Hi Serge,
Thank you for taking the time to review the patches.
On Tue, Sep 10, 2024 at 11:37 AM Serge Semin <fancer.lancer@xxxxxxxxx> wrote:
>
> Hi Jitendra
>
> On Tue, Sep 03, 2024 at 10:48:11PM -0700, jitendra.vegiraju@xxxxxxxxxxxx wrote:
> > From: Jitendra Vegiraju <jitendra.vegiraju@xxxxxxxxxxxx>
> >
> > Add hdma configuration support in include/linux/stmmac.h file.
> > The hdma configuration includes mapping of virtual DMAs to physical DMAs.
> > Define a new data structure stmmac_hdma_cfg to provide the mapping.
> >
> > Introduce new plat_stmmacenet_data::snps_id,snps_dev_id to allow glue
> > drivers to specify synopsys ID and device id respectively.
> > These values take precedence over reading from HW register. This facility
> > provides a mechanism to use setup function from stmmac core module and yet
> > override MAC.VERSION CSR if the glue driver chooses to do so.
> >
> > Signed-off-by: Jitendra Vegiraju <jitendra.vegiraju@xxxxxxxxxxxx>
> > ---
> > include/linux/stmmac.h | 48 ++++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 48 insertions(+)
> >
> > diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
> > index 338991c08f00..eb8136680a7b 100644
> > --- a/include/linux/stmmac.h
> > +++ b/include/linux/stmmac.h
> > @@ -89,6 +89,51 @@ struct stmmac_mdio_bus_data {
> > bool needs_reset;
> > };
> >
> > +/* DW25GMAC Hyper-DMA Overview
> > + * Hyper-DMA allows support for large number of Virtual DMA(VDMA)
> > + * channels using a smaller set of physical DMA channels(PDMA).
> > + * This is supported by the mapping of VDMAs to Traffic Class(TC)
> > + * and PDMA to TC in each traffic direction as shown below.
> > + *
> > + * VDMAs Traffic Class PDMA
> > + * +--------+ +------+ +-----------+
> > + * |VDMA0 |--------->| TC0 |-------->|PDMA0/TXQ0 |
> > + *TX +--------+ |----->+------+ +-----------+
> > + *Host=> +--------+ | +------+ +-----------+ => MAC
> > + *SW |VDMA1 |---+ | TC1 | +--->|PDMA1/TXQ1 |
> > + * +--------+ +------+ | +-----------+
> > + * +--------+ +------+----+ +-----------+
> > + * |VDMA2 |--------->| TC2 |-------->|PDMA2/TXQ1 |
> > + * +--------+ +------+ +-----------+
> > + * . . .
> > + * +--------+ +------+ +-----------+
> > + * |VDMAn-1 |--------->| TCx-1|-------->|PDMAm/TXQm |
> > + * +--------+ +------+ +-----------+
> > + *
> > + * +------+ +------+ +------+
> > + * |PDMA0 |--------->| TC0 |-------->|VDMA0 |
> > + * +------+ |----->+------+ +------+
> > + *MAC => +------+ | +------+ +------+
> > + *RXQs |PDMA1 |---+ | TC1 | +--->|VDMA1 | => Host
> > + * +------+ +------+ | +------+
> > + * . . .
> > + */
> > +
>
> > +/* Hyper-DMA mapping configuration
> > + * Traffic Class associated with each VDMA/PDMA mapping
> > + * is stored in corresponding array entry.
> > + */
> > +struct stmmac_hdma_cfg {
> > + u32 tx_vdmas; /* TX VDMA count */
> > + u32 rx_vdmas; /* RX VDMA count */
> > + u32 tx_pdmas; /* TX PDMA count */
> > + u32 rx_pdmas; /* RX PDMA count */
> > + u8 *tvdma_tc; /* Tx VDMA to TC mapping array */
> > + u8 *rvdma_tc; /* Rx VDMA to TC mapping array */
> > + u8 *tpdma_tc; /* Tx PDMA to TC mapping array */
> > + u8 *rpdma_tc; /* Rx PDMA to TC mapping array */
> > +};
> > +
> > struct stmmac_dma_cfg {
> > int pbl;
> > int txpbl;
> > @@ -101,6 +146,7 @@ struct stmmac_dma_cfg {
> > bool multi_msi_en;
> > bool dche;
> > bool atds;
> > + struct stmmac_hdma_cfg *hdma_cfg;
>
> Based on what you are implementing the _static_ VDMA-TC-PDMA channels
> mapping I really don't see a value of adding all of these data here.
> The whole implementation gets to be needlessly overcomplicated.
> Moreover AFAICS there are some channels left misconfigured in the
> Patch 2 code. Please see my comments there for more details.
>
I agree, with _static_ VDMA-TC-PDMA channels, maintaining the mapping data
appears complicated.
The real need comes when adding virtualization (SRIOV) capabilities.
I am analyzing your comments in patch2 and will respond after re-evaluation.
> > };
> >
> > #define AXI_BLEN 7
> > @@ -303,5 +349,7 @@ struct plat_stmmacenet_data {
> > int msi_tx_base_vec;
> > const struct dwmac4_addrs *dwmac4_addrs;
> > unsigned int flags;
>
> > + u32 snps_id;
> > + u32 snps_dev_id;
>
> Please move these fields to the head of the structure as the kind of
> crucial ones, and convert snps_dev_id to just dev_id.
>
> snps_id field name was selected based on the VERSION.SNPSVER field
> name (see SNPS prefix). Following that logic the VERSION.DEVID field
> should be converted to the dev_id name.
>
Thanks for explaining the thinking behind the field naming. That makes sense.
I was thinking of it as a prefix for synopsys fields.
Will make the change.
> -Serge(y)
>
> > };
> > #endif
> > --
> > 2.34.1
> >
