[PATCH v7 09/10] PCI: imx6: Call common PHY API to set mode, speed, and submode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Invoke the common PHY API to configure mode, speed, and submode. While
these functions are optional in the PHY interface, they are necessary for
certain PHY drivers. Lack of support for these functions in a PHY driver
does not cause harm.

Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
 drivers/pci/controller/dwc/pci-imx6.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 57814a0cfab8c..c72c7a0b0e02d 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -29,6 +29,7 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/reset.h>
+#include <linux/phy/pcie.h>
 #include <linux/phy/phy.h>
 #include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
@@ -229,6 +230,10 @@ static void imx_pcie_configure_type(struct imx_pcie *imx_pcie)
 
 	id = imx_pcie->controller_id;
 
+	/* If mode_mask is 0, then generic PHY driver is used to set the mode */
+	if (!drvdata->mode_mask[0])
+		return;
+
 	/* If mode_mask[id] is zero, means each controller have its individual gpr */
 	if (!drvdata->mode_mask[id])
 		id = 0;
@@ -807,7 +812,11 @@ static void imx_pcie_ltssm_enable(struct device *dev)
 {
 	struct imx_pcie *imx_pcie = dev_get_drvdata(dev);
 	const struct imx_pcie_drvdata *drvdata = imx_pcie->drvdata;
+	u8 offset = dw_pcie_find_capability(imx_pcie->pci, PCI_CAP_ID_EXP);
+	u32 tmp;
 
+	tmp = dw_pcie_readl_dbi(imx_pcie->pci, offset + PCI_EXP_LNKCAP);
+	phy_set_speed(imx_pcie->phy, FIELD_GET(PCI_EXP_LNKCAP_SLS, tmp));
 	if (drvdata->ltssm_mask)
 		regmap_update_bits(imx_pcie->iomuxc_gpr, drvdata->ltssm_off, drvdata->ltssm_mask,
 				   drvdata->ltssm_mask);
@@ -820,6 +829,7 @@ static void imx_pcie_ltssm_disable(struct device *dev)
 	struct imx_pcie *imx_pcie = dev_get_drvdata(dev);
 	const struct imx_pcie_drvdata *drvdata = imx_pcie->drvdata;
 
+	phy_set_speed(imx_pcie->phy, 0);
 	if (drvdata->ltssm_mask)
 		regmap_update_bits(imx_pcie->iomuxc_gpr, drvdata->ltssm_off,
 				   drvdata->ltssm_mask, 0);
@@ -955,6 +965,12 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
 			goto err_clk_disable;
 		}
 
+		ret = phy_set_mode_ext(imx_pcie->phy, PHY_MODE_PCIE, PHY_MODE_PCIE_RC);
+		if (ret) {
+			dev_err(dev, "unable to set PCIe PHY mode\n");
+			goto err_phy_off;
+		}
+
 		ret = phy_power_on(imx_pcie->phy);
 		if (ret) {
 			dev_err(dev, "waiting for PHY ready timeout!\n");

-- 
2.34.1





[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux