target
> >           process may be located inside a container where  it  does  not
> >           have sufficient capabilities to mount a filesystem in the con‐
> >           tainer's mount namespace.  However, the supervisor  may  be  a
> >           more  privileged  process that that does have sufficient capa‐
> 
> nit: s/that that/that/
> 
> >           bilities to perform the mount operation.
> >
> >        8. The supervisor then sends a response to the notification.  The
> >           information  in  this  response  is used by the kernel to con‐
> >           struct a return value for the target process's system call and
> >           provide a value that will be assigned to the errno variable of
> >           the target process.
> >
> >           The  response  is  sent  using  the   SECCOMP_IOCTL_NOTIF_RECV
> >           ioctl(2)   operation,   which  is  used  to  transmit  a  sec‐
> >           comp_notif_resp  structure  to  the  kernel.   This  structure
> >           includes  a  cookie  value that the supervisor obtained in the
> >           seccomp_notif    structure    returned     by     the     SEC‐
> >           COMP_IOCTL_NOTIF_RECV operation.  This cookie value allows the
> >           kernel to associate the response with the target process.
> 
> (unless if the target thread entered a signal handler or was killed in
> the meantime)
> 
> >        9. Once the notification has been sent, the system  call  in  the
> >           target  process  unblocks,  returning the information that was
> >           provided by the supervisor in the notification response.
> >
> >        As a variation on the last two steps, the supervisor can  send  a
> >        response  that tells the kernel that it should execute the target
> >        process's   system   call;   see   the   discussion    of    SEC‐
> >        COMP_USER_NOTIF_FLAG_CONTINUE, below.
> >
> >    ioctl(2) operations
> >        The following ioctl(2) operations are provided to support seccomp
> >        user-space notification.  For each of these operations, the first
> >        (file  descriptor)  argument  of  ioctl(2)  is the listening file
> >        descriptor returned by a call to seccomp(2) with the SECCOMP_FIL‐
> >        TER_FLAG_NEW_LISTENER flag.
> >
> >        SECCOMP_IOCTL_NOTIF_RECV
> >               This operation is used to obtain a user-space notification
> >               event.  If no such event is currently pending, the  opera‐
> >               tion  blocks  until  an  event occurs.
> 
> Not necessarily; for every time a process entered a signal handler or
> was killed while a notification was pending, a call to
> SECCOMP_IOCTL_NOTIF_RECV will return -ENOENT.
> 
> > The third ioctl(2)
> >               argument is a pointer to a structure of the following form
> >               which  contains  information about the event.  This struc‐
> >               ture must be zeroed out before the call.
> >
> >                   struct seccomp_notif {
> >                       __u64  id;              /* Cookie */
> >                       __u32  pid;             /* PID of target process */
> 
> (TID, not PID)
> 
> >                       __u32  flags;           /* Currently unused (0) */
> >                       struct seccomp_data data;   /* See seccomp(2) */
> >                   };
> >
> >               The fields in this structure are as follows:
> >
> >               id     This is a cookie for the notification.   Each  such
> >                      cookie  is  guaranteed  to be unique for the corre‐
> >                      sponding seccomp  filter.   In  other  words,  this
> >                      cookie  is  unique for each notification event from
> >                      the target process.
> 
> That sentence about "target process" looks wrong to me. The cookies
> are unique across notifications from the filter, but there can be
> multiple filters per thread, and multiple threads per filter.
> 
> > The cookie value has the  fol‐
> >                      lowing uses:
> >
> >                      · It     can     be     used    with    the    SEC‐
> >                        COMP_IOCTL_NOTIF_ID_VALID ioctl(2)  operation  to
> >                        verify that the target process is still alive.
> >
> >                      · When  returning  a  notification  response to the
> >                        kernel, the supervisor must  include  the  cookie
> >                        value in the seccomp_notif_resp structure that is
> >                        specified   as   the   argument   of   the   SEC‐
> >                        COMP_IOCTL_NOTIF_SEND operation.
> >
> >               pid    This  is  the  PID of the target process that trig‐
> >                      gered the notification event.
> >
> >                      ┌─────────────────────────────────────────────────────┐
> >                      │FIXME                                                │
> >                      ├─────────────────────────────────────────────────────┤
> >                      │This is a thread ID, rather than a PID, right?       │
> >                      └─────────────────────────────────────────────────────┘
> 
> Yeah.
> 
> >
> >               flags  This is a  bit  mask  of  flags  providing  further
> >                      information on the event.  In the current implemen‐
> >                      tation, this field is always zero.
> >
> >               data   This is a seccomp_data structure containing  infor‐
> >                      mation  about  the  system  call that triggered the
> >                      notification.  This is the same structure  that  is
> >                      passed  to  the seccomp filter.  See seccomp(2) for
> >                      details of this structure.
> >
> >               On success, this operation returns 0; on  failure,  -1  is
> >               returned,  and  errno  is set to indicate the cause of the
> >               error.  This operation can fail with the following errors:
> >
> >               EINVAL (since Linux 5.5)
> >                      The seccomp_notif structure that was passed to  the
> >                      call contained nonzero fields.
> >
> >               ENOENT The  target  process  was killed by a signal as the
> >                      notification information was being generated.
> 
> Not just killed, interruption with a signal handler has the same effect.
> 
> >        ┌─────────────────────────────────────────────────────┐
> >        │FIXME                                                │
> >        ├─────────────────────────────────────────────────────┤
> >        │From my experiments,  it  appears  that  if  a  SEC‐ │
> >        │COMP_IOCTL_NOTIF_RECV   is  done  after  the  target │
> >        │process terminates, then the ioctl()  simply  blocks │
> >        │(rather than returning an error to indicate that the │
> >        │target process no longer exists).                    │
> >        │                                                     │
> >        │I found that surprising, and it required  some  con‐ │
> >        │tortions  in the example program.  It was not possi‐ │
> >        │ble to code my SIGCHLD handler (which reaps the zom‐ │
> >        │bie  when  the  worker/target process terminates) to │
> >        │simply set a flag checked in the main  handleNotifi‐ │
> >        │cations()  loop,  since  this created an unavoidable │
> >        │race where the child might terminate  just  after  I │
> >        │had  checked  the  flag,  but before I blocked (for‐ │
> >        │ever!) in  the  SECCOMP_IOCTL_NOTIF_RECV  operation. │
> >        │Instead,  I had to code the signal handler to simply │
> >        │call _exit(2)  in  order  to  terminate  the  parent │
> >        │process (the supervisor).                            │
> >        │                                                     │
> >        │Is  this  expected  behavior?  It seems to me rather │
> >        │desirable that SECCOMP_IOCTL_NOTIF_RECV should  give │
> >        │an error if the target process has terminated.       │
> >        └─────────────────────────────────────────────────────┘
> 
> You could poll() the fd first. But yeah, it'd probably be a good idea
> to change that.
> 
> >        SECCOMP_IOCTL_NOTIF_ID_VALID
> [...]
> >               In the above scenario, the risk is that the supervisor may
> >               try to access the memory of a process other than the  tar‐
> >               get.   This  race  can be avoided by following the call to
> >               open with a SECCOMP_IOCTL_NOTIF_ID_VALID operation to ver‐
> >               ify  that  the  process that generated the notification is
> >               still alive.  (Note that  if  the  target  process  subse‐
> >               quently  terminates, its PID won't be reused because there
> 
> That's wrong, the PID can be reused, but the /proc/$pid directory is
> internally not associated with the numeric PID, but, conceptually
> speaking, with a specific incarnation of the PID, or something like
> that. (Actually, it is associated with the "struct pid", which is not
> reused, instead of the numeric PID.)
> 
> >               remains an open reference to the /proc[pid]/mem  file;  in
> >               this  case, a subsequent read(2) from the file will return
> >               0, indicating end of file.)
> >
> >               On success (i.e., the notification  ID  is  still  valid),
> >               this  operation  returns 0 On failure (i.e., the notifica‐
> 
> nit: s/returns 0/returns 0./
> 
> >               tion ID is no longer valid), -1 is returned, and errno  is
> >               set to ENOENT.
> >
> >        SECCOMP_IOCTL_NOTIF_SEND
> [...]
> >               Two kinds of response are possible:
> >
> >               · A response to the kernel telling it to execute the  tar‐
> >                 get  process's  system  call.   In  this case, the flags
> >                 field includes SECCOMP_USER_NOTIF_FLAG_CONTINUE and  the
> >                 error and val fields must be zero.
> >
> >                 This  kind  of response can be useful in cases where the
> >                 supervisor needs to do deeper analysis of  the  target's
> >                 system  call  than  is  possible  from  a seccomp filter
> >                 (e.g., examining the values of pointer arguments),  and,
> >                 having  verified that the system call is acceptable, the
> >                 supervisor wants to allow it to proceed.
> 
> "allow" sounds as if this is an access control thing, but this
> mechanism should usually not be used for access control (unless the
> "seccomp" syscall is blocked). Maybe reword as "having decided that
> the system call does not require emulation by the supervisor, the
> supervisor wants it to execute normally", or something like that?
> 
> [...]
> >               On success, this operation returns 0; on  failure,  -1  is
> >               returned,  and  errno  is set to indicate the cause of the
> >               error.  This operation can fail with the following errors:
> >
> >               EINPROGRESS
> >                      A response to this notification  has  already  been
> >                      sent.
> >
> >               EINVAL An invalid value was specified in the flags field.
> >
> >               EINVAL The       flags      field      contained      SEC‐
> >                      COMP_USER_NOTIF_FLAG_CONTINUE, and the error or val
> >                      field was not zero.
> >
> >               ENOENT The  blocked  system call in the target process has
> >                      been interrupted by a signal handler.
> 
> (you could also get this if a response has already been sent, instead
> of EINPROGRESS - the only difference is whether the target thread has
> picked up the response yet)
> 
> > NOTES
> >        The file descriptor returned when seccomp(2) is employed with the
> >        SECCOMP_FILTER_FLAG_NEW_LISTENER  flag  can  be  monitored  using
> >        poll(2), epoll(7), and select(2).  When a notification  is  pend‐
> >        ing,  these interfaces indicate that the file descriptor is read‐
> >        able.
> 
> We should probably also point out somewhere that, as
> include/uapi/linux/seccomp.h says:
> 
>  * Similar precautions should be applied when stacking SECCOMP_RET_USER_NOTIF
>  * or SECCOMP_RET_TRACE. For SECCOMP_RET_USER_NOTIF filters acting on the
>  * same syscall, the most recently added filter takes precedence. This means
>  * that the new SECCOMP_RET_USER_NOTIF filter can override any
>  * SECCOMP_IOCTL_NOTIF_SEND from earlier filters, essentially allowing all
>  * such filtered syscalls to be executed by sending the response
>  * SECCOMP_USER_NOTIF_FLAG_CONTINUE. Note that SECCOMP_RET_TRACE can equally
>  * be overriden by SECCOMP_USER_NOTIF_FLAG_CONTINUE.
> 
> In other words, from a security perspective, you must assume that the
> target process can bypass any SECCOMP_RET_USER_NOTIF (or
> SECCOMP_RET_TRACE) filters unless it is completely prohibited from
> calling seccomp(). This should also be noted over in the main
> seccomp(2) manpage, especially the SECCOMP_RET_TRACE part.

So I was actually wondering about this when I skimmed this and a while
ago but forgot about this again... Afaict, you can only ever load a
single filter with SECCOMP_FILTER_FLAG_NEW_LISTENER set. If there
already is a filter with the SECCOMP_FILTER_FLAG_NEW_LISTENER property
in the tasks filter hierarchy then the kernel will refuse to load a new
one?

static struct file *init_listener(struct seccomp_filter *filter)
{
	struct file *ret = ERR_PTR(-EBUSY);
	struct seccomp_filter *cur;

	for (cur = current->seccomp.filter; cur; cur = cur->prev) {
		if (cur->notif)
			goto out;
	}

shouldn't that be sufficient to guarantee that USER_NOTIF filters can't
override each other for the same task simply because there can only ever
be a single one?

> 
> 
> > EXAMPLES
> [...]
> >        This  program  can  used  to  demonstrate  various aspects of the
> 
> nit: "can be used to demonstrate", or alternatively just "demonstrates"
> 
> >        behavior of the seccomp user-space  notification  mechanism.   To
> >        help  aid  such demonstrations, the program logs various messages
> >        to show the operation of the target process (lines prefixed "T:")
> >        and the supervisor (indented lines prefixed "S:").
> [...]
> >    Program source
> [...]
> >        #define errExit(msg)    do { perror(msg); exit(EXIT_FAILURE); \
> >                                } while (0)
> 
> Don't we have err() for this?
> 
> >        /* Send the file descriptor 'fd' over the connected UNIX domain socket
> >           'sockfd'. Returns 0 on success, or -1 on error. */
> >
> >        static int
> >        sendfd(int sockfd, int fd)
> >        {
> >            struct msghdr msgh;
> >            struct iovec iov;
> >            int data;
> >            struct cmsghdr *cmsgp;
> >
> >            /* Allocate a char array of suitable size to hold the ancillary data.
> >               However, since this buffer is in reality a 'struct cmsghdr', use a
> >               union to ensure that it is suitable aligned. */
> 
> nit: suitably
> 
> >            union {
> >                char   buf[CMSG_SPACE(sizeof(int))];
> >                                /* Space large enough to hold an 'int' */
> >                struct cmsghdr align;
> >            } controlMsg;
> >
> >            /* The 'msg_name' field can be used to specify the address of the
> >               destination socket when sending a datagram. However, we do not
> >               need to use this field because 'sockfd' is a connected socket. */
> >
> >            msgh.msg_name = NULL;
> >            msgh.msg_namelen = 0;
> >
> >            /* On Linux, we must transmit at least one byte of real data in
> >               order to send ancillary data. We transmit an arbitrary integer
> >               whose value is ignored by recvfd(). */
> >
> >            msgh.msg_iov = &iov;
> >            msgh.msg_iovlen = 1;
> >            iov.iov_base = &data;
> >            iov.iov_len = sizeof(int);
> >            data = 12345;
> >
> >            /* Set 'msghdr' fields that describe ancillary data */
> >
> >            msgh.msg_control = controlMsg.buf;
> >            msgh.msg_controllen = sizeof(controlMsg.buf);
> >
> >            /* Set up ancillary data describing file descriptor to send */
> >
> >            cmsgp = CMSG_FIRSTHDR(&msgh);
> >            cmsgp->cmsg_level = SOL_SOCKET;
> >            cmsgp->cmsg_type = SCM_RIGHTS;
> >            cmsgp->cmsg_len = CMSG_LEN(sizeof(int));
> >            memcpy(CMSG_DATA(cmsgp), &fd, sizeof(int));
> >
> >            /* Send real plus ancillary data */
> >
> >            if (sendmsg(sockfd, &msgh, 0) == -1)
> >                return -1;
> >
> >            return 0;
> >        }
> 
> Instead of using unix domain sockets to send the fd to the parent, I
> think you could also use clone3() with flags==CLONE_FILES|SIGCHLD,
> dup2() the seccomp fd to an fd that was reserved in the parent, call
> unshare(CLONE_FILES) in the child after setting up the seccomp fd, and
> wake up the parent with something like pthread_cond_signal()? I'm not
> sure whether that'd look better or worse in the end though, so maybe
> just ignore this comment.

(If the target process exec's (rather fast) then VFORK can be useful.)

> 
> [...]
> >        /* Access the memory of the target process in order to discover the
> >           pathname that was given to mkdir() */
> >
> >        static void
> >        getTargetPathname(struct seccomp_notif *req, int notifyFd,
> >                          char *path, size_t len)
> >        {
> >            char procMemPath[PATH_MAX];
> >            snprintf(procMemPath, sizeof(procMemPath), "/proc/%d/mem", req->pid);
> >
> >            int procMemFd = open(procMemPath, O_RDONLY);
> 
> Should example code like this maybe use O_CLOEXEC unless the fd in
> question actually has to be inheritable? I know it doesn't actually
> matter here, but if this code was used in a multi-threaded context, it
> might.

Agreed, about the O_CLOEXEC part.

> 
> >            if (procMemFd == -1)
> >                errExit("Supervisor: open");
> >
> >            /* Check that the process whose info we are accessing is still alive.
> >               If the SECCOMP_IOCTL_NOTIF_ID_VALID operation (performed
> >               in checkNotificationIdIsValid()) succeeds, we know that the
> >               /proc/PID/mem file descriptor that we opened corresponds to the
> >               process for which we received a notification. If that process
> >               subsequently terminates, then read() on that file descriptor
> >               will return 0 (EOF). */
> >
> >            checkNotificationIdIsValid(notifyFd, req->id);
> >
> >            /* Seek to the location containing the pathname argument (i.e., the
> >               first argument) of the mkdir(2) call and read that pathname */
> >
> >            if (lseek(procMemFd, req->data.args[0], SEEK_SET) == -1)
> >                errExit("Supervisor: lseek");
> >
> >            ssize_t s = read(procMemFd, path, PATH_MAX);
> >            if (s == -1)
> >                errExit("read");
> 
> Why not pread() instead of lseek()+read()?

With multiple arguments to be read process_vm_readv() should also be
considered.



[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux