Hello, To check if the the pcspkr driver is included in your running kernel, type: zgrep -i pcspkr /proc/config.gz Output here (Slint64-14.2.1.2): CONFIG_HAVE_PCSPKR_PLATFORM=y CONFIG_PCSPKR_PLATFORM=y CONFIG_INPUT_PCSPKR=m If instead the last line is; CONFIG_INPUT_PCSPKR=n you will need another kernel or reconfigure it. PCSPKR is under drivers/input/mis in the kernel tree Else you just need to type as root: modprobe pcspkr lo load the module. This issue is not related to your sound card and ac97, as the beep comes from the internal speaker attached to the mother board, not from a sound card. Didier Spaier Slint maintainer Le 23/10/2020 à 15:15, Linux for blind general discussion a écrit : > I have an ac97 sound card and a c-media usb sound card on a system. I > have only had success activating the pcspeaker when building a kernel for > gentoo. I have no clue as to what to enable to get this done. This is > even after having gone through lspci output and lsmod output with the > install-minimal dvd running the operating system The speaker-test utility > puts out sound in the chroot environment and is silent after first boot > into the new environment made by the compiled kernel. _______________________________________________ Blinux-list mailing list Blinux-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/blinux-list