This patch set adds the ability to use unaligned chunks in the XDP umem.
Currently, all chunk addresses passed to the umem are masked to be chunk
size aligned (default is 2k, max is PAGE_SIZE). This limits where we can
place chunks within the umem as well as limiting the packet sizes that are
supported.
The changes in this patch set removes these restrictions, allowing XDP to
be more flexible in where it can place a chunk within a umem. By relaxing
where the chunks can be placed, it allows us to use an arbitrary buffer
size and place that wherever we have a free address in the umem. These
changes add the ability to support arbitrary frame sizes up to 4k
(PAGE_SIZE) and make it easy to integrate with other existing frameworks
that have their own memory management systems, such as DPDK.
Since we are now dealing with arbitrary frame sizes, we need also need to
update how we pass around addresses. Currently, the addresses can simply be
masked to 2k to get back to the original address. This becomes less trivial
when using frame sizes that are not a 'power of 2' size. This patch set
modifies the Rx/Tx descriptor format to use the upper 16-bits of the addr
field for an offset value, leaving the lower 48-bits for the address (this
leaves us with 256 Terabytes, which should be enough!). We only need to use
the upper 16-bits to store the offset when running in unaligned mode.
Rather than adding the offset (headroom etc) to the address, we will store
it in the upper 16-bits of the address field. This way, we can easily add
the offset to the address where we need it, using some bit manipulation and
addition, and we can also easily get the original address wherever we need
it (for example in i40e_zca_free) by simply masking to get the lower
48-bits of the address field.
The numbers below were recorded with the following set up:
- Intel(R) Xeon(R) Gold 6140 CPU @ 2.30GHz
- Intel Corporation Ethernet Controller XXV710 for 25GbE SFP28 (rev 02)
- Driver: i40e
- Application: xdpsock with l2fwd (single interface)
These are solely for comparing performance with and without the patches.
The largest drop was ~1% (in zero-copy mode).
+-------------------------+------------+-----------------+-------------+
| Buffer size: 2048 | SKB mode | Zero-copy | Copy |
+-------------------------+------------+-----------------+-------------+
| Aligned (baseline) | 1.7 Mpps | 15.3 Mpps | 2.08 Mpps |
+-------------------------+------------+-----------------+-------------+
| Aligned (with patches) | 1.7 Mpps | 15.1 Mpps | 2.08 Mpps |
+-------------------------+------------+-----------------+-------------+
| Unaligned | 1.7 Mpps | 14.5 Mpps | 2.08 Mpps |
+-------------------------+------------+-----------------+-------------+
NOTE: We are currently working on the changes required in the Mellanox
driver. We will include these in the v3.
Structure of the patchset:
Patch 1:
- Remove unnecessary masking and headroom addition during zero-copy Rx
buffer recycling in i40e. This change is required in order for the
buffer recycling to work in the unaligned chunk mode.
Patch 2:
- Remove unnecessary masking and headroom addition during
zero-copy Rx buffer recycling in ixgbe. This change is required in
order for the buffer recycling to work in the unaligned chunk mode.
Patch 3:
- Add infrastructure for unaligned chunks. Since we are dealing with
unaligned chunks that could potentially cross a physical page boundary,
we add checks to keep track of that information. We can later use this
information to correctly handle buffers that are placed at an address
where they cross a page boundary. This patch also modifies the
existing Rx and Tx functions to use the new descriptor format. To
handle addresses correctly, we need to mask appropriately based on
whether we are in aligned or unaligned mode.
Patch 4:
- This patch updates the i40e driver to make use of the new descriptor
format. The new format is particularly useful here since we can now
retrieve the original address in places like i40e_zca_free with ease.
This saves us doing various calculations to get the original address
back.
Patch 5:
- This patch updates the ixgbe driver to make use of the new descriptor
format. The new format is particularly useful here since we can now
retrieve the original address in places like ixgbe_zca_free with ease.
This saves us doing various calculations to get the original address
back.
Patch 6:
- Add flags for umem configuration to libbpf
Patch 7:
- Modify xdpsock application to add a command line option for
unaligned chunks
Patch 8:
- Since we can now run the application in unaligned chunk mode, we need
to make sure we recycle the buffers appropriately.
Patch 9:
- Adds hugepage support to the xdpsock application
Patch 10:
- Documentation update to include the unaligned chunk scenario. We need
to explicitly state that the incoming addresses are only masked in the
aligned chunk mode and not the unaligned chunk mode.
---
v2:
- fixed checkpatch issues
- fixed Rx buffer recycling for unaligned chunks in xdpsock
- removed unused defines
- fixed how chunk_size is calculated in xsk_diag.c
- added some performance numbers to cover letter
- modified descriptor format to make it easier to retrieve original
address
- removed patch adding off_t off to the zero copy allocator. This is no
longer needed with the new descriptor format.
Kevin Laatz (10):
i40e: simplify Rx buffer recycle
ixgbe: simplify Rx buffer recycle
xsk: add support to allow unaligned chunk placement
i40e: modify driver for handling offsets
ixgbe: modify driver for handling offsets
libbpf: add flags to umem config
samples/bpf: add unaligned chunks mode support to xdpsock
samples/bpf: add buffer recycling for unaligned chunks to xdpsock
samples/bpf: use hugepages in xdpsock app
doc/af_xdp: include unaligned chunk case
Documentation/networking/af_xdp.rst | 10 ++-
drivers/net/ethernet/intel/i40e/i40e_xsk.c | 39 +++++----
drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c | 39 +++++----
include/net/xdp_sock.h | 2 +
include/uapi/linux/if_xdp.h | 9 ++
net/xdp/xdp_umem.c | 17 ++--
net/xdp/xsk.c | 89 ++++++++++++++++----
net/xdp/xsk_diag.c | 2 +-
net/xdp/xsk_queue.h | 70 +++++++++++++--
samples/bpf/xdpsock_user.c | 61 ++++++++++----
tools/include/uapi/linux/if_xdp.h | 4 +
tools/lib/bpf/xsk.c | 3 +
tools/lib/bpf/xsk.h | 2 +
13 files changed, 266 insertions(+), 81 deletions(-)
--
2.17.1
