On Wed, Mar 18, 2020 at 3:03 AM Jakub Sitnicki <jakub@xxxxxxxxxxxxxx> wrote:
>
> On Wed, Mar 18, 2020 at 01:46 AM CET, Joe Stringer wrote:
> > On Mon, Mar 16, 2020 at 11:27 PM Martin KaFai Lau <kafai@xxxxxx> wrote:
> >>
> >> On Mon, Mar 16, 2020 at 08:06:38PM -0700, Joe Stringer wrote:
> >> > On Mon, Mar 16, 2020 at 3:58 PM Martin KaFai Lau <kafai@xxxxxx> wrote:
> >> > >
> >> > > On Thu, Mar 12, 2020 at 04:36:44PM -0700, Joe Stringer wrote:
> >> > > > Add support for TPROXY via a new bpf helper, bpf_sk_assign().
> >> > > >
> >> > > > This helper requires the BPF program to discover the socket via a call
> >> > > > to bpf_sk*_lookup_*(), then pass this socket to the new helper. The
> >> > > > helper takes its own reference to the socket in addition to any existing
> >> > > > reference that may or may not currently be obtained for the duration of
> >> > > > BPF processing. For the destination socket to receive the traffic, the
> >> > > > traffic must be routed towards that socket via local route, the socket
> >> > > I also missed where is the local route check in the patch.
> >> > > Is it implied by a sk can be found in bpf_sk*_lookup_*()?
> >> >
> >> > This is a requirement for traffic redirection, it's not enforced by
> >> > the patch. If the operator does not configure routing for the relevant
> >> > traffic to ensure that the traffic is delivered locally, then after
> >> > the eBPF program terminates, it will pass up through ip_rcv() and
> >> > friends and be subject to the whims of the routing table. (or
> >> > alternatively if the BPF program redirects somewhere else then this
> >> > reference will be dropped).
> >> >
> >> > Maybe there's a path to simplifying this configuration path in future
> >> > to loosen this requirement, but for now I've kept the series as
> >> > minimal as possible on that front.
> >> >
> >> > > [ ... ]
> >> > >
> >> > > > diff --git a/net/core/filter.c b/net/core/filter.c
> >> > > > index cd0a532db4e7..bae0874289d8 100644
> >> > > > --- a/net/core/filter.c
> >> > > > +++ b/net/core/filter.c
> >> > > > @@ -5846,6 +5846,32 @@ static const struct bpf_func_proto bpf_tcp_gen_syncookie_proto = {
> >> > > > .arg5_type = ARG_CONST_SIZE,
> >> > > > };
> >> > > >
> >> > > > +BPF_CALL_3(bpf_sk_assign, struct sk_buff *, skb, struct sock *, sk, u64, flags)
> >> > > > +{
> >> > > > + if (flags != 0)
> >> > > > + return -EINVAL;
> >> > > > + if (!skb_at_tc_ingress(skb))
> >> > > > + return -EOPNOTSUPP;
> >> > > > + if (unlikely(!refcount_inc_not_zero(&sk->sk_refcnt)))
> >> > > > + return -ENOENT;
> >> > > > +
> >> > > > + skb_orphan(skb);
> >> > > > + skb->sk = sk;
> >> > > sk is from the bpf_sk*_lookup_*() which does not consider
> >> > > the bpf_prog installed in SO_ATTACH_REUSEPORT_EBPF.
> >> > > However, the use-case is currently limited to sk inspection.
> >> > >
> >> > > It now supports selecting a particular sk to receive traffic.
> >> > > Any plan in supporting that?
> >> >
> >> > I think this is a general bpf_sk*_lookup_*() question, previous
> >> > discussion[0] settled on avoiding that complexity before a use case
> >> > arises, for both TC and XDP versions of these helpers; I still don't
> >> > have a specific use case in mind for such functionality. If we were to
> >> > do it, I would presume that the socket lookup caller would need to
> >> > pass a dedicated flag (supported at TC and likely not at XDP) to
> >> > communicate that SO_ATTACH_REUSEPORT_EBPF progs should be respected
> >> > and used to select the reuseport socket.
> >> It is more about the expectation on the existing SO_ATTACH_REUSEPORT_EBPF
> >> usecase. It has been fine because SO_ATTACH_REUSEPORT_EBPF's bpf prog
> >> will still be run later (e.g. from tcp_v4_rcv) to decide which sk to
> >> recieve the skb.
> >>
> >> If the bpf@tc assigns a TCP_LISTEN sk in bpf_sk_assign(),
> >> will the SO_ATTACH_REUSEPORT_EBPF's bpf still be run later
> >> to make the final sk decision?
> >
> > I don't believe so, no:
> >
> > ip_local_deliver()
> > -> ...
> > -> ip_protocol_deliver_rcu()
> > -> tcp_v4_rcv()
> > -> __inet_lookup_skb()
> > -> skb_steal_sock(skb)
> >
> > But this will only affect you if you are running both the bpf@tc
> > program with sk_assign() and the reuseport BPF sock programs at the
> > same time. This is why I link it back to the bpf_sk*_lookup_*()
> > functions: If the socket lookup in the initial step respects reuseport
> > BPF prog logic and returns the socket using the same logic, then the
> > packet will be directed to the socket you expect. Just like how
> > non-BPF reuseport would work with this series today.
>
> I'm a bit lost in argumentation. The cover letter says that the goal is
> to support TPROXY use cases from BPF TC. TPROXY, however, supports
> reuseport load-balancing, which is essential to scaling out your
> receiver [0].
Thanks for the link, that helps set the background.
> I assume that in Cilium use case, single socket / single core is
> sufficient to handle traffic steered with this new mechanism.
>
> Also, socket lookup from XDP / BPF TC _without_ reuseport sounds
> okay-ish because you're likely after information that a socket (group)
> is attached to some local address / port.
>
> However, when you go one step further and assign the socket to skb
> without running reuseport logic, that is breaking socket load-balancing
> for applications.
>
> That is to say that I'm with Lorenz on this one. Sockets that belong to
> reuseport group should not be a valid target for assignment until socket
> lookup from BPF honors reuseport.
I was considering SO_REUSEPORT socket option separately from the BPF
reuseport programs, and thinking that from that perspective if you
weren't at the point of loading the BPF programs to help steer the
traffic to reuseport sockets, then you could still make use of this
helper. I think you're conversely assuming BPF reuseport program will
be configured and that's the default, so if we allow this at all then
we'll break that use case.
I still disagree, but in the interests of unblocking the basic cases
here I can roll in this restriction; it's always easier to loosen
things up in future than to make them more restrictive later.
