[PATCH bpf-next v9 2/4] selftests/bpf: Add test for recursive attachment of tracing progs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Verify the fact that only one fentry prog could be attached to another
fentry, building up an attachment chain of limited size. Use existing
bpf_testmod as a start of the chain.

Signed-off-by: Dmitrii Dolgov <9erthalion6@xxxxxxxxx>
---
Changes in v8:
    - Cleanup test bpf progs and the content of first/second condition
      in the loop.

Changes in v5:
    - Test only one level of attachment

 .../bpf/prog_tests/recursive_attach.c         | 68 +++++++++++++++++++
 .../selftests/bpf/progs/fentry_recursive.c    | 16 +++++
 .../bpf/progs/fentry_recursive_target.c       | 17 +++++
 3 files changed, 101 insertions(+)
 create mode 100644 tools/testing/selftests/bpf/prog_tests/recursive_attach.c
 create mode 100644 tools/testing/selftests/bpf/progs/fentry_recursive.c
 create mode 100644 tools/testing/selftests/bpf/progs/fentry_recursive_target.c

diff --git a/tools/testing/selftests/bpf/prog_tests/recursive_attach.c b/tools/testing/selftests/bpf/prog_tests/recursive_attach.c
new file mode 100644
index 000000000000..5b38783bcd16
--- /dev/null
+++ b/tools/testing/selftests/bpf/prog_tests/recursive_attach.c
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2023 Red Hat, Inc. */
+#include <test_progs.h>
+#include "fentry_recursive.skel.h"
+#include "fentry_recursive_target.skel.h"
+#include <bpf/btf.h>
+#include "bpf/libbpf_internal.h"
+
+/*
+ * Test following scenarios:
+ * - attach one fentry progs to another one
+ * - more than one nesting levels are not allowed
+ */
+void test_recursive_fentry_attach(void)
+{
+	struct fentry_recursive_target *target_skel = NULL;
+	struct fentry_recursive *tracing_chain[2] = {};
+	struct bpf_program *prog;
+	int prev_fd, err;
+
+	target_skel = fentry_recursive_target__open_and_load();
+	if (!ASSERT_OK_PTR(target_skel, "fentry_recursive_target__open_and_load"))
+		goto close_prog;
+
+	/* Create an attachment chain with two fentry progs */
+	for (int i = 0; i < 2; i++) {
+		tracing_chain[i] = fentry_recursive__open();
+		if (!ASSERT_OK_PTR(tracing_chain[i], "fentry_recursive__open"))
+			goto close_prog;
+
+		/*
+		 * The first prog in the chain is going to be attached to the target
+		 * fentry program, the second one to the previous in the chain.
+		 */
+		prog = tracing_chain[i]->progs.recursive_attach;
+		if (i == 0) {
+			prev_fd = bpf_program__fd(target_skel->progs.test1);
+			err = bpf_program__set_attach_target(prog, prev_fd, "test1");
+		} else {
+			prev_fd = bpf_program__fd(tracing_chain[i-1]->progs.recursive_attach);
+			err = bpf_program__set_attach_target(prog, prev_fd, "recursive_attach");
+		}
+
+		if (!ASSERT_OK(err, "bpf_program__set_attach_target"))
+			goto close_prog;
+
+		err = fentry_recursive__load(tracing_chain[i]);
+		/* The first attach should succeed, the second fail */
+		if (i == 0) {
+			if (!ASSERT_OK(err, "fentry_recursive__load"))
+				goto close_prog;
+
+			err = fentry_recursive__attach(tracing_chain[i]);
+			if (!ASSERT_OK(err, "fentry_recursive__attach"))
+				goto close_prog;
+		} else {
+			if (!ASSERT_ERR(err, "fentry_recursive__load"))
+				goto close_prog;
+		}
+	}
+
+close_prog:
+	fentry_recursive_target__destroy(target_skel);
+	for (int i = 0; i < 2; i++) {
+		if (tracing_chain[i])
+			fentry_recursive__destroy(tracing_chain[i]);
+	}
+}
diff --git a/tools/testing/selftests/bpf/progs/fentry_recursive.c b/tools/testing/selftests/bpf/progs/fentry_recursive.c
new file mode 100644
index 000000000000..b9e4d35ac597
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/fentry_recursive.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2023 Red Hat, Inc. */
+#include <linux/bpf.h>
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_tracing.h>
+
+char _license[] SEC("license") = "GPL";
+
+/*
+ * Dummy fentry bpf prog for testing fentry attachment chains
+ */
+SEC("fentry/XXX")
+int BPF_PROG(recursive_attach, int a)
+{
+	return 0;
+}
diff --git a/tools/testing/selftests/bpf/progs/fentry_recursive_target.c b/tools/testing/selftests/bpf/progs/fentry_recursive_target.c
new file mode 100644
index 000000000000..6e0b5c716f8e
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/fentry_recursive_target.c
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2023 Red Hat, Inc. */
+#include <linux/bpf.h>
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_tracing.h>
+
+char _license[] SEC("license") = "GPL";
+
+/*
+ * Dummy fentry bpf prog for testing fentry attachment chains. It's going to be
+ * a start of the chain.
+ */
+SEC("fentry/bpf_testmod_fentry_test1")
+int BPF_PROG(test1, int a)
+{
+	return 0;
+}
-- 
2.41.0





[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux