Currently we index symbols from the percpu ELF section, and when
processing DWARF variables for inclusion, we check whether the variable
matches an existing symbol. The matched symbol is used for three
purposes:
1. When no symbol of the same address is found, the variable is skipped.
This can occur because the symbol name was an invalid BTF
identifier, and so it did not get indexed. Or more commonly, it can
be because the variable is not stored in the per-cpu section, and
thus was not indexed.
2. If the symbol offset is 0, then we compare the DWARF variable's name
against the symbol name to filter out "special" DWARF variables.
3. We use the symbol size in the DATASEC entry for the variable.
For 1, we don't need the symbol table: we can simply check the DWARF
variable name directly, and we can use the variable address to determine
the ELF section it is contained in. For 3, we also don't need the symbol
table: we can use the variable's size information from DWARF. Issue 2 is
more complicated, but thanks to the addition of the "artificial" and
"top_level" flags, many of the "special" DWARF variables can be directly
filtered out, and the few remaining problematic variables can be
filtered by name from a kernel-specific list of patterns.
This allows the symbol table index to be removed. The benefit of
removing this index is twofold. First, handling variable addresses is
simplified, since we don't need to know whether the file is ET_REL.
Second, this will make it easier to output variables that aren't just
percpu, since we won't need to index variables from all ELF sections.
Signed-off-by: Stephen Brennan <stephen.s.brennan@xxxxxxxxxx>
Reviewed-by: Alan Maguire <alan.maguire@xxxxxxxxxx>
Acked-by: Jiri Olsa <jolsa@xxxxxxxxxx>
---
btf_encoder.c | 253 ++++++++++++++++++++------------------------------
1 file changed, 99 insertions(+), 154 deletions(-)
diff --git a/btf_encoder.c b/btf_encoder.c
index 652a945..61e9ece 100644
--- a/btf_encoder.c
+++ b/btf_encoder.c
@@ -93,16 +93,11 @@ struct elf_function {
struct btf_encoder_func_state state;
};
-struct var_info {
- uint64_t addr;
- const char *name;
- uint32_t sz;
-};
-
struct elf_secinfo {
uint64_t addr;
const char *name;
uint64_t sz;
+ uint32_t type;
};
/*
@@ -125,17 +120,11 @@ struct btf_encoder {
gen_floats,
skip_encoding_decl_tag,
tag_kfuncs,
- is_rel,
gen_distilled_base;
uint32_t array_index_id;
struct elf_secinfo *secinfo;
size_t seccnt;
- struct {
- struct var_info *vars;
- int var_cnt;
- int allocated;
- uint32_t shndx;
- } percpu;
+ size_t percpu_shndx;
int encode_vars;
struct {
struct elf_function *entries;
@@ -2098,111 +2087,18 @@ int btf_encoder__encode(struct btf_encoder *encoder)
return err;
}
-static int percpu_var_cmp(const void *_a, const void *_b)
-{
- const struct var_info *a = _a;
- const struct var_info *b = _b;
-
- if (a->addr == b->addr)
- return 0;
- return a->addr < b->addr ? -1 : 1;
-}
-
-static bool btf_encoder__percpu_var_exists(struct btf_encoder *encoder, uint64_t addr, uint32_t *sz, const char **name)
-{
- struct var_info key = { .addr = addr };
- const struct var_info *p = bsearch(&key, encoder->percpu.vars, encoder->percpu.var_cnt,
- sizeof(encoder->percpu.vars[0]), percpu_var_cmp);
- if (!p)
- return false;
-
- *sz = p->sz;
- *name = p->name;
- return true;
-}
-
-static int btf_encoder__collect_percpu_var(struct btf_encoder *encoder, GElf_Sym *sym, size_t sym_sec_idx)
-{
- const char *sym_name;
- uint64_t addr;
- uint32_t size;
-
- /* compare a symbol's shndx to determine if it's a percpu variable */
- if (sym_sec_idx != encoder->percpu.shndx)
- return 0;
- if (elf_sym__type(sym) != STT_OBJECT)
- return 0;
-
- addr = elf_sym__value(sym);
- size = elf_sym__size(sym);
- if (!size)
- return 0; /* ignore zero-sized symbols */
-
- sym_name = elf_sym__name(sym, encoder->symtab);
- if (!btf_name_valid(sym_name)) {
- dump_invalid_symbol("Found symbol of invalid name when encoding btf",
- sym_name, encoder->verbose, encoder->force);
- if (encoder->force)
- return 0;
- return -1;
- }
-
- if (encoder->verbose)
- printf("Found per-CPU symbol '%s' at address 0x%" PRIx64 "\n", sym_name, addr);
-
- /* Make sure addr is section-relative. For kernel modules (which are
- * ET_REL files) this is already the case. For vmlinux (which is an
- * ET_EXEC file) we need to subtract the section address.
- */
- if (!encoder->is_rel)
- addr -= encoder->secinfo[encoder->percpu.shndx].addr;
-
- if (encoder->percpu.var_cnt == encoder->percpu.allocated) {
- struct var_info *new;
-
- new = reallocarray_grow(encoder->percpu.vars,
- &encoder->percpu.allocated,
- sizeof(*encoder->percpu.vars));
- if (!new) {
- fprintf(stderr, "Failed to allocate memory for variables\n");
- return -1;
- }
- encoder->percpu.vars = new;
- }
- encoder->percpu.vars[encoder->percpu.var_cnt].addr = addr;
- encoder->percpu.vars[encoder->percpu.var_cnt].sz = size;
- encoder->percpu.vars[encoder->percpu.var_cnt].name = sym_name;
- encoder->percpu.var_cnt++;
-
- return 0;
-}
-
-static int btf_encoder__collect_symbols(struct btf_encoder *encoder, bool collect_percpu_vars)
+static int btf_encoder__collect_symbols(struct btf_encoder *encoder)
{
- Elf32_Word sym_sec_idx;
+ uint32_t sym_sec_idx;
uint32_t core_id;
GElf_Sym sym;
- /* cache variables' addresses, preparing for searching in symtab. */
- encoder->percpu.var_cnt = 0;
-
- /* search within symtab for percpu variables */
elf_symtab__for_each_symbol_index(encoder->symtab, core_id, sym, sym_sec_idx) {
- if (collect_percpu_vars && btf_encoder__collect_percpu_var(encoder, &sym, sym_sec_idx))
- return -1;
if (btf_encoder__collect_function(encoder, &sym))
return -1;
}
- if (collect_percpu_vars) {
- if (encoder->percpu.var_cnt)
- qsort(encoder->percpu.vars, encoder->percpu.var_cnt, sizeof(encoder->percpu.vars[0]), percpu_var_cmp);
-
- if (encoder->verbose)
- printf("Found %d per-CPU variables!\n", encoder->percpu.var_cnt);
- }
-
if (encoder->functions.cnt) {
qsort(encoder->functions.entries, encoder->functions.cnt, sizeof(encoder->functions.entries[0]),
functions_cmp);
@@ -2224,15 +2120,57 @@ static bool ftype__has_arg_names(const struct ftype *ftype)
return true;
}
+static size_t get_elf_section(struct btf_encoder *encoder, uint64_t addr)
+{
+ /* Start at index 1 to ignore initial SHT_NULL section */
+ for (size_t i = 1; i < encoder->seccnt; i++) {
+ /* Variables are only present in PROGBITS or NOBITS (.bss) */
+ if (encoder->secinfo[i].type == SHT_PROGBITS ||
+ encoder->secinfo[i].type == SHT_NOBITS)
+ continue;
+
+ if (encoder->secinfo[i].addr <= addr &&
+ (addr - encoder->secinfo[i].addr) < encoder->secinfo[i].sz)
+ return i;
+ }
+ return 0;
+}
+
+/*
+ * Filter out variables / symbol names with common prefixes and no useful
+ * values. Prefixes should be added sparingly, and it should be objectively
+ * obvious that they are not useful.
+ */
+static bool filter_variable_name(const char *name)
+{
+ static const struct { char *s; size_t len; } skip[] = {
+ #define X(str) {str, sizeof(str) - 1}
+ X("__UNIQUE_ID"),
+ X("__tpstrtab_"),
+ X("__exitcall_"),
+ X("__func_stack_frame_non_standard_")
+ #undef X
+ };
+ int i;
+
+ if (*name != '_')
+ return false;
+
+ for (i = 0; i < ARRAY_SIZE(skip); i++) {
+ if (strncmp(name, skip[i].s, skip[i].len) == 0)
+ return true;
+ }
+ return false;
+}
+
static int btf_encoder__encode_cu_variables(struct btf_encoder *encoder)
{
struct cu *cu = encoder->cu;
uint32_t core_id;
struct tag *pos;
int err = -1;
- struct elf_secinfo *pcpu_scn = &encoder->secinfo[encoder->percpu.shndx];
- if (encoder->percpu.shndx == 0 || !encoder->symtab)
+ if (encoder->percpu_shndx == 0 || !encoder->symtab)
return 0;
if (encoder->verbose)
@@ -2240,59 +2178,69 @@ static int btf_encoder__encode_cu_variables(struct btf_encoder *encoder)
cu__for_each_variable(cu, core_id, pos) {
struct variable *var = tag__variable(pos);
- uint32_t size, type, linkage;
- const char *name, *dwarf_name;
+ uint32_t type, linkage;
+ const char *name;
struct llvm_annotation *annot;
const struct tag *tag;
+ size_t shndx, size;
uint64_t addr;
int id;
+ /* Skip incomplete (non-defining) declarations */
if (var->declaration && !var->spec)
continue;
- /* percpu variables are allocated in global space */
- if (variable__scope(var) != VSCOPE_GLOBAL && !var->spec)
+ /*
+ * top_level: indicates that the variable is declared at the top
+ * level of the CU, and thus it is globally scoped.
+ * artificial: indicates that the variable is a compiler-generated
+ * "fake" variable that doesn't appear in the source.
+ * scope: set by pahole to indicate the type of storage the
+ * variable has. GLOBAL indicates it is stored in static
+ * memory (as opposed to a stack variable or register)
+ *
+ * Some variables are "top_level" but not GLOBAL:
+ * e.g. current_stack_pointer, which is a register variable,
+ * despite having global CU-declarations. We don't want that,
+ * since no code could actually find this variable.
+ * Some variables are GLOBAL but not top_level:
+ * e.g. function static variables
+ */
+ if (!var->top_level || var->artificial || var->scope != VSCOPE_GLOBAL)
continue;
/* addr has to be recorded before we follow spec */
addr = var->ip.addr;
- dwarf_name = variable__name(var);
- /* Make sure addr is section-relative. DWARF, unlike ELF,
- * always contains virtual symbol addresses, so subtract
- * the section address unconditionally.
- */
- if (addr < pcpu_scn->addr || addr >= pcpu_scn->addr + pcpu_scn->sz)
+ /* Get the ELF section info for the variable */
+ shndx = get_elf_section(encoder, addr);
+ if (shndx != encoder->percpu_shndx)
continue;
- addr -= pcpu_scn->addr;
- if (!btf_encoder__percpu_var_exists(encoder, addr, &size, &name))
- continue; /* not a per-CPU variable */
+ /* Convert addr to section relative */
+ addr -= encoder->secinfo[shndx].addr;
- /* A lot of "special" DWARF variables (e.g, __UNIQUE_ID___xxx)
- * have addr == 0, which is the same as, say, valid
- * fixed_percpu_data per-CPU variable. To distinguish between
- * them, additionally compare DWARF and ELF symbol names. If
- * DWARF doesn't provide proper name, pessimistically assume
- * bad variable.
- *
- * Examples of such special variables are:
- *
- * 1. __ADDRESSABLE(sym), which are forcely emitted as symbols.
- * 2. __UNIQUE_ID(prefix), which are introduced to generate unique ids.
- * 3. __exitcall(fn), functions which are labeled as exit calls.
- *
- * This is relevant only for vmlinux image, as for kernel
- * modules per-CPU data section has non-zero offset so all
- * per-CPU symbols have non-zero values.
- */
- if (var->ip.addr == 0) {
- if (!dwarf_name || strcmp(dwarf_name, name))
+ /* DWARF specification reference should be followed, because
+ * information like the name & type may not be present on var */
+ if (var->spec)
+ var = var->spec;
+
+ name = variable__name(var);
+ if (!name)
+ continue;
+
+ /* Check for invalid BTF names */
+ if (!btf_name_valid(name)) {
+ dump_invalid_symbol("Found invalid variable name when encoding btf",
+ name, encoder->verbose, encoder->force);
+ if (encoder->force)
continue;
+ else
+ return -1;
}
- if (var->spec)
- var = var->spec;
+ if (filter_variable_name(name))
+ continue;
if (var->ip.tag.type == 0) {
fprintf(stderr, "error: found variable '%s' in CU '%s' that has void type\n",
@@ -2304,9 +2252,10 @@ static int btf_encoder__encode_cu_variables(struct btf_encoder *encoder)
}
tag = cu__type(cu, var->ip.tag.type);
- if (tag__size(tag, cu) == 0) {
+ size = tag__size(tag, cu);
+ if (size == 0) {
if (encoder->verbose)
- fprintf(stderr, "Ignoring zero-sized per-CPU variable '%s'...\n", dwarf_name ?: "<missing name>");
+ fprintf(stderr, "Ignoring zero-sized per-CPU variable '%s'...\n", name);
continue;
}
@@ -2388,8 +2337,6 @@ struct btf_encoder *btf_encoder__new(struct cu *cu, const char *detached_filenam
goto out_delete;
}
- encoder->is_rel = ehdr.e_type == ET_REL;
-
switch (ehdr.e_ident[EI_DATA]) {
case ELFDATA2LSB:
btf__set_endianness(encoder->btf, BTF_LITTLE_ENDIAN);
@@ -2430,15 +2377,16 @@ struct btf_encoder *btf_encoder__new(struct cu *cu, const char *detached_filenam
encoder->secinfo[shndx].addr = shdr.sh_addr;
encoder->secinfo[shndx].sz = shdr.sh_size;
encoder->secinfo[shndx].name = secname;
+ encoder->secinfo[shndx].type = shdr.sh_type;
if (strcmp(secname, PERCPU_SECTION) == 0)
- encoder->percpu.shndx = shndx;
+ encoder->percpu_shndx = shndx;
}
- if (!encoder->percpu.shndx && encoder->verbose)
+ if (!encoder->percpu_shndx && encoder->verbose)
printf("%s: '%s' doesn't have '%s' section\n", __func__, cu->filename, PERCPU_SECTION);
- if (btf_encoder__collect_symbols(encoder, encoder->encode_vars & BTF_VAR_PERCPU))
+ if (btf_encoder__collect_symbols(encoder))
goto out_delete;
if (encoder->verbose)
@@ -2480,9 +2428,6 @@ void btf_encoder__delete(struct btf_encoder *encoder)
encoder->functions.allocated = encoder->functions.cnt = 0;
free(encoder->functions.entries);
encoder->functions.entries = NULL;
- encoder->percpu.allocated = encoder->percpu.var_cnt = 0;
- free(encoder->percpu.vars);
- encoder->percpu.vars = NULL;
free(encoder);
}
--
2.43.5
