[PATCH net-next v5 9/9] stmmac: intel: interface switching support for ADL-N platform

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



'intel_get_pcs_neg_mode' and 'intel_config_serdes' was provided to
handle interface mode change for ADL-S platform.

Modphy register lane was provided to configure serdes on interface
mode changing.

Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@xxxxxxxxx>
Signed-off-by: Choong Yong Liang <yong.liang.choong@xxxxxxxxxxxxxxx>
---
 .../net/ethernet/stmicro/stmmac/dwmac-intel.c | 49 ++++++++++++++++++-
 .../net/ethernet/stmicro/stmmac/dwmac-intel.h |  2 +
 2 files changed, 50 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index c79d8e3c3b24..f0f3d35bdb69 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -992,6 +992,53 @@ static int adls_sgmii_phy1_data(struct pci_dev *pdev,
 static struct stmmac_pci_info adls_sgmii1g_phy1_info = {
 	.setup = adls_sgmii_phy1_data,
 };
+
+static int adln_common_data(struct pci_dev *pdev,
+			    struct plat_stmmacenet_data *plat)
+{
+	struct intel_priv_data *intel_priv = plat->bsp_priv;
+
+	plat->rx_queues_to_use = 6;
+	plat->tx_queues_to_use = 4;
+	plat->clk_ptp_rate = 204800000;
+
+	plat->safety_feat_cfg->tsoee = 1;
+	plat->safety_feat_cfg->mrxpee = 0;
+	plat->safety_feat_cfg->mestee = 1;
+	plat->safety_feat_cfg->mrxee = 1;
+	plat->safety_feat_cfg->mtxee = 1;
+	plat->safety_feat_cfg->epsi = 0;
+	plat->safety_feat_cfg->edpp = 0;
+	plat->safety_feat_cfg->prtyen = 0;
+	plat->safety_feat_cfg->tmouten = 0;
+
+	intel_priv->tsn_lane_registers = adln_tsn_lane_registers;
+	intel_priv->max_tsn_lane_registers = ARRAY_SIZE(adln_tsn_lane_registers);
+
+	return intel_mgbe_common_data(pdev, plat);
+}
+
+static int adln_sgmii_phy0_data(struct pci_dev *pdev,
+				struct plat_stmmacenet_data *plat)
+{
+	struct intel_priv_data *intel_priv = plat->bsp_priv;
+
+	plat->bus_id = 1;
+	plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
+	plat->max_speed = SPEED_2500;
+	plat->serdes_powerup = intel_serdes_powerup;
+	plat->serdes_powerdown = intel_serdes_powerdown;
+	plat->get_pcs_neg_mode = intel_get_pcs_neg_mode;
+	plat->config_serdes = intel_config_serdes;
+	intel_priv->pid_modphy = PID_MODPHY1;
+
+	return adln_common_data(pdev, plat);
+}
+
+static struct stmmac_pci_info adln_sgmii1g_phy0_info = {
+	.setup = adln_sgmii_phy0_data,
+};
+
 static const struct stmmac_pci_func_data galileo_stmmac_func_data[] = {
 	{
 		.func = 6,
@@ -1374,7 +1421,7 @@ static const struct pci_device_id intel_eth_pci_id_table[] = {
 	{ PCI_DEVICE_DATA(INTEL, TGLH_SGMII1G_1, &tgl_sgmii1g_phy1_info) },
 	{ PCI_DEVICE_DATA(INTEL, ADLS_SGMII1G_0, &adls_sgmii1g_phy0_info) },
 	{ PCI_DEVICE_DATA(INTEL, ADLS_SGMII1G_1, &adls_sgmii1g_phy1_info) },
-	{ PCI_DEVICE_DATA(INTEL, ADLN_SGMII1G, &tgl_sgmii1g_phy0_info) },
+	{ PCI_DEVICE_DATA(INTEL, ADLN_SGMII1G, &adln_sgmii1g_phy0_info) },
 	{ PCI_DEVICE_DATA(INTEL, RPLP_SGMII1G, &tgl_sgmii1g_phy0_info) },
 	{}
 };
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h
index 093eed977ab0..2c6b50958988 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h
@@ -124,8 +124,10 @@ static const struct pmc_serdes_regs pid_modphy1_2p5g_regs[] = {
 	{}
 };
 
+static const int adln_tsn_lane_registers[] = {6};
 static const int ehl_tsn_lane_registers[] = {7, 8, 9, 10, 11};
 #else
+static const int adln_tsn_lane_registers[] = {};
 static const int ehl_tsn_lane_registers[] = {};
 #endif /* CONFIG_INTEL_PMC_IPC */
 
-- 
2.34.1





[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux