FEAT_SPEv1p2 (optional from Armv8.6) adds a discard mode that allows all
SPE data to be discarded rather than written to memory. Add a format
bit for this mode.
If the mode isn't supported, the format bit isn't published and attempts
to use it will result in -EOPNOTSUPP. Allocating an aux buffer is still
allowed even though it won't be written to so that old tools continue to
work, but updated tools can choose to skip this step.
Reviewed-by: Yeoreum Yun <yeoreum.yun@xxxxxxx>
Signed-off-by: James Clark <james.clark@xxxxxxxxxx>
---
drivers/perf/arm_spe_pmu.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/drivers/perf/arm_spe_pmu.c b/drivers/perf/arm_spe_pmu.c
index fd5b78732603..9aaf3f98e6f5 100644
--- a/drivers/perf/arm_spe_pmu.c
+++ b/drivers/perf/arm_spe_pmu.c
@@ -193,6 +193,9 @@ static const struct attribute_group arm_spe_pmu_cap_group = {
#define ATTR_CFG_FLD_store_filter_CFG config /* PMSFCR_EL1.ST */
#define ATTR_CFG_FLD_store_filter_LO 34
#define ATTR_CFG_FLD_store_filter_HI 34
+#define ATTR_CFG_FLD_discard_CFG config /* PMBLIMITR_EL1.FM = DISCARD */
+#define ATTR_CFG_FLD_discard_LO 35
+#define ATTR_CFG_FLD_discard_HI 35
#define ATTR_CFG_FLD_event_filter_CFG config1 /* PMSEVFR_EL1 */
#define ATTR_CFG_FLD_event_filter_LO 0
@@ -216,6 +219,7 @@ GEN_PMU_FORMAT_ATTR(store_filter);
GEN_PMU_FORMAT_ATTR(event_filter);
GEN_PMU_FORMAT_ATTR(inv_event_filter);
GEN_PMU_FORMAT_ATTR(min_latency);
+GEN_PMU_FORMAT_ATTR(discard);
static struct attribute *arm_spe_pmu_formats_attr[] = {
&format_attr_ts_enable.attr,
@@ -228,9 +232,15 @@ static struct attribute *arm_spe_pmu_formats_attr[] = {
&format_attr_event_filter.attr,
&format_attr_inv_event_filter.attr,
&format_attr_min_latency.attr,
+ &format_attr_discard.attr,
NULL,
};
+static bool discard_unsupported(struct arm_spe_pmu *spe_pmu)
+{
+ return spe_pmu->pmsver < ID_AA64DFR0_EL1_PMSVer_V1P2;
+}
+
static umode_t arm_spe_pmu_format_attr_is_visible(struct kobject *kobj,
struct attribute *attr,
int unused)
@@ -238,6 +248,9 @@ static umode_t arm_spe_pmu_format_attr_is_visible(struct kobject *kobj,
struct device *dev = kobj_to_dev(kobj);
struct arm_spe_pmu *spe_pmu = dev_get_drvdata(dev);
+ if (attr == &format_attr_discard.attr && discard_unsupported(spe_pmu))
+ return 0;
+
if (attr == &format_attr_inv_event_filter.attr && !(spe_pmu->features & SPE_PMU_FEAT_INV_FILT_EVT))
return 0;
@@ -502,6 +515,12 @@ static void arm_spe_perf_aux_output_begin(struct perf_output_handle *handle,
u64 base, limit;
struct arm_spe_pmu_buf *buf;
+ if (ATTR_CFG_GET_FLD(&event->attr, discard)) {
+ limit = FIELD_PREP(PMBLIMITR_EL1_FM, PMBLIMITR_EL1_FM_DISCARD);
+ limit |= PMBLIMITR_EL1_E;
+ goto out_write_limit;
+ }
+
/* Start a new aux session */
buf = perf_aux_output_begin(handle, event);
if (!buf) {
@@ -743,6 +762,10 @@ static int arm_spe_pmu_event_init(struct perf_event *event)
!(spe_pmu->features & SPE_PMU_FEAT_FILT_LAT))
return -EOPNOTSUPP;
+ if (ATTR_CFG_GET_FLD(&event->attr, discard) &&
+ discard_unsupported(spe_pmu))
+ return -EOPNOTSUPP;
+
set_spe_event_has_cx(event);
reg = arm_spe_event_to_pmscr(event);
if (reg & (PMSCR_EL1_PA | PMSCR_EL1_PCT))
--
2.34.1
