On 1/9/24 2:38 PM, Andrii Nakryiko wrote:
On Mon, Jan 8, 2024 at 8:05 PM Yonghong Song <yonghong.song@xxxxxxxxx> wrote:
With patch set [1], precision backtracing supports register spill/fill
to/from the stack. The patch [2] allows initial imprecise register spill
with content 0. This is a common case for cpuv3 and lower for
initializing the stack variables with pattern
r1 = 0
*(u64 *)(r10 - 8) = r1
and the [2] has demonstrated good verification improvement.
For cpuv4, the initialization could be
*(u64 *)(r10 - 8) = 0
The current verifier marks the r10-8 contents with STACK_ZERO.
Similar to [2], let us permit the above insn to behave like
imprecise register spill which can reduce number of verified states.
The change is in function check_stack_write_fixed_off().
Before this patch, spilled zero will be marked as STACK_ZERO
which can provide precise values. In check_stack_write_var_off(),
STACK_ZERO will be maintained if writing a const zero
so later it can provide precise values if needed.
The above handling of '*(u64 *)(r10 - 8) = 0' as a spill
will have issues in check_stack_write_var_off() as the spill
will be converted to STACK_MISC and the precise value 0
is lost. To fix this issue, if the spill slots with const
zero and the BPF_ST write also with const zero, the spill slots
are preserved, which can later provide precise values
if needed. Without the change in check_stack_write_var_off(),
the test_verifier subtest 'BPF_ST_MEM stack imm zero, variable offset'
will fail.
I checked cpuv3 and cpuv4 with and without this patch with veristat.
There is no state change for cpuv3 since '*(u64 *)(r10 - 8) = 0'
is only generated with cpuv4.
For cpuv4:
$ ../veristat -C old.cpuv4.csv new.cpuv4.csv -e file,prog,insns,states -f 'insns_diff!=0'
File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF)
------------------------------------------ ------------------- --------- --------- --------------- ---------- ---------- -------------
local_storage_bench.bpf.linked3.o get_local 228 168 -60 (-26.32%) 17 14 -3 (-17.65%)
pyperf600_bpf_loop.bpf.linked3.o on_event 6066 4889 -1177 (-19.40%) 403 321 -82 (-20.35%)
test_cls_redirect.bpf.linked3.o cls_redirect 35483 35387 -96 (-0.27%) 2179 2177 -2 (-0.09%)
test_l4lb_noinline.bpf.linked3.o balancer_ingress 4494 4522 +28 (+0.62%) 217 219 +2 (+0.92%)
test_l4lb_noinline_dynptr.bpf.linked3.o balancer_ingress 1432 1455 +23 (+1.61%) 92 94 +2 (+2.17%)
test_xdp_noinline.bpf.linked3.o balancer_ingress_v6 3462 3458 -4 (-0.12%) 216 216 +0 (+0.00%)
verifier_iterating_callbacks.bpf.linked3.o widening 52 41 -11 (-21.15%) 4 3 -1 (-25.00%)
xdp_synproxy_kern.bpf.linked3.o syncookie_tc 12412 11719 -693 (-5.58%) 345 330 -15 (-4.35%)
xdp_synproxy_kern.bpf.linked3.o syncookie_xdp 12478 11794 -684 (-5.48%) 346 331 -15 (-4.34%)
test_l4lb_noinline and test_l4lb_noinline_dynptr has minor regression, but
pyperf600_bpf_loop and local_storage_bench gets pretty good improvement.
[1] https://lore.kernel.org/all/20231205184248.1502704-1-andrii@xxxxxxxxxx/
[2] https://lore.kernel.org/all/20231205184248.1502704-9-andrii@xxxxxxxxxx/
Cc: Kuniyuki Iwashima <kuniyu@xxxxxxxxxx>
Cc: Martin KaFai Lau <kafai@xxxxxx>
Signed-off-by: Yonghong Song <yonghong.song@xxxxxxxxx>
---
kernel/bpf/verifier.c | 16 ++++++++++++++--
.../selftests/bpf/progs/verifier_spill_fill.c | 16 ++++++++--------
2 files changed, 22 insertions(+), 10 deletions(-)
Changelogs:
v2 -> v3:
- add precision checking to the spilled zero value register in
check_stack_write_var_off().
- check spill slot-by-slot instead of in a bunch within a spi.
v1 -> v2:
- Preserve with-const-zero spill if writing is also zero
in check_stack_write_var_off().
- Add a test with not-8-byte-aligned BPF_ST store.
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index adbf330d364b..54da1045e078 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -4493,7 +4493,7 @@ static int check_stack_write_fixed_off(struct bpf_verifier_env *env,
if (fls64(reg->umax_value) > BITS_PER_BYTE * size)
state->stack[spi].spilled_ptr.id = 0;
} else if (!reg && !(off % BPF_REG_SIZE) && is_bpf_st_mem(insn) &&
- insn->imm != 0 && env->bpf_capable) {
+ env->bpf_capable) {
struct bpf_reg_state fake_reg = {};
__mark_reg_known(&fake_reg, insn->imm);
@@ -4615,6 +4615,7 @@ static int check_stack_write_var_off(struct bpf_verifier_env *env,
/* Variable offset writes destroy any spilled pointers in range. */
for (i = min_off; i < max_off; i++) {
+ struct bpf_reg_state *spill_reg;
u8 new_type, *stype;
int slot, spi;
@@ -4640,7 +4641,18 @@ static int check_stack_write_var_off(struct bpf_verifier_env *env,
return -EINVAL;
}
- /* Erase all spilled pointers. */
+ /* If writing_zero and the the spi slot contains a spill of value 0,
+ * maintain the spill type.
+ */
+ if (writing_zero && is_spilled_scalar_reg(&state->stack[spi])) {
nit: I'd probably move `struct bpf_reg_state *spill_reg;` here to keep it local
other than the missing `*stype == STACK_SPILL` check that Eduard
already called out, looks good to me!
Make sense. Will do!
+ spill_reg = &state->stack[spi].spilled_ptr;
+ if (tnum_is_const(spill_reg->var_off) && spill_reg->var_off.value == 0) {
+ zero_used = true;
+ continue;
+ }
+ }
+
+ /* Erase all other spilled pointers. */
state->stack[spi].spilled_ptr.type = NOT_INIT;
/* Update the slot type. */
[...]
