Re: [PATCH v8 00/11] PCI: imx6: Fix\rename\clean up and add lut information for imx95

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Aug 06, 2024 at 04:33:38PM -0400, Frank Li wrote:
> On Mon, Jul 29, 2024 at 04:18:07PM -0400, Frank Li wrote:
> > Fixed 8mp EP mode problem.
> >
> > imx6 actaully for all imx chips (imx6*, imx7*, imx8*, imx9*). To avoid
> > confuse, rename all imx6_* to imx_*, IMX6_* to IMX_*. pci-imx6.c to
> > pci-imx.c to avoid confuse.
> >
> > Using callback to reduce switch case for core reset and refclk.
> >
> > Base on linux 6.11-rc1
> >
> > To: Richard Zhu <hongxing.zhu@xxxxxxx>
> > To: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> > To: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
> > To: Krzysztof Wilczyński <kw@xxxxxxxxx>
> > To: Rob Herring <robh@xxxxxxxxxx>
> > To: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> > To: Shawn Guo <shawnguo@xxxxxxxxxx>
> > To: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> > To: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>
> > To: Fabio Estevam <festevam@xxxxxxxxx>
> > To: NXP Linux Team <linux-imx@xxxxxxx>
> > To: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
> > To: Liam Girdwood <lgirdwood@xxxxxxxxx>
> > To: Mark Brown <broonie@xxxxxxxxxx>
> > To: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> > To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>
> > To: Conor Dooley <conor+dt@xxxxxxxxxx>
> > Cc: linux-pci@xxxxxxxxxxxxxxx
> > Cc: imx@xxxxxxxxxxxxxxx
> > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > Cc: linux-kernel@xxxxxxxxxxxxxxx
> > Cc: bpf@xxxxxxxxxxxxxxx
> > Cc: devicetree@xxxxxxxxxxxxxxx
> > Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> >
> > Changes in v8:
> > - Rebase to 6.11-rc1
> > - Add Mani's review tags for 2, 6, 8, 9, 10
> > - Add fix patch PCI: imx6: Fix missing call to phy_power_off() in error handling
> > - keep enable_ref_clk(), I will add more code to make disabe/enable symtric
> > - Link to v7: https://lore.kernel.org/r/20240708-pci2_upstream-v7-0-ac00b8174f89@xxxxxxx
> 
> 
> Manivannan:
> 
> 	Do you have chance to review these again? Only few patch without
> your review tag.
> 

Done, series LGTM.

- Mani

> Frank
> 
> >
> > Changes in v7:
> > - rework commit message for PCI: imx6: Fix i.MX8MP PCIe EP's occasional failure to trigger MSI
> > - Add Mani's review tags for patch 1, 5
> > - Fix errata number in commit message for patch 6
> > - replace set_ref_clk with enable_ref_clk in patch 4
> > - using regmap_set(clear)_bits in patch 4
> > - Use exactly the same logic with original code at patch 4
> > - Add errata doc link for patch 6
> > - Fix miss "." at comment form patch 6.
> > - order include header for patch 9
> > - use cap register to set_speed for patch 9
> > - use PCIe in error msg for patch 9
> > - Remove reduntant ':' at patch 9' subject.
> > - Change range to ranges for patch 10.
> > - Change error code to -ENODEV for patch 10.
> > - Link to v6: https://lore.kernel.org/r/20240617-pci2_upstream-v6-0-e0821238f997@xxxxxxx
> >
> > Changes in v6:
> > - Base on Linux 6.10-rc1 by Bjorn's required.
> > - Remove imx95 LUT patch because it need more time to work out the
> > solution. This patch add 8qxp and 8qm and support and some bug fixes.
> > - Link to v5: https://lore.kernel.org/r/20240528-pci2_upstream-v5-0-750aa7edb8e2@xxxxxxx
> >
> > Changes in v5:
> > - Rebase to linux-pci next. fix conflict with gpiod change
> > - Add rob and cornor's review tag
> > - Link to v4: https://lore.kernel.org/r/20240507-pci2_upstream-v4-0-e8c80d874057@xxxxxxx
> >
> > Changes in v4:
> > - Improve comment message for patch 1 and 2.
> > - Rework commit message for patch 3 and add mani's review tag
> > - Remove file rename patch and update maintainer patch
> > - [PATCH v3 06/11] PCI: imx: Simplify switch-case logic by involve set_ref_clk callback
> > 	remove extra space.
> > 	keep original comments format (wrap at 80 column width)
> > 	update error message "'Failed to enable PCIe REFCLK'"
> > - PATCH v3 07/11] PCI: imx: Simplify switch-case logic by involve core_reset callback
> > 	keep exact the logic as original code
> > - Add patch to update comment about workaround ERR010728
> > - Add patch about help function imx_pcie_match_device()
> > - Using bus device notify to update LUT information for imx95 to avoid
> > parse iommu-map and msi-map in driver code.  Bus notify will better and
> > only update lut when device added.
> > - split patch call PHY interface function.
> > - Improve commit message for imx8q. remove local-address dts proptery. and
> > use standard "range" to convert cpu address to bus address.
> > - Check entry in cpu_fix function is too late. Check it at probe
> > - Link to v3: https://lore.kernel.org/r/20240402-pci2_upstream-v3-0-803414bdb430@xxxxxxx
> >
> > Changes in v3:
> > - Add an EP fixed patch
> >   PCI: imx6: Fix PCIe link down when i.MX8MM and i.MX8MP PCIe is EP mode
> >   PCI: imx6: Fix i.MX8MP PCIe EP can not trigger MSI
> > - Add 8qxp rc support
> > dt-bing yaml pass binding check
> > make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j8  dt_binding_check DT_SCHEMA_FILES=fsl,imx6q-pcie.yaml
> >   LINT    Documentation/devicetree/bindings
> >   DTEX    Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.example.dts
> >   CHKDT   Documentation/devicetree/bindings/processed-schema.json
> >   SCHEMA  Documentation/devicetree/bindings/processed-schema.json
> >   DTC_CHK Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.example.dtb
> >
> > - Link to v2: https://lore.kernel.org/r/20240304-pci2_upstream-v2-0-ad07c5eb6d67@xxxxxxx
> >
> > Changes in v2:
> > - remove file to 'pcie-imx.c'
> > - keep CONFIG unchange.
> > - Link to v1: https://lore.kernel.org/r/20240227-pci2_upstream-v1-0-b952f8333606@xxxxxxx
> >
> > ---
> > Frank Li (7):
> >       PCI: imx6: Fix missing call to phy_power_off() in error handling
> >       PCI: imx6: Rename imx6_* with imx_*
> >       PCI: imx6: Introduce SoC specific callbacks for controlling REFCLK
> >       PCI: imx6: Simplify switch-case logic by involve core_reset callback
> >       PCI: imx6: Improve comment for workaround ERR010728
> >       PCI: imx6: Consolidate redundant if-checks
> >       PCI: imx6: Call common PHY API to set mode, speed, and submode
> >
> > Richard Zhu (4):
> >       PCI: imx6: Fix establish link failure in EP mode for iMX8MM and iMX8MP
> >       PCI: imx6: Fix i.MX8MP PCIe EP's occasional failure to trigger MSI
> >       dt-bindings: imx6q-pcie: Add i.MX8Q pcie compatible string
> >       PCI: imx6: Add i.MX8Q PCIe root complex (RC) support
> >
> >  .../devicetree/bindings/pci/fsl,imx6q-pcie.yaml    |  16 +
> >  drivers/pci/controller/dwc/pci-imx6.c              | 989 +++++++++++----------
> >  2 files changed, 542 insertions(+), 463 deletions(-)
> > ---
> > base-commit: c428091cdcf7f368ad9884f8caa68b79cd6c333a
> > change-id: 20240227-pci2_upstream-0cdd19a15163
> >
> > Best regards,
> > ---
> > Frank Li <Frank.Li@xxxxxxx>
> >

-- 
மணிவண்ணன் சதாசிவம்




[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux