On Wednesday, January 3, 2024 7:47 AM, John Fastabend <john.fastabend@xxxxxxxxx> wrote:
>Song Yoong Siang wrote:
>> This patch adds support to per-packet Tx hardware timestamp request to
>> AF_XDP zero-copy packet via XDP Tx metadata framework. Please note that
>> user needs to enable Tx HW timestamp capability via igc_ioctl() with
>> SIOCSHWTSTAMP cmd before sending xsk Tx timestamp request.
>>
>> Same as implementation in RX timestamp XDP hints kfunc metadata, Timer 0
>> (adjustable clock) is used in xsk Tx hardware timestamp. i225/i226 have
>> four sets of timestamping registers. A pointer named "xsk_pending_ts"
>> is introduced to indicate the timestamping register is already occupied.
>> Furthermore, the mentioned pointer also being used to hold the transmit
>> completion until the tx hardware timestamp is ready. This is because for
>> i225/i226, the timestamp notification comes some time after the transmit
>> completion event. The driver will retrigger hardware irq to clean the
>> packet after retrieve the tx hardware timestamp.
>>
>> Besides, a pointer named "xsk_meta" is added into igc_tx_timestamp_request
>> structure as a hook to the metadata location of the transmit packet. When
>> a Tx timestamp interrupt happens, the interrupt handler will copy the
>> value of Tx timestamp into metadata via xsk_tx_metadata_complete().
>>
>> This patch is tested with tools/testing/selftests/bpf/xdp_hw_metadata
>> on Intel ADL-S platform. Below are the test steps and results.
>>
>> Command on DUT:
>> sudo ./xdp_hw_metadata <interface name>
>> sudo hwstamp_ctl -i <interface name> -t 1 -r 1
>> sudo ./testptp -d /dev/ptp0 -s
>>
>> Command on Link Partner:
>> echo -n xdp | nc -u -q1 <destination IPv4 addr> 9091
>>
>> Result:
>> xsk_ring_cons__peek: 1
>> 0x555b112ae958: rx_desc[6]->addr=86110 addr=86110 comp_addr=86110 EoP
>> rx_hash: 0xBFDEC36E with RSS type:0x1
>> HW RX-time: 1677762429190040955 (sec:1677762429.1900) delta to User RX-time
>sec:0.0001 (100.124 usec)
>> XDP RX-time: 1677762429190123163 (sec:1677762429.1901) delta to User RX-time
>sec:0.0000 (17.916 usec)
>> 0x555b112ae958: ping-pong with csum=404e (want c59e) csum_start=34
>csum_offset=6
>> 0x555b112ae958: complete tx idx=6 addr=6010
>> HW TX-complete-time: 1677762429190173323 (sec:1677762429.1902) delta to
>User TX-complete-time sec:0.0100 (10035.884 usec)
>> XDP RX-time: 1677762429190123163 (sec:1677762429.1901) delta to User TX-
>complete-time sec:0.0101 (10086.044 usec)
>> HW RX-time: 1677762429190040955 (sec:1677762429.1900) delta to HW TX-
>complete-time sec:0.0001 (132.368 usec)
>> 0x555b112ae958: complete rx idx=134 addr=86110
>
>Curious was there any benchmarks run with and without this enabled?
>
Hi John,
Thanks for your comments.
There are similar request from Vinicius about performance impact by this patch.
xdp_hw_metadata app is not suitable for such benchmark test.
I will try to search for other suitable app and perform some bandwidth test
with and without XDP ZC hw timestamp.
>>
>> Signed-off-by: Song Yoong Siang <yoong.siang.song@xxxxxxxxx>
>> ---
>> drivers/net/ethernet/intel/igc/igc.h | 15 ++++
>> drivers/net/ethernet/intel/igc/igc_main.c | 88 ++++++++++++++++++++++-
>> drivers/net/ethernet/intel/igc/igc_ptp.c | 42 ++++++++---
>> 3 files changed, 134 insertions(+), 11 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/intel/igc/igc.h b/drivers/net/ethernet/intel/igc/igc.h
>> index ac7c861e83a0..c831dde01662 100644
>> --- a/drivers/net/ethernet/intel/igc/igc.h
>> +++ b/drivers/net/ethernet/intel/igc/igc.h
>> @@ -79,6 +79,9 @@ struct igc_tx_timestamp_request {
>> u32 regl; /* which TXSTMPL_{X} register should be used */
>> u32 regh; /* which TXSTMPH_{X} register should be used */
>> u32 flags; /* flags that should be added to the tx_buffer */
>> + u8 xsk_queue_index; /* Tx queue which requesting timestamp */
>> + bool *xsk_pending_ts; /* ref to tx ring for waiting timestamp event */
>
>Is it really necessary to use a ref to a bool here if feels a
>bit odd to me? Is this just to block the tx completion on the timestamp?
>
Yes, it is used to block the tx completion.
I create bool pointer as a "hook" between timestamp event and tx completion event.
Since this is odd, I will take suggestion from Vinicius, which use
tx_buffer pointer as "hook". Is this sound better?
>> + struct xsk_tx_metadata_compl xsk_meta; /* ref to xsk Tx metadata */
>> };
>>
>> struct igc_inline_rx_tstamps {
>> @@ -319,6 +322,9 @@ void igc_disable_tx_ring(struct igc_ring *ring);
>> void igc_enable_tx_ring(struct igc_ring *ring);
>> int igc_xsk_wakeup(struct net_device *dev, u32 queue_id, u32 flags);
>>
>> +/* AF_XDP TX metadata operations */
>> +extern const struct xsk_tx_metadata_ops igc_xsk_tx_metadata_ops;
>> +
>> /* igc_dump declarations */
>> void igc_rings_dump(struct igc_adapter *adapter);
>> void igc_regs_dump(struct igc_adapter *adapter);
>> @@ -528,6 +534,7 @@ struct igc_tx_buffer {
>> DEFINE_DMA_UNMAP_ADDR(dma);
>> DEFINE_DMA_UNMAP_LEN(len);
>> u32 tx_flags;
>> + bool xsk_pending_ts;
>> };
>>
>> struct igc_rx_buffer {
>> @@ -553,6 +560,14 @@ struct igc_xdp_buff {
>> struct igc_inline_rx_tstamps *rx_ts; /* data indication bit
>IGC_RXDADV_STAT_TSIP */
>> };
>>
>> +struct igc_metadata_request {
>> + struct xsk_tx_metadata *meta;
>> + struct igc_adapter *adapter;
>> + struct igc_ring *tx_ring;
>> + bool *xsk_pending_ts;
>> + u32 *cmd_type;
>> +};
>> +
>> struct igc_q_vector {
>> struct igc_adapter *adapter; /* backlink */
>> void __iomem *itr_register;
>> diff --git a/drivers/net/ethernet/intel/igc/igc_main.c
>b/drivers/net/ethernet/intel/igc/igc_main.c
>> index 61db1d3bfa0b..311c85f2d82d 100644
>> --- a/drivers/net/ethernet/intel/igc/igc_main.c
>> +++ b/drivers/net/ethernet/intel/igc/igc_main.c
>> @@ -1553,7 +1553,7 @@ static bool igc_request_tx_tstamp(struct igc_adapter
>*adapter, struct sk_buff *s
>> for (i = 0; i < IGC_MAX_TX_TSTAMP_REGS; i++) {
>> struct igc_tx_timestamp_request *tstamp = &adapter->tx_tstamp[i];
>>
>> - if (tstamp->skb)
>> + if (tstamp->skb || tstamp->xsk_pending_ts)
>> continue;
>>
>> tstamp->skb = skb_get(skb);
>> @@ -2878,6 +2878,71 @@ static void igc_update_tx_stats(struct igc_q_vector
>*q_vector,
>> q_vector->tx.total_packets += packets;
>
>[...]
>
>> +static u64 igc_xsk_fill_timestamp(void *_priv)
>> +{
>> + return *(u64 *)_priv;
>> +}
>> +
>> +const struct xsk_tx_metadata_ops igc_xsk_tx_metadata_ops = {
>> + .tmo_request_timestamp = igc_xsk_request_timestamp,
>> + .tmo_fill_timestamp = igc_xsk_fill_timestamp,
>> +};
>> +
>> static void igc_xdp_xmit_zc(struct igc_ring *ring)
>> {
>> struct xsk_buff_pool *pool = ring->xsk_pool;
>> @@ -2899,6 +2964,8 @@ static void igc_xdp_xmit_zc(struct igc_ring *ring)
>> budget = igc_desc_unused(ring);
>>
>> while (xsk_tx_peek_desc(pool, &xdp_desc) && budget--) {
>> + struct igc_metadata_request meta_req;
>> + struct xsk_tx_metadata *meta = NULL;
>> u32 cmd_type, olinfo_status;
>> struct igc_tx_buffer *bi;
>> dma_addr_t dma;
>> @@ -2909,14 +2976,23 @@ static void igc_xdp_xmit_zc(struct igc_ring *ring)
>> olinfo_status = xdp_desc.len << IGC_ADVTXD_PAYLEN_SHIFT;
>>
>> dma = xsk_buff_raw_get_dma(pool, xdp_desc.addr);
>> + meta = xsk_buff_get_metadata(pool, xdp_desc.addr);
>> xsk_buff_raw_dma_sync_for_device(pool, dma, xdp_desc.len);
>> + bi = &ring->tx_buffer_info[ntu];
>> +
>> + meta_req.adapter = netdev_priv(ring->netdev);
>> + meta_req.tx_ring = ring;
>> + meta_req.meta = meta;
>> + meta_req.cmd_type = &cmd_type;
>> + meta_req.xsk_pending_ts = &bi->xsk_pending_ts;
>> + xsk_tx_metadata_request(meta, &igc_xsk_tx_metadata_ops,
>> + &meta_req);
>>
>> tx_desc = IGC_TX_DESC(ring, ntu);
>> tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type);
>> tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
>> tx_desc->read.buffer_addr = cpu_to_le64(dma);
>>
>> - bi = &ring->tx_buffer_info[ntu];
>> bi->type = IGC_TX_BUFFER_TYPE_XSK;
>> bi->protocol = 0;
>> bi->bytecount = xdp_desc.len;
>> @@ -2979,6 +3055,13 @@ static bool igc_clean_tx_irq(struct igc_q_vector
>*q_vector, int napi_budget)
>> if (!(eop_desc->wb.status & cpu_to_le32(IGC_TXD_STAT_DD)))
>> break;
>>
>> + /* Hold the completions while there's a pending tx hardware
>> + * timestamp request from XDP Tx metadata.
>> + */
>> + if (tx_buffer->type == IGC_TX_BUFFER_TYPE_XSK &&
>> + tx_buffer->xsk_pending_ts)
>> + break;
>> +
>> /* clear next_to_watch to prevent false hangs */
>> tx_buffer->next_to_watch = NULL;
>>
>> @@ -6819,6 +6902,7 @@ static int igc_probe(struct pci_dev *pdev,
>>
>> netdev->netdev_ops = &igc_netdev_ops;
>> netdev->xdp_metadata_ops = &igc_xdp_metadata_ops;
>> + netdev->xsk_tx_metadata_ops = &igc_xsk_tx_metadata_ops;
>> igc_ethtool_set_ops(netdev);
>> netdev->watchdog_timeo = 5 * HZ;
>>
>> diff --git a/drivers/net/ethernet/intel/igc/igc_ptp.c
>b/drivers/net/ethernet/intel/igc/igc_ptp.c
>> index 885faaa7b9de..b722bca40309 100644
>> --- a/drivers/net/ethernet/intel/igc/igc_ptp.c
>> +++ b/drivers/net/ethernet/intel/igc/igc_ptp.c
>> @@ -11,6 +11,7 @@
>> #include <linux/ktime.h>
>> #include <linux/delay.h>
>> #include <linux/iopoll.h>
>> +#include <net/xdp_sock.h>
>>
>> #define INCVALUE_MASK 0x7fffffff
>> #define ISGN 0x80000000
>> @@ -555,8 +556,15 @@ static void igc_ptp_clear_tx_tstamp(struct igc_adapter
>*adapter)
>> for (i = 0; i < IGC_MAX_TX_TSTAMP_REGS; i++) {
>> struct igc_tx_timestamp_request *tstamp = &adapter->tx_tstamp[i];
>>
>> - dev_kfree_skb_any(tstamp->skb);
>> - tstamp->skb = NULL;
>> + if (tstamp->skb) {
>> + dev_kfree_skb_any(tstamp->skb);
>> + tstamp->skb = NULL;
>> + } else if (tstamp->xsk_pending_ts) {
>> + *tstamp->xsk_pending_ts = false;
>> + tstamp->xsk_pending_ts = NULL;
>
>If we really need this maybe a helper with set_tstamp and clear
>tstamp would be nice? But they seem to come in pairs its either
>false and NULL or true and set.
>
Sure, I can try to create set/clear helper so that the code is clearer.
>> + igc_xsk_wakeup(adapter->netdev, tstamp->xsk_queue_index,
>> + 0);
>> + }
>> }
>>
>> spin_unlock_irqrestore(&adapter->ptp_tx_lock, flags);
>> @@ -657,8 +665,15 @@ static int igc_ptp_set_timestamp_mode(struct igc_adapter
>*adapter,
>
>Thanks,
>John
Thanks & Regards
Siang
