[PATCH bpf-next v12 1/4] bpf: Relax tracing prog recursive attach rules

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently, it's not allowed to attach an fentry/fexit prog to another
one fentry/fexit. At the same time it's not uncommon to see a tracing
program with lots of logic in use, and the attachment limitation
prevents usage of fentry/fexit for performance analysis (e.g. with
"bpftool prog profile" command) in this case. An example could be
falcosecurity libs project that uses tp_btf tracing programs.

Following the corresponding discussion [1], the reason for that is to
avoid tracing progs call cycles without introducing more complex
solutions. But currently it seems impossible to load and attach tracing
programs in a way that will form such a cycle. The limitation is coming
from the fact that attach_prog_fd is specified at the prog load (thus
making it impossible to attach to a program loaded after it in this
way), as well as tracing progs not implementing link_detach.

Replace "no same type" requirement with verification that no more than
one level of attachment nesting is allowed. In this way only one
fentry/fexit program could be attached to another fentry/fexit to cover
profiling use case, and still no cycle could be formed. To implement,
add a new field into bpf_prog_aux to track nested attachment for tracing
programs.

[1]: https://lore.kernel.org/bpf/20191108064039.2041889-16-ast@xxxxxxxxxx/

Acked-by: Jiri Olsa <olsajiri@xxxxxxxxx>
Acked-by: Song Liu <song@xxxxxxxxxx>
Signed-off-by: Dmitrii Dolgov <9erthalion6@xxxxxxxxx>
---
Previous discussion: https://lore.kernel.org/bpf/20231222151153.31291-1-9erthalion6@xxxxxxxxx/

Changes in v10:
    - Set attach_tracing_prog flag at load time.

Changes in v9:
    - Formatting

Changes in v8:
    - Move bookkeping in bpf_tracing_link_release under the tgt_prog
      condition.
    - Fix some indentation issues.

Changes in v7:
    - Replace attach_depth with a boolean flag to indicate a program is
      already tracing an fentry/fexit.

Changes in v6:
    - Apply nesting level limitation only to tracing programs, otherwise
      it's possible to apply it in "fentry->extension" case and break it

Changes in v5:
    - Remove follower_cnt and drop unreachable cycle prevention condition
    - Allow only one level of attachment nesting
    - Do not display attach_depth in bpftool, as it doesn't make sense
      anymore

Changes in v3:
    - Fix incorrect decreasing of attach_depth, setting to 0 instead
    - Place bookkeeping later, to not miss a cleanup if needed
    - Display attach_depth in bpftool only if the value is not 0

Changes in v2:
    - Verify tgt_prog is not null
    - Replace boolean followed with number of followers, to handle
      multiple progs attaching/detaching

 include/linux/bpf.h   |  1 +
 kernel/bpf/syscall.c  | 23 ++++++++++++++++++++++-
 kernel/bpf/verifier.c | 39 +++++++++++++++++++++++++--------------
 3 files changed, 48 insertions(+), 15 deletions(-)

diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index eb447b0a9423..e7393674ab94 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -1414,6 +1414,7 @@ struct bpf_prog_aux {
 	bool dev_bound; /* Program is bound to the netdev. */
 	bool offload_requested; /* Program is bound and offloaded to the netdev. */
 	bool attach_btf_trace; /* true if attaching to BTF-enabled raw tp */
+	bool attach_tracing_prog; /* true if tracing another tracing program */
 	bool func_proto_unreliable;
 	bool sleepable;
 	bool tail_call_reachable;
diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index 5e43ddd1b83f..c40cad8886e9 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -2702,6 +2702,22 @@ static int bpf_prog_load(union bpf_attr *attr, bpfptr_t uattr, u32 uattr_size)
 			goto free_prog_sec;
 	}
 
+	/*
+	 * Bookkeeping for managing the program attachment chain.
+	 *
+	 * It might be tempting to set attach_tracing_prog flag at the attachment
+	 * time, but this will not prevent from loading bunch of tracing prog
+	 * first, then attach them one to another.
+	 *
+	 * The flag attach_tracing_prog is set for the whole program lifecycle, and
+	 * doesn't have to be cleared in bpf_tracing_link_release, since tracing
+	 * programs cannot change attachment target.
+	 */
+	if (type == BPF_PROG_TYPE_TRACING && dst_prog &&
+	    dst_prog->type == BPF_PROG_TYPE_TRACING) {
+		prog->aux->attach_tracing_prog = true;
+	}
+
 	/* find program type: socket_filter vs tracing_filter */
 	err = find_prog_type(type, prog);
 	if (err < 0)
@@ -3135,7 +3151,12 @@ static int bpf_tracing_prog_attach(struct bpf_prog *prog,
 	}
 
 	if (tgt_prog_fd) {
-		/* For now we only allow new targets for BPF_PROG_TYPE_EXT */
+		/*
+		 * For now we only allow new targets for BPF_PROG_TYPE_EXT. If this
+		 * part would be changed to implement the same for
+		 * BPF_PROG_TYPE_TRACING, do not forget to update the way how
+		 * attach_tracing_prog flag is set.
+		 */
 		if (prog->type != BPF_PROG_TYPE_EXT) {
 			err = -EINVAL;
 			goto out_put_prog;
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 8e7b6072e3f4..f8c15ce8fd05 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -20077,6 +20077,7 @@ int bpf_check_attach_target(struct bpf_verifier_log *log,
 			    struct bpf_attach_target_info *tgt_info)
 {
 	bool prog_extension = prog->type == BPF_PROG_TYPE_EXT;
+	bool prog_tracing = prog->type == BPF_PROG_TYPE_TRACING;
 	const char prefix[] = "btf_trace_";
 	int ret = 0, subprog = -1, i;
 	const struct btf_type *t;
@@ -20147,10 +20148,21 @@ int bpf_check_attach_target(struct bpf_verifier_log *log,
 			bpf_log(log, "Can attach to only JITed progs\n");
 			return -EINVAL;
 		}
-		if (tgt_prog->type == prog->type) {
-			/* Cannot fentry/fexit another fentry/fexit program.
-			 * Cannot attach program extension to another extension.
-			 * It's ok to attach fentry/fexit to extension program.
+		if (prog_tracing) {
+			if (aux->attach_tracing_prog) {
+				/*
+				 * Target program is an fentry/fexit which is already attached
+				 * to another tracing program. More levels of nesting
+				 * attachment are not allowed.
+				 */
+				bpf_log(log, "Cannot nest tracing program attach more than once\n");
+				return -EINVAL;
+			}
+		} else if (tgt_prog->type == prog->type) {
+			/*
+			 * To avoid potential call chain cycles, prevent attaching of a
+			 * program extension to another extension. It's ok to attach
+			 * fentry/fexit to extension program.
 			 */
 			bpf_log(log, "Cannot recursively attach\n");
 			return -EINVAL;
@@ -20163,16 +20175,15 @@ int bpf_check_attach_target(struct bpf_verifier_log *log,
 			 * except fentry/fexit. The reason is the following.
 			 * The fentry/fexit programs are used for performance
 			 * analysis, stats and can be attached to any program
-			 * type except themselves. When extension program is
-			 * replacing XDP function it is necessary to allow
-			 * performance analysis of all functions. Both original
-			 * XDP program and its program extension. Hence
-			 * attaching fentry/fexit to BPF_PROG_TYPE_EXT is
-			 * allowed. If extending of fentry/fexit was allowed it
-			 * would be possible to create long call chain
-			 * fentry->extension->fentry->extension beyond
-			 * reasonable stack size. Hence extending fentry is not
-			 * allowed.
+			 * type. When extension program is replacing XDP function
+			 * it is necessary to allow performance analysis of all
+			 * functions. Both original XDP program and its program
+			 * extension. Hence attaching fentry/fexit to
+			 * BPF_PROG_TYPE_EXT is allowed. If extending of
+			 * fentry/fexit was allowed it would be possible to create
+			 * long call chain fentry->extension->fentry->extension
+			 * beyond reasonable stack size. Hence extending fentry
+			 * is not allowed.
 			 */
 			bpf_log(log, "Cannot extend fentry/fexit\n");
 			return -EINVAL;
-- 
2.41.0





[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux