On Thu, 5 Dec 2019 at 16:52, Maxim Mikityanskiy <maximmi@xxxxxxxxxxxx> wrote: > > After disabling resources necessary for XSK (the XDP program, channels, > XSK queues), use synchronize_rcu to wait until the XSK wakeup function > finishes, before freeing the resources. > > Suspend XSK wakeups during switching channels. If the XDP program is > being removed, synchronize_rcu before closing the old channels to allow > XSK wakeup to complete. > > Signed-off-by: Maxim Mikityanskiy <maximmi@xxxxxxxxxxxx> > --- > drivers/net/ethernet/mellanox/mlx5/core/en.h | 2 +- > .../net/ethernet/mellanox/mlx5/core/en/xdp.h | 22 ++++++++----------- > .../mellanox/mlx5/core/en/xsk/setup.c | 1 + > .../ethernet/mellanox/mlx5/core/en/xsk/tx.c | 2 +- > .../net/ethernet/mellanox/mlx5/core/en_main.c | 19 +--------------- > 5 files changed, 13 insertions(+), 33 deletions(-) > > diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h > index f1a7bc46f1c0..61084c3744ba 100644 > --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h > +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h > @@ -760,7 +760,7 @@ enum { > MLX5E_STATE_OPENED, > MLX5E_STATE_DESTROYING, > MLX5E_STATE_XDP_TX_ENABLED, > - MLX5E_STATE_XDP_OPEN, > + MLX5E_STATE_XDP_ACTIVE, > }; > > struct mlx5e_rqt { > diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h b/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h > index 36ac1e3816b9..d7587f40ecae 100644 > --- a/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h > +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h > @@ -75,12 +75,18 @@ int mlx5e_xdp_xmit(struct net_device *dev, int n, struct xdp_frame **frames, > static inline void mlx5e_xdp_tx_enable(struct mlx5e_priv *priv) > { > set_bit(MLX5E_STATE_XDP_TX_ENABLED, &priv->state); > + > + if (priv->channels.params.xdp_prog) > + set_bit(MLX5E_STATE_XDP_ACTIVE, &priv->state); > } > > static inline void mlx5e_xdp_tx_disable(struct mlx5e_priv *priv) > { > + if (priv->channels.params.xdp_prog) > + clear_bit(MLX5E_STATE_XDP_ACTIVE, &priv->state); > + > clear_bit(MLX5E_STATE_XDP_TX_ENABLED, &priv->state); > - /* let other device's napi(s) see our new state */ > + /* Let other device's napi(s) and XSK wakeups see our new state. */ > synchronize_rcu(); > } > > @@ -89,19 +95,9 @@ static inline bool mlx5e_xdp_tx_is_enabled(struct mlx5e_priv *priv) > return test_bit(MLX5E_STATE_XDP_TX_ENABLED, &priv->state); > } > > -static inline void mlx5e_xdp_set_open(struct mlx5e_priv *priv) > -{ > - set_bit(MLX5E_STATE_XDP_OPEN, &priv->state); > -} > - > -static inline void mlx5e_xdp_set_closed(struct mlx5e_priv *priv) > -{ > - clear_bit(MLX5E_STATE_XDP_OPEN, &priv->state); > -} > - > -static inline bool mlx5e_xdp_is_open(struct mlx5e_priv *priv) > +static inline bool mlx5e_xdp_is_active(struct mlx5e_priv *priv) > { > - return test_bit(MLX5E_STATE_XDP_OPEN, &priv->state); > + return test_bit(MLX5E_STATE_XDP_ACTIVE, &priv->state); > } > > static inline void mlx5e_xmit_xdp_doorbell(struct mlx5e_xdpsq *sq) > diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c b/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c > index 631af8dee517..c28cbae42331 100644 > --- a/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c > +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c > @@ -144,6 +144,7 @@ void mlx5e_close_xsk(struct mlx5e_channel *c) > { > clear_bit(MLX5E_CHANNEL_STATE_XSK, c->state); > napi_synchronize(&c->napi); > + synchronize_rcu(); /* Sync with the XSK wakeup. */ Again, so my idea was that the read-lock can be done here, instead of the generic AF_XDP code, since it's driver specific. Agree? > > mlx5e_close_rq(&c->xskrq); > mlx5e_close_cq(&c->xskrq.cq); > diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/tx.c > index 87827477d38c..fe2d596cb361 100644 > --- a/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/tx.c > +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/tx.c > @@ -14,7 +14,7 @@ int mlx5e_xsk_wakeup(struct net_device *dev, u32 qid, u32 flags) > struct mlx5e_channel *c; > u16 ix; > > - if (unlikely(!mlx5e_xdp_is_open(priv))) > + if (unlikely(!mlx5e_xdp_is_active(priv))) > return -ENETDOWN; > > if (unlikely(!mlx5e_qid_get_ch_if_in_group(params, qid, MLX5E_RQ_GROUP_XSK, &ix))) > diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c > index 09ed7f5f688b..fe1a42fa214b 100644 > --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c > +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c > @@ -3006,12 +3006,9 @@ void mlx5e_timestamp_init(struct mlx5e_priv *priv) > int mlx5e_open_locked(struct net_device *netdev) > { > struct mlx5e_priv *priv = netdev_priv(netdev); > - bool is_xdp = priv->channels.params.xdp_prog; > int err; > > set_bit(MLX5E_STATE_OPENED, &priv->state); > - if (is_xdp) > - mlx5e_xdp_set_open(priv); > > err = mlx5e_open_channels(priv, &priv->channels); > if (err) > @@ -3026,8 +3023,6 @@ int mlx5e_open_locked(struct net_device *netdev) > return 0; > > err_clear_state_opened_flag: > - if (is_xdp) > - mlx5e_xdp_set_closed(priv); > clear_bit(MLX5E_STATE_OPENED, &priv->state); > return err; > } > @@ -3059,8 +3054,6 @@ int mlx5e_close_locked(struct net_device *netdev) > if (!test_bit(MLX5E_STATE_OPENED, &priv->state)) > return 0; > > - if (priv->channels.params.xdp_prog) > - mlx5e_xdp_set_closed(priv); > clear_bit(MLX5E_STATE_OPENED, &priv->state); > > netif_carrier_off(priv->netdev); > @@ -4377,16 +4370,6 @@ static int mlx5e_xdp_allowed(struct mlx5e_priv *priv, struct bpf_prog *prog) > return 0; > } > > -static int mlx5e_xdp_update_state(struct mlx5e_priv *priv) > -{ > - if (priv->channels.params.xdp_prog) > - mlx5e_xdp_set_open(priv); > - else > - mlx5e_xdp_set_closed(priv); > - > - return 0; > -} > - > static int mlx5e_xdp_set(struct net_device *netdev, struct bpf_prog *prog) > { > struct mlx5e_priv *priv = netdev_priv(netdev); > @@ -4421,7 +4404,7 @@ static int mlx5e_xdp_set(struct net_device *netdev, struct bpf_prog *prog) > mlx5e_set_rq_type(priv->mdev, &new_channels.params); > old_prog = priv->channels.params.xdp_prog; > > - err = mlx5e_safe_switch_channels(priv, &new_channels, mlx5e_xdp_update_state); > + err = mlx5e_safe_switch_channels(priv, &new_channels, NULL); > if (err) > goto unlock; > } else { > -- > 2.20.1 >