Re: [PATCH v3 06/11] PCI: imx: Simplify switch-case logic by involve set_ref_clk callback

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Apr 02, 2024 at 10:33:42AM -0400, Frank Li wrote:

PCI: imx6: Introduce SoC specific callbacks for controlling REFCLK

> Instead of using the switch case statement to enable/disable the reference
> clock handled by this driver itself, let's introduce a new callback
> set_ref_clk() and define it for platforms that require it. This simplifies
> the code.
> 
> Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> ---
>  drivers/pci/controller/dwc/pcie-imx.c | 119 ++++++++++++++++------------------
>  1 file changed, 55 insertions(+), 64 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-imx.c b/drivers/pci/controller/dwc/pcie-imx.c
> index e93070d60df52..77dae5c3f7057 100644
> --- a/drivers/pci/controller/dwc/pcie-imx.c
> +++ b/drivers/pci/controller/dwc/pcie-imx.c
> @@ -103,6 +103,7 @@ struct imx_pcie_drvdata {
>  	const u32 mode_mask[IMX_PCIE_MAX_INSTANCES];
>  	const struct pci_epc_features *epc_features;
>  	int (*init_phy)(struct imx_pcie *pcie);
> +	int (*set_ref_clk)(struct imx_pcie *pcie, bool enable);
>  };
>  
>  struct imx_pcie {
> @@ -585,77 +586,54 @@ static int imx_pcie_attach_pd(struct device *dev)
>  	return 0;
>  }
>  
> -static int imx_pcie_enable_ref_clk(struct imx_pcie *imx_pcie)
> +static int imx6sx_pcie_set_ref_clk(struct imx_pcie *imx_pcie, bool enable)
>  {
> -	unsigned int offset;
> -	int ret = 0;
> +	regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX6SX_GPR12_PCIE_TEST_POWERDOWN,
> +			   enable ? 0 : IMX6SX_GPR12_PCIE_TEST_POWERDOWN);
>  
> -	switch (imx_pcie->drvdata->variant) {
> -	case IMX6SX:
> -		regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
> -				   IMX6SX_GPR12_PCIE_TEST_POWERDOWN, 0);
> -		break;
> -	case IMX6QP:
> -	case IMX6Q:
> +	return 0;
> +}
> +
> +static int imx6q_pcie_set_ref_clk(struct imx_pcie *imx_pcie, bool enable)
> +{
> +	if (enable) {
>  		/* power up core phy and enable ref clock */
> -		regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
> -				   IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
> +		regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_TEST_PD, 0);
>  		/*
> -		 * the async reset input need ref clock to sync internally,
> -		 * when the ref clock comes after reset, internal synced
> -		 * reset time is too short, cannot meet the requirement.
> -		 * add one ~10us delay here.
> +		 * the async reset input need ref clock to sync internally, when the ref clock comes
> +		 * after reset, internal synced reset time is too short, cannot meet the
> +		 * requirement.add one ~10us delay here.

Please wrap the comments to 80 column width.

>  		 */
>  		usleep_range(10, 100);
>  		regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
> -				   IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
> -		break;
> -	case IMX7D:
> -	case IMX95:
> -	case IMX95_EP:
> -		break;
> -	case IMX8MM:
> -	case IMX8MM_EP:
> -	case IMX8MQ:
> -	case IMX8MQ_EP:
> -	case IMX8MP:
> -	case IMX8MP_EP:
> -		offset = imx_pcie_grp_offset(imx_pcie);
> -		/*
> -		 * Set the over ride low and enabled
> -		 * make sure that REF_CLK is turned on.
> -		 */
> -		regmap_update_bits(imx_pcie->iomuxc_gpr, offset,
> -				   IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE,
> -				   0);
> -		regmap_update_bits(imx_pcie->iomuxc_gpr, offset,
> -				   IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN,
> -				   IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN);
> -		break;
> +				   IMX6Q_GPR1_PCIE_REF_CLK_EN, IMX6Q_GPR1_PCIE_REF_CLK_EN);
> +	} else {
> +		regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
> +				   IMX6Q_GPR1_PCIE_REF_CLK_EN, 0);
> +		regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
> +				   IMX6Q_GPR1_PCIE_TEST_PD, IMX6Q_GPR1_PCIE_TEST_PD);
>  	}
>  
> -	return ret;
> +	return 0;
>  }
>  
> -static void imx_pcie_disable_ref_clk(struct imx_pcie *imx_pcie)
> +static int imx8mm_pcie_set_ref_clk(struct imx_pcie *imx_pcie, bool enable)
>  {
> -	switch (imx_pcie->drvdata->variant) {
> -	case IMX6QP:
> -	case IMX6Q:
> -		regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
> -				IMX6Q_GPR1_PCIE_REF_CLK_EN, 0);
> -		regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR1,
> -				IMX6Q_GPR1_PCIE_TEST_PD,
> -				IMX6Q_GPR1_PCIE_TEST_PD);
> -		break;
> -	case IMX7D:
> -		regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
> -				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
> -				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
> -		break;
> -	default:
> -		break;
> -	}
> +	int offset = imx_pcie_grp_offset(imx_pcie);
> +
> +	/* Set the over ride low and enabled make sure that REF_CLK is turned on.*/
> +	regmap_update_bits(imx_pcie->iomuxc_gpr, offset, IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE,
> +			   enable ? 0 : IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE);
> +	regmap_update_bits(imx_pcie->iomuxc_gpr, offset, IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN,
> +			   enable ? IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN :  0);

Extra space after :

> +	return 0;
> +}
> +
> +static int imx7d_pcie_set_ref_clk(struct imx_pcie *imx_pcie, bool enable)
> +{
> +	regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
> +			    enable ? 0 : IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
> +	return 0;
>  }
>  
>  static int imx_pcie_clk_enable(struct imx_pcie *imx_pcie)
> @@ -668,10 +646,12 @@ static int imx_pcie_clk_enable(struct imx_pcie *imx_pcie)
>  	if (ret)
>  		return ret;
>  
> -	ret = imx_pcie_enable_ref_clk(imx_pcie);
> -	if (ret) {
> -		dev_err(dev, "unable to enable pcie ref clock\n");
> -		goto err_ref_clk;
> +	if (imx_pcie->drvdata->set_ref_clk) {
> +		ret = imx_pcie->drvdata->set_ref_clk(imx_pcie, true);
> +		if (ret) {
> +			dev_err(dev, "unable to enable pcie ref clock\n");

'Failed to enable PCIe REFCLK'

- Mani

-- 
மணிவண்ணன் சதாசிவம்




[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux