Tim here again. Talking to Devin, it does at least require an addressable terminal connected to the serial port. https://twitter.com/freebsdfrau/status/1072915779476107264 This could either be another computer via a null modem cable, or if you have a hardware TTS/Braille terminal that is usable in some sort of VT100 emulation, then it should be doable. Otherwise, I suspect that the dialog(1) interface for the installer may be a bit annoying over a dumb-terminal serial link. -tim On December 12, 2018, Linux for blind general discussion wrote: > Tim here. It depends on the hardware you have. It can be booted with > a serial console, so if you have a Braille terminal or hardware that > presents as a serial port, you can make a modified installer image > that will do the entire install over the serial port as described > here > > https://forums.freebsd.org/threads/installing-freebsd-over-serial-console.62005/ > > I've asked Devin Teske (the maintainer of the installer) whether the > entire installer is TUI/curses-based or if there's a more linear way > of doing it. If I hear back, I'll follow-up here. > > I know the *Open*BSD installer is very linear and is quite > accessible with the dumbest of serial consoles. > > Once installed, at least the console should be pretty accessible. I > haven't kicked the tires on the GUI with Orca yet. > > -tim > > > > On December 12, 2018, Linux for blind general discussion wrote: > > Hi, > > > > I want to try FreeBSD 12.0. Is the .dvd image accessible for blind > > users or not? > > > > Thanks, > > > > Pavel > > > > > > _______________________________________________ > > Blinux-list mailing list > > Blinux-list@xxxxxxxxxx > > https://www.redhat.com/mailman/listinfo/blinux-list > > _______________________________________________ > Blinux-list mailing list > Blinux-list@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/blinux-list _______________________________________________ Blinux-list mailing list Blinux-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/blinux-list