Re: [PATCH bpf-next v4 0/3] Annotate kfuncs in .BTF_ids section

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Jan 28, 2024 at 06:24:05PM -0700, Daniel Xu wrote:
> === Description ===
> 
> This is a bpf-treewide change that annotates all kfuncs as such inside
> .BTF_ids. This annotation eventually allows us to automatically generate
> kfunc prototypes from bpftool.
> 
> We store this metadata inside a yet-unused flags field inside struct
> btf_id_set8 (thanks Kumar!). pahole will be taught where to look.
> 
> More details about the full chain of events are available in commit 3's
> description.
> 
> The accompanying pahole and bpftool changes can be viewed
> here on these "frozen" branches [0][1].
> 
> [0]: https://github.com/danobi/pahole/tree/kfunc_btf-v3-mailed
> [1]: https://github.com/danobi/linux/tree/kfunc_bpftool-mailed


I hit a similar issue to [0] on master
943b043aeecc ("selftests/bpf: Fix bench runner SIGSEGV")
 when cross-compiling on x86_64 (LE) to s390x (BE).
I do have CONFIG_DEBUG_INFO_BTF enable and the issue would not trigger if
I disabled CONFIG_DEBUG_INFO_BTF (and with the fix mentioned in [0]).

What seems to happen is that `tools/resolve_btfids` is ran in the context of the
host endianess and if I printk before the WARN_ON:
diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c
index ef380e546952..a9ed7a1a4936 100644
  --- a/kernel/bpf/btf.c
  +++ b/kernel/bpf/btf.c
  @@ -8128,6 +8128,7 @@ int register_btf_kfunc_id_set(enum bpf_prog_type prog_type,
           * WARN() for initcall registrations that do not check errors.
           */
          if (!(kset->set->flags & BTF_SET8_KFUNCS)) {
  +        printk("Flag 0x%08X, expected 0x%08X\n", kset->set->flags, BTF_SET8_KFUNCS);
                  WARN_ON(!kset->owner);
                  return -EINVAL;
          }

the boot logs would show:
  Flag 0x01000000, expected 0x00000001

The issue did not happen prior to
6f3189f38a3e ("bpf: treewide: Annotate BPF kfuncs in BTF")
has only 0 was written before.

It seems [1] will be addressing cross-compilation, but it did not fix it as is
by just applying on top of master, so probably some of the changes will also need
to be ported to `tools/include/linux/btf_ids.h`?

A hacky workaround to cross-compilation I have is to apply:

  diff --git a/tools/bpf/resolve_btfids/Makefile b/tools/bpf/resolve_btfids/Makefile
  index 4b8079f294f6..b706e7ab066f 100644
  --- a/tools/bpf/resolve_btfids/Makefile
  +++ b/tools/bpf/resolve_btfids/Makefile
  @@ -22,10 +22,10 @@ HOST_OVERRIDES := AR="$(HOSTAR)" CC="$(HOSTCC)" LD="$(HOSTLD)" ARCH="$(HOSTARCH)
                    CROSS_COMPILE="" EXTRA_CFLAGS="$(HOSTCFLAGS)"
   RM      ?= rm
  -HOSTCC  ?= gcc
  -HOSTLD  ?= ld
  -HOSTAR  ?= ar
  -CROSS_COMPILE =
  +HOSTCC  = $(CC)
  +HOSTLD  = $(LD)
  +HOSTAR  = $(AR)
  +#CROSS_COMPILE =
   OUTPUT ?= $(srctree)/tools/bpf/resolve_btfids/
  @@ -56,16 +56,16 @@ $(OUTPUT) $(OUTPUT)/libsubcmd $(LIBBPF_OUT):
   $(SUBCMDOBJ): fixdep FORCE | $(OUTPUT)/libsubcmd
          $(Q)$(MAKE) -C $(SUBCMD_SRC) OUTPUT=$(SUBCMD_OUT) \
  -                   DESTDIR=$(SUBCMD_DESTDIR) $(HOST_OVERRIDES) prefix= subdir= \
  +                   DESTDIR=$(SUBCMD_DESTDIR) prefix= subdir= \
                      $(abspath $@) install_headers
   $(BPFOBJ): $(wildcard $(LIBBPF_SRC)/*.[ch] $(LIBBPF_SRC)/Makefile) | $(LIBBPF_OUT)
          $(Q)$(MAKE) $(submake_extras) -C $(LIBBPF_SRC) OUTPUT=$(LIBBPF_OUT)    \
  -                   DESTDIR=$(LIBBPF_DESTDIR) $(HOST_OVERRIDES) prefix= subdir= \
  +                   DESTDIR=$(LIBBPF_DESTDIR) prefix= subdir= \
                      $(abspath $@) install_headers
  -LIBELF_FLAGS := $(shell $(HOSTPKG_CONFIG) libelf --cflags 2>/dev/null)
  -LIBELF_LIBS  := $(shell $(HOSTPKG_CONFIG) libelf --libs 2>/dev/null || echo -lelf)
  +LIBELF_FLAGS := $(shell $(PKG_CONFIG) libelf --cflags 2>/dev/null)
  +LIBELF_LIBS  := $(shell $(PKG_CONFIG) libelf --libs 2>/dev/null || echo -lelf)
   HOSTCFLAGS_resolve_btfids += -g \
             -I$(srctree)/tools/include \
  @@ -84,7 +84,7 @@ $(BINARY_IN): fixdep FORCE prepare | $(OUTPUT)
   $(BINARY): $(BPFOBJ) $(SUBCMDOBJ) $(BINARY_IN)
          $(call msg,LINK,$@)
  -       $(Q)$(HOSTCC) $(BINARY_IN) $(KBUILD_HOSTLDFLAGS) -o $@ $(BPFOBJ) $(SUBCMDOBJ) $(LIBS)
  +       $(Q)$(CC) $(BINARY_IN) $(KBUILD_HOSTLDFLAGS) -o $@ $(BPFOBJ) $(SUBCMDOBJ) $(LIBS)
   clean_objects := $(wildcard $(OUTPUT)/*.o                \
                               $(OUTPUT)/.*.o.cmd           \
  diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
  index a38a3001527c..5cd193c04448 100644
  --- a/tools/testing/selftests/bpf/Makefile
  +++ b/tools/testing/selftests/bpf/Makefile
  @@ -171,7 +171,7 @@ INCLUDE_DIR := $(SCRATCH_DIR)/include
   BPFOBJ := $(BUILD_DIR)/libbpf/libbpf.a
   ifneq ($(CROSS_COMPILE),)
   HOST_BUILD_DIR         := $(BUILD_DIR)/host
  -HOST_SCRATCH_DIR       := $(OUTPUT)/host-tools
  +HOST_SCRATCH_DIR       := $(SCRATCH_DIR)
   HOST_INCLUDE_DIR       := $(HOST_SCRATCH_DIR)/include
   else
   HOST_BUILD_DIR         := $(BUILD_DIR)

This causes `resolve_btfids` to be compiled in the target endianess and gets
magically run provided that the hosts has `qemu-s390x-static` and a functional
binfmt_misc [2] on the host, but having this using host architecture per [1]
is likely better.

Here are steps to reproduce the issue on Ubuntu 23.10 and assuming
danobi/vmtest [3] is installed:

  XPLATFORM="s390x"
  XARCH="s390"
  # Set up repo for s390x
  cat <<EOF >> /etc/apt/sources.list.d/s390x.list
  deb [arch=s390x] http://ports.ubuntu.com/ubuntu-ports  mantic main restricted
  deb [arch=s390x] http://ports.ubuntu.com/ubuntu-ports  mantic-updates main restricted
  EOF
  sudo dpkg --add-architecture s390x
  
  apt install qemu-system-s390x qemu-user-static g{cc,++}-"${XARCH}-linux-gnu" {libelf-dev,libssl-dev,pkgconf}:s390x
  
  KBUILD_OUTPUT_DIR="/tmp/kbuild-${XPLATFORM}"
  mkdir "${KBUILD_OUTPUT_DIR}"
  cat tools/testing/selftests/bpf/config{,.vm,.${XPLATFORM}} > ${KBUILD_OUTPUT_DIR}/.config
  
  make ARCH="${XARCH}" CROSS_COMPILE="${XPLATFORM}-linux-gnu-" O="${KBUILD_OUTPUT_DIR}"  -j$((4 * $(nproc))) olddefconfig
  make ARCH="${XARCH}" CROSS_COMPILE="${XPLATFORM}-linux-gnu-" O="${KBUILD_OUTPUT_DIR}"  -j$((4 * $(nproc))) all
  
  # No need for a s390x ubuntu 23.10 rootfs, we only care about booting the kernel
  vmtest -k "${KBUILD_OUTPUT_DIR}/arch/s390/boot/bzImage" -a s390x "uname -m" | cat


For the chroot route, see [4].

[0] https://lore.kernel.org/linux-kernel/20240201155339.2b5936be@xxxxxxxxxxxxxxxx/T/
[1] https://lore.kernel.org/bpf/cover.1706717857.git.vmalik@xxxxxxxxxx/
[2] https://en.wikipedia.org/wiki/Binfmt_misc
[3] https://github.com/danobi/vmtest
[4] https://chantra.github.io/bpfcitools/bpf-cross-compile.html

Manu

> 
> === Changelog ===
> 
> Changes from v3:
> * Rebase to bpf-next and add missing annotation on new kfunc
> 
> Changes from v2:
> * Only WARN() for vmlinux kfuncs
> 
> Changes from v1:
> * Move WARN_ON() up a call level
> * Also return error when kfunc set is not properly tagged
> * Use BTF_KFUNCS_START/END instead of flags
> * Rename BTF_SET8_KFUNC to BTF_SET8_KFUNCS
> 
> Daniel Xu (3):
>   bpf: btf: Support flags for BTF_SET8 sets
>   bpf: btf: Add BTF_KFUNCS_START/END macro pair
>   bpf: treewide: Annotate BPF kfuncs in BTF
> 
>  Documentation/bpf/kfuncs.rst                  |  8 +++----
>  drivers/hid/bpf/hid_bpf_dispatch.c            |  8 +++----
>  fs/verity/measure.c                           |  4 ++--
>  include/linux/btf_ids.h                       | 21 +++++++++++++++----
>  kernel/bpf/btf.c                              |  8 +++++++
>  kernel/bpf/cpumask.c                          |  4 ++--
>  kernel/bpf/helpers.c                          |  8 +++----
>  kernel/bpf/map_iter.c                         |  4 ++--
>  kernel/cgroup/rstat.c                         |  4 ++--
>  kernel/trace/bpf_trace.c                      |  8 +++----
>  net/bpf/test_run.c                            |  8 +++----
>  net/core/filter.c                             | 20 +++++++++---------
>  net/core/xdp.c                                |  4 ++--
>  net/ipv4/bpf_tcp_ca.c                         |  4 ++--
>  net/ipv4/fou_bpf.c                            |  4 ++--
>  net/ipv4/tcp_bbr.c                            |  4 ++--
>  net/ipv4/tcp_cubic.c                          |  4 ++--
>  net/ipv4/tcp_dctcp.c                          |  4 ++--
>  net/netfilter/nf_conntrack_bpf.c              |  4 ++--
>  net/netfilter/nf_nat_bpf.c                    |  4 ++--
>  net/xfrm/xfrm_interface_bpf.c                 |  4 ++--
>  net/xfrm/xfrm_state_bpf.c                     |  4 ++--
>  .../selftests/bpf/bpf_testmod/bpf_testmod.c   |  8 +++----
>  23 files changed, 87 insertions(+), 66 deletions(-)
> 
> -- 
> 2.42.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel




[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux