On Thu, 2020-06-11 at 22:50 +0200, Jiri Olsa wrote:
> hi,
> we're hitting a problem on s390 with BTF data alignment.
>
> When running simple test, we're getting this message from
> verifier and console:
>
> bpf_common.c:91: BROK: Failed verification: in-kernel BTF is
> malformed
> [ 41.545572] BPF:Total section length too long
>
>
> AFAICS it happens when .BTF section data size is not an even number
> ;-)
>
> DISCLAIMER I'm quite ignorant of s390x arch details, so most likely
> I'm
> totally wrong and perhaps missing something important and there's
> simple
> explanation.. but here's what got me here:
>
>
> ... so BTF data is placed in .BTF section via linker script:
>
> .BTF : AT(ADDR(.BTF) - LOAD_OFFSET)
> { \
> __start_BTF =
> .; \
> *(.BTF)
> \
> __stop_BTF =
> .; \
> }
>
>
> and the .BTF data size in btf_parse_vmlinux is computed as:
>
> btf->data_size = __stop_BTF - __start_BTF;
>
>
> this computation is compiled as:
>
> 00000000002aeb20 <btf_parse_vmlinux>:
> ...
> 2aeb8a: larl %r1,cda3ac <__start_BTF+0x2084a8> #
> loads r1 with end
> 2aeb90: larl %r2,ad1f04 <__start_BTF> #
> loads r2 with start
> 2aeb96: sgr %r1,%r2 #
> substract r1 - r2
>
>
> having following values for start/stop_BTF symbols:
>
> # nm ./vmlinux | grep __start_BTF
> 0000000000ad1f04 R __start_BTF
> # nm ./vmlinux | grep __stop_BTF
> 0000000000cda3ad R __stop_BTF
>
> -> the BTF data size is 0x2084a9
>
>
> but as you can see the instruction that loads the 'end' symbol:
>
> larl %r1,cda3ac <__start_BTF+0x2084a8>
>
>
> is loading '__start_BTF + 0x2084a8', which is '__stop_BTF - 1'
>
>
> From spec it seems that larl instruction's argument must be even
> number ([1] page 7-214):
>
> 2. For LOAD RELATIVE LONG, the second oper-and must
> be aligned
> on an integral boundary cor-responding to the operand’s
> size.
>
>
> I also found an older bug complaining about this issue [2]:
>
> ...
> larl instruction can only load even values - instructions on
> s390 are 2-byte
> aligned and the instruction encodes offset to the target in
> 2-byte units.
> ...
> The GNU BFD linker for s390 doesn't bother to check if
> relocations fit or are
> properly aligned.
> ...
>
>
> I tried to fix that aligning the end to even number, but then
> btf_check_sec_info logic needs to be adjusted as well, and
> probably other places as well.. so I decided to share this
> first.. because it all seems wrong ;-)
>
> thoughts? thanks,
> jirka
>
>
> [1] http://publibfi.boulder.ibm.com/epubs/pdf/dz9zr008.pdf
> [2] https://sourceware.org/bugzilla/show_bug.cgi?id=18960
>
Hi Jiri,
Actually I recently ran into it myself on Debian, and I believe your
analysis is correct :-) The only thing to add to it is that the
compiler emits the correct instruction (if you look at the .o file),
it's linker that messes things up.
The linker bug in question is [1].
I opened [2] to Debian folks, and I believe that other important
distros (RH, SUSE, Ubuntu) have this fixed already.
Which distro are you using?
Best regards,
Ilya
[1]
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=e6213e09ed0e
[2] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=961736
