On 12/20/23 11:10 AM, Martin KaFai Lau wrote:
Good catch. It will unnecessary skip in the following batch/bucket if there is
changes in the current batch/bucket.
From looking at the loop again, I think it is better not to change the
iter->offset during the for loop. Only update iter->offset after the for loop
has concluded.
The non-zero iter->offset is only useful for the first bucket, so does a test on
the first bucket (state->bucket == bucket) before skipping sockets. Something
like this:
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 89e5a806b82e..a993f364d6ae 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -3139,6 +3139,7 @@ static struct sock *bpf_iter_udp_batch(struct seq_file *seq)
struct net *net = seq_file_net(seq);
struct udp_table *udptable;
unsigned int batch_sks = 0;
+ int bucket, bucket_offset;
bool resized = false;
struct sock *sk;
@@ -3162,14 +3163,14 @@ static struct sock *bpf_iter_udp_batch(struct seq_file
*seq)
iter->end_sk = 0;
iter->st_bucket_done = false;
batch_sks = 0;
+ bucket = state->bucket;
+ bucket_offset = 0;
for (; state->bucket <= udptable->mask; state->bucket++) {
struct udp_hslot *hslot2 = &udptable->hash2[state->bucket];
- if (hlist_empty(&hslot2->head)) {
- iter->offset = 0;
+ if (hlist_empty(&hslot2->head))
continue;
- }
spin_lock_bh(&hslot2->lock);
udp_portaddr_for_each_entry(sk, &hslot2->head) {
@@ -3177,8 +3178,9 @@ static struct sock *bpf_iter_udp_batch(struct seq_file *seq)
/* Resume from the last iterated socket at the
* offset in the bucket before iterator was stopped.
*/
- if (iter->offset) {
- --iter->offset;
+ if (state->bucket == bucket &&
+ bucket_offset < iter->offset) {
+ ++bucket_offset;
continue;
}
if (iter->end_sk < iter->max_sk) {
@@ -3192,10 +3194,10 @@ static struct sock *bpf_iter_udp_batch(struct seq_file
*seq)
if (iter->end_sk)
break;
+ }
- /* Reset the current bucket's offset before moving to the next bucket. */
+ if (state->bucket != bucket)
iter->offset = 0;
- }
/* All done: no batch made. */
if (!iter->end_sk)
I think I found another bug in the current bpf_iter_udp_batch(). The
"state->bucket--;" at the end of the batch() function is wrong also. It does not
need to go back to the previous bucket. After realloc with a larger batch array,
it should retry on the "state->bucket" as is. I tried to force the bind() to use
bucket 0 and bind a larger so_reuseport set (24 sockets). WARN_ON(state->bucket
< 0) triggered.
Going back to this bug (backward progress on --iter->offset), I think it is a
bit cleaner to always reset iter->offset to 0 and advance iter->offset to the
resume_offset only when needed. Something like this:
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 89e5a806b82e..184aa966a006 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -3137,16 +3137,18 @@ static struct sock *bpf_iter_udp_batch(struct seq_file *seq)
struct bpf_udp_iter_state *iter = seq->private;
struct udp_iter_state *state = &iter->state;
struct net *net = seq_file_net(seq);
+ int resume_bucket, resume_offset;
struct udp_table *udptable;
unsigned int batch_sks = 0;
bool resized = false;
struct sock *sk;
+ resume_bucket = state->bucket;
+ resume_offset = iter->offset;
+
/* The current batch is done, so advance the bucket. */
- if (iter->st_bucket_done) {
+ if (iter->st_bucket_done)
state->bucket++;
- iter->offset = 0;
- }
udptable = udp_get_table_seq(seq, net);
@@ -3166,10 +3168,9 @@ static struct sock *bpf_iter_udp_batch(struct seq_file *seq)
for (; state->bucket <= udptable->mask; state->bucket++) {
struct udp_hslot *hslot2 = &udptable->hash2[state->bucket];
- if (hlist_empty(&hslot2->head)) {
- iter->offset = 0;
+ iter->offset = 0;
+ if (hlist_empty(&hslot2->head))
continue;
- }
spin_lock_bh(&hslot2->lock);
udp_portaddr_for_each_entry(sk, &hslot2->head) {
@@ -3177,8 +3178,9 @@ static struct sock *bpf_iter_udp_batch(struct seq_file *seq)
/* Resume from the last iterated socket at the
* offset in the bucket before iterator was stopped.
*/
- if (iter->offset) {
- --iter->offset;
+ if (state->bucket == resume_bucket &&
+ iter->offset < resume_offset) {
+ ++iter->offset;
continue;
}
if (iter->end_sk < iter->max_sk) {
@@ -3192,9 +3194,6 @@ static struct sock *bpf_iter_udp_batch(struct seq_file *seq)
if (iter->end_sk)
break;
-
- /* Reset the current bucket's offset before moving to the next bucket. */
- iter->offset = 0;
}
/* All done: no batch made. */
@@ -3210,10 +3209,6 @@ static struct sock *bpf_iter_udp_batch(struct seq_file *seq)
}
if (!resized && !bpf_iter_udp_realloc_batch(iter, batch_sks * 3 / 2)) {
resized = true;
- /* After allocating a larger batch, retry one more time to grab
- * the whole bucket.
- */
- state->bucket--;
goto again;
}
done:
