Invoke the common PHY API to configure mode, speed, and submode. While
these functions are optional in the PHY interface, they are necessary for
certain PHY drivers. Lack of support for these functions in a PHY driver
does not cause harm.
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
drivers/pci/controller/dwc/pci-imx6.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index ab0ed7ab3007a..18c133f5a56fc 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -30,6 +30,7 @@
#include <linux/interrupt.h>
#include <linux/reset.h>
#include <linux/phy/phy.h>
+#include <linux/phy/pcie.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
@@ -229,6 +230,10 @@ static void imx_pcie_configure_type(struct imx_pcie *imx_pcie)
id = imx_pcie->controller_id;
+ /* If mode_mask[0] is 0, means use phy driver to set mode */
+ if (!drvdata->mode_mask[0])
+ return;
+
/* If mode_mask[id] is zero, means each controller have its individual gpr */
if (!drvdata->mode_mask[id])
id = 0;
@@ -808,6 +813,7 @@ static void imx_pcie_ltssm_enable(struct device *dev)
struct imx_pcie *imx_pcie = dev_get_drvdata(dev);
const struct imx_pcie_drvdata *drvdata = imx_pcie->drvdata;
+ phy_set_speed(imx_pcie->phy, PCI_EXP_LNKCAP_SLS_2_5GB);
if (drvdata->ltssm_mask)
regmap_update_bits(imx_pcie->iomuxc_gpr, drvdata->ltssm_off, drvdata->ltssm_mask,
drvdata->ltssm_mask);
@@ -820,6 +826,7 @@ static void imx_pcie_ltssm_disable(struct device *dev)
struct imx_pcie *imx_pcie = dev_get_drvdata(dev);
const struct imx_pcie_drvdata *drvdata = imx_pcie->drvdata;
+ phy_set_speed(imx_pcie->phy, 0);
if (drvdata->ltssm_mask)
regmap_update_bits(imx_pcie->iomuxc_gpr, drvdata->ltssm_off,
drvdata->ltssm_mask, 0);
@@ -955,6 +962,12 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
goto err_clk_disable;
}
+ ret = phy_set_mode_ext(imx_pcie->phy, PHY_MODE_PCIE, PHY_MODE_PCIE_RC);
+ if (ret) {
+ dev_err(dev, "unable to set pcie PHY mode\n");
+ goto err_phy_off;
+ }
+
ret = phy_power_on(imx_pcie->phy);
if (ret) {
dev_err(dev, "waiting for PHY ready timeout!\n");
--
2.34.1
