[PATCH bpf-next v3 3/6] bpf: Preserve boundaries and track scalars on narrowing fill

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Maxim Mikityanskiy <maxim@xxxxxxxxxxxxx>

When the width of a fill is smaller than the width of the preceding
spill, the information about scalar boundaries can still be preserved,
as long as it's coerced to the right width (done by coerce_reg_to_size).
Even further, if the actual value fits into the fill width, the ID can
be preserved as well for further tracking of equal scalars.

Implement the above improvements, which makes narrowing fills behave the
same as narrowing spills and MOVs between registers.

Two tests are adjusted to accommodate for endianness differences and to
take into account that it's now allowed to do a narrowing fill from the
least significant bits.

reg_bounds_sync is added to coerce_reg_to_size to correctly adjust
umin/umax boundaries after the var_off truncation, for example, a 64-bit
value 0xXXXXXXXX00000000, when read as a 32-bit, gets umin = 0, umax =
0xFFFFFFFF, var_off = (0x0; 0xffffffff00000000), which needs to be
synced down to umax = 0, otherwise reg_bounds_sanity_check doesn't pass.

Signed-off-by: Maxim Mikityanskiy <maxim@xxxxxxxxxxxxx>
---
 include/linux/bpf_verifier.h                  |  9 +++++++
 kernel/bpf/verifier.c                         | 15 ++++++++---
 .../selftests/bpf/progs/verifier_spill_fill.c | 26 ++++++++++++++-----
 3 files changed, 39 insertions(+), 11 deletions(-)

diff --git a/include/linux/bpf_verifier.h b/include/linux/bpf_verifier.h
index 7f5816482a10..897be9dd6f12 100644
--- a/include/linux/bpf_verifier.h
+++ b/include/linux/bpf_verifier.h
@@ -918,6 +918,15 @@ static inline void mark_verifier_state_scratched(struct bpf_verifier_env *env)
 	env->scratched_stack_slots = ~0ULL;
 }
 
+static inline bool bpf_stack_narrow_access_ok(int off, int fill_size, int spill_size)
+{
+#ifdef __BIG_ENDIAN
+	off -= spill_size - fill_size;
+#endif
+
+	return !(off % BPF_REG_SIZE);
+}
+
 const char *reg_type_str(struct bpf_verifier_env *env, enum bpf_reg_type type);
 const char *dynptr_type_str(enum bpf_dynptr_type type);
 const char *iter_type_str(const struct btf *btf, u32 btf_id);
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index f4b9fd0006d1..81b08a0e9e2c 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -4778,7 +4778,8 @@ static int check_stack_read_fixed_off(struct bpf_verifier_env *env,
 			if (dst_regno < 0)
 				return 0;
 
-			if (!(off % BPF_REG_SIZE) && size == spill_size) {
+			if (size <= spill_size &&
+			    bpf_stack_narrow_access_ok(off, size, spill_size)) {
 				/* The earlier check_reg_arg() has decided the
 				 * subreg_def for this insn.  Save it first.
 				 */
@@ -4786,6 +4787,12 @@ static int check_stack_read_fixed_off(struct bpf_verifier_env *env,
 
 				copy_register_state(&state->regs[dst_regno], reg);
 				state->regs[dst_regno].subreg_def = subreg_def;
+
+				/* Break the relation on a narrowing fill.
+				 * coerce_reg_to_size will adjust the boundaries.
+				 */
+				if (get_reg_width(reg) > size * BITS_PER_BYTE)
+					state->regs[dst_regno].id = 0;
 			} else {
 				int spill_cnt = 0, zero_cnt = 0;
 
@@ -6061,10 +6068,10 @@ static void coerce_reg_to_size(struct bpf_reg_state *reg, int size)
 	 * values are also truncated so we push 64-bit bounds into
 	 * 32-bit bounds. Above were truncated < 32-bits already.
 	 */
-	if (size < 4) {
+	if (size < 4)
 		__mark_reg32_unbounded(reg);
-		reg_bounds_sync(reg);
-	}
+
+	reg_bounds_sync(reg);
 }
 
 static void set_sext64_default_val(struct bpf_reg_state *reg, int size)
diff --git a/tools/testing/selftests/bpf/progs/verifier_spill_fill.c b/tools/testing/selftests/bpf/progs/verifier_spill_fill.c
index f9803005e1c0..3e5d063ea7e8 100644
--- a/tools/testing/selftests/bpf/progs/verifier_spill_fill.c
+++ b/tools/testing/selftests/bpf/progs/verifier_spill_fill.c
@@ -217,7 +217,7 @@ __naked void uninit_u32_from_the_stack(void)
 
 SEC("tc")
 __description("Spill a u32 const scalar.  Refill as u16.  Offset to skb->data")
-__failure __msg("invalid access to packet")
+__success __retval(0)
 __naked void u16_offset_to_skb_data(void)
 {
 	asm volatile ("					\
@@ -225,13 +225,19 @@ __naked void u16_offset_to_skb_data(void)
 	r3 = *(u32*)(r1 + %[__sk_buff_data_end]);	\
 	w4 = 20;					\
 	*(u32*)(r10 - 8) = r4;				\
-	r4 = *(u16*)(r10 - 8);				\
+	"
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+	"r4 = *(u16*)(r10 - 8);"
+#else
+	"r4 = *(u16*)(r10 - 6);"
+#endif
+	"						\
 	r0 = r2;					\
-	/* r0 += r4 R0=pkt R2=pkt R3=pkt_end R4=umax=65535 */\
+	/* r0 += r4 R0=pkt R2=pkt R3=pkt_end R4=20 */\
 	r0 += r4;					\
-	/* if (r0 > r3) R0=pkt,umax=65535 R2=pkt R3=pkt_end R4=umax=65535 */\
+	/* if (r0 > r3) R0=pkt,off=20 R2=pkt R3=pkt_end R4=20 */\
 	if r0 > r3 goto l0_%=;				\
-	/* r0 = *(u32 *)r2 R0=pkt,umax=65535 R2=pkt R3=pkt_end R4=20 */\
+	/* r0 = *(u32 *)r2 R0=pkt,off=20 R2=pkt R3=pkt_end R4=20 */\
 	r0 = *(u32*)(r2 + 0);				\
 l0_%=:	r0 = 0;						\
 	exit;						\
@@ -268,7 +274,7 @@ l0_%=:	r0 = 0;						\
 }
 
 SEC("tc")
-__description("Spill a u32 const scalar.  Refill as u16 from fp-6.  Offset to skb->data")
+__description("Spill a u32 const scalar.  Refill as u16 from MSB.  Offset to skb->data")
 __failure __msg("invalid access to packet")
 __naked void _6_offset_to_skb_data(void)
 {
@@ -277,7 +283,13 @@ __naked void _6_offset_to_skb_data(void)
 	r3 = *(u32*)(r1 + %[__sk_buff_data_end]);	\
 	w4 = 20;					\
 	*(u32*)(r10 - 8) = r4;				\
-	r4 = *(u16*)(r10 - 6);				\
+	"
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+	"r4 = *(u16*)(r10 - 6);"
+#else
+	"r4 = *(u16*)(r10 - 8);"
+#endif
+	"						\
 	r0 = r2;					\
 	/* r0 += r4 R0=pkt R2=pkt R3=pkt_end R4=umax=65535 */\
 	r0 += r4;					\
-- 
2.43.0





[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux