On Wed, Jun 19, 2024 at 01:20:48PM +0000, Tushar Vyavahare wrote:
> Introduce dynamic adjustment capabilities for fill_size, comp_size,
> tx_size, and rx_size parameters to support larger batch sizes beyond the
you are only introducing fill_size and comp_size to xsk_umem_info. The
latter two seem to be in place.
> previous 2K limit.
>
> Update HW_SW_MAX_RING_SIZE test cases to evaluate AF_XDP's robustness by
> pushing hardware and software ring sizes to their limits. This test
> ensures AF_XDP's reliability amidst potential producer/consumer throttling
> due to maximum ring utilization.
>
> Signed-off-by: Tushar Vyavahare <tushar.vyavahare@xxxxxxxxx>
> ---
> tools/testing/selftests/bpf/xskxceiver.c | 26 ++++++++++++++++++------
> tools/testing/selftests/bpf/xskxceiver.h | 2 ++
> 2 files changed, 22 insertions(+), 6 deletions(-)
>
> diff --git a/tools/testing/selftests/bpf/xskxceiver.c b/tools/testing/selftests/bpf/xskxceiver.c
> index 088df53869e8..5b049f0296e6 100644
> --- a/tools/testing/selftests/bpf/xskxceiver.c
> +++ b/tools/testing/selftests/bpf/xskxceiver.c
> @@ -196,6 +196,12 @@ static int xsk_configure_umem(struct ifobject *ifobj, struct xsk_umem_info *umem
> };
> int ret;
>
> + if (umem->fill_size)
> + cfg.fill_size = umem->fill_size;
> +
> + if (umem->comp_size)
> + cfg.comp_size = umem->comp_size;
> +
> if (umem->unaligned_mode)
> cfg.flags |= XDP_UMEM_UNALIGNED_CHUNK_FLAG;
>
> @@ -265,6 +271,10 @@ static int __xsk_configure_socket(struct xsk_socket_info *xsk, struct xsk_umem_i
> cfg.bind_flags |= XDP_SHARED_UMEM;
> if (ifobject->mtu > MAX_ETH_PKT_SIZE)
> cfg.bind_flags |= XDP_USE_SG;
> + if (umem->fill_size)
> + cfg.tx_size = umem->fill_size;
> + if (umem->comp_size)
> + cfg.rx_size = umem->comp_size;
how is the fq related to txq ? and cq to rxq? shouldn't this be fq-rxq and
cq-txq. What is the intent here? In the end they are the same in your
test.
>
> txr = ifobject->tx_on ? &xsk->tx : NULL;
> rxr = ifobject->rx_on ? &xsk->rx : NULL;
> @@ -1616,7 +1626,7 @@ static void xsk_populate_fill_ring(struct xsk_umem_info *umem, struct pkt_stream
> if (umem->num_frames < XSK_RING_PROD__DEFAULT_NUM_DESCS)
> buffers_to_fill = umem->num_frames;
> else
> - buffers_to_fill = XSK_RING_PROD__DEFAULT_NUM_DESCS;
> + buffers_to_fill = umem->fill_size;
>
> ret = xsk_ring_prod__reserve(&umem->fq, buffers_to_fill, &idx);
> if (ret != buffers_to_fill)
> @@ -2445,7 +2455,7 @@ static int testapp_hw_sw_min_ring_size(struct test_spec *test)
>
> static int testapp_hw_sw_max_ring_size(struct test_spec *test)
> {
> - u32 max_descs = XSK_RING_PROD__DEFAULT_NUM_DESCS * 2;
> + u32 max_descs = XSK_RING_PROD__DEFAULT_NUM_DESCS * 4;
> int ret;
>
> test->set_ring = true;
> @@ -2453,7 +2463,8 @@ static int testapp_hw_sw_max_ring_size(struct test_spec *test)
> test->ifobj_tx->ring.tx_pending = test->ifobj_tx->ring.tx_max_pending;
> test->ifobj_tx->ring.rx_pending = test->ifobj_tx->ring.rx_max_pending;
> test->ifobj_rx->umem->num_frames = max_descs;
> - test->ifobj_rx->xsk->rxqsize = max_descs;
rxqsize is only used for setting xsk_socket_config::rx_size ?
> + test->ifobj_rx->umem->fill_size = max_descs;
> + test->ifobj_rx->umem->comp_size = max_descs;
> test->ifobj_tx->xsk->batch_size = XSK_RING_PROD__DEFAULT_NUM_DESCS;
> test->ifobj_rx->xsk->batch_size = XSK_RING_PROD__DEFAULT_NUM_DESCS;
>
> @@ -2461,9 +2472,12 @@ static int testapp_hw_sw_max_ring_size(struct test_spec *test)
> if (ret)
> return ret;
>
> - /* Set batch_size to 4095 */
> - test->ifobj_tx->xsk->batch_size = max_descs - 1;
> - test->ifobj_rx->xsk->batch_size = max_descs - 1;
> + /* Set batch_size to 8152 for testing, as the ice HW ignores the 3 lowest bits when updating
> + * the Rx HW tail register.
i would wrap the comment to 80 chars but that's personal taste.
> + */
> + test->ifobj_tx->xsk->batch_size = test->ifobj_tx->ring.tx_max_pending - 8;
> + test->ifobj_rx->xsk->batch_size = test->ifobj_tx->ring.tx_max_pending - 8;
> + pkt_stream_replace(test, max_descs, MIN_PKT_SIZE);
> return testapp_validate_traffic(test);
> }
>
> diff --git a/tools/testing/selftests/bpf/xskxceiver.h b/tools/testing/selftests/bpf/xskxceiver.h
> index 906de5fab7a3..885c948c5d83 100644
> --- a/tools/testing/selftests/bpf/xskxceiver.h
> +++ b/tools/testing/selftests/bpf/xskxceiver.h
> @@ -80,6 +80,8 @@ struct xsk_umem_info {
> void *buffer;
> u32 frame_size;
> u32 base_addr;
> + u32 fill_size;
> + u32 comp_size;
> bool unaligned_mode;
> };
>
> --
> 2.34.1
>
