RE: [PATCH v3 net 2/3] net: enetc: fix the issues of XDP_REDIRECT feature

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
> Sent: 2024年10月9日 19:35
> To: Wei Fang <wei.fang@xxxxxxx>
> Cc: davem@xxxxxxxxxxxxx; edumazet@xxxxxxxxxx; kuba@xxxxxxxxxx;
> pabeni@xxxxxxxxxx; Claudiu Manoil <claudiu.manoil@xxxxxxx>;
> ast@xxxxxxxxxx; daniel@xxxxxxxxxxxxx; hawk@xxxxxxxxxx;
> john.fastabend@xxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> netdev@xxxxxxxxxxxxxxx; bpf@xxxxxxxxxxxxxxx; stable@xxxxxxxxxxxxxxx;
> imx@xxxxxxxxxxxxxxx; rkannoth@xxxxxxxxxxx; maciej.fijalkowski@xxxxxxxxx;
> sbhatta@xxxxxxxxxxx
> Subject: Re: [PATCH v3 net 2/3] net: enetc: fix the issues of XDP_REDIRECT
> feature
> 
> Commit title still mentions only XDP_REDIRECT, whereas implementation also
> touches XDP_TX (and only makes a very minor mention of it).
> 
> Wouldn't it be better to have "net: enetc: block concurrent XDP transmissions
> during ring reconfiguration" for a commit title?
> 
> On Wed, Oct 09, 2024 at 05:03:26PM +0800, Wei Fang wrote:
> > When testing the XDP_REDIRECT function on the LS1028A platform, we
> > found a very reproducible issue that the Tx frames can no longer be
> > sent out even if XDP_REDIRECT is turned off. Specifically, if there is
> > a lot of traffic on Rx direction, when XDP_REDIRECT is turned on, the
> > console may display some warnings like "timeout for tx ring #6 clear",
> > and all redirected frames will be dropped, the detaild log
> 
> detailed
> 
> > is as follows.
> >
> > root@ls1028ardb:~# ./xdp-bench redirect eno0 eno2 Redirecting from
> > eno0 (ifindex 3; driver fsl_enetc) to eno2 (ifindex 4; driver
> > fsl_enetc) [203.849809] fsl_enetc 0000:00:00.2 eno2: timeout for tx
> > ring #5 clear [204.006051] fsl_enetc 0000:00:00.2 eno2: timeout for tx
> > ring #6 clear [204.161944] fsl_enetc 0000:00:00.2 eno2: timeout for tx
> > ring #7 clear
> > eno0->eno2     1420505 rx/s       1420590 err,drop/s      0 xmit/s
> >   xmit eno0->eno2    0 xmit/s     1420590 drop/s     0 drv_err/s
> 15.71 bulk-avg
> > eno0->eno2     1420484 rx/s       1420485 err,drop/s      0 xmit/s
> >   xmit eno0->eno2    0 xmit/s     1420485 drop/s     0 drv_err/s
> 15.71 bulk-avg
> >
> > By analyzing the XDP_REDIRECT implementation of enetc driver, we found
> > two problems. First, enetc driver will reconfigure Tx and Rx BD rings
> > when a bpf program is installed or uninstalled, but there is no
> > mechanisms to block the redirected frames when enetc driver
> > reconfigures BD rings. So introduce ENETC_TX_DOWN flag to
> 
> (.. driver reconfigures BD rings.) Similarly, XDP_TX verdicts on received frames
> can also lead to frames being enqueued in the TX rings.
> Because XDP ignores the state set by the netif_tx_wake_queue() API, we also
> have to introduce the ENETC_TX_DOWN flag to suppress transmission of XDP
> frames.
> 
> > prevent the redirected frames to be attached to Tx BD rings. This is
> > not only used to block XDP_REDIRECT frames, but also to block XDP_TX
> > frames.
> >
> > Second, Tx BD rings are disabled first in enetc_stop() and then wait
> > for empty. This operation is not safe while the Tx BD ring
> 
> the driver waits for them to become empty.
> 
> > is actively transmitting frames, and will cause the ring to not be
> > empty and hardware exception. As described in the block guide of
> > LS1028A NETC, software should only disable an active ring after all
> > pending ring entries have been consumed (i.e. when PI = CI).
> > Disabling a transmit ring that is actively processing BDs risks a
> > HW-SW race hazard whereby a hardware resource becomes assigned to work
> > on one or more ring entries only to have those entries be removed due
> > to the ring becoming disabled. So the correct behavior is that the
> > software stops putting frames on the Tx BD rings (this is what
> > ENETC_TX_DOWN does), then waits for the Tx BD rings to be empty, and
> > finally disables the Tx BD rings.
> 
> It feels like this separate part (refactoring of enetc_start() and
> enetc_stop() operation ordering) should be its own patch? It is logically
> different than the introduction and checking of the ENETC_TX_DOWN
> condition.

Okay, I will separate this patch into two patches, one is for ENETC_TX_DOWN,
the other is for disabling Tx BDRs after the rings are empty.
Thanks.




[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux