Hi Didier,
-speed=2 did the trick. Slower burn with no errors!
On Sun, 4 Feb 2018, Linux for blind general discussion wrote:
Date: Sun, 4 Feb 2018 13:50:30
From: Linux for blind general discussion <blinux-list@xxxxxxxxxx>
To: Linux for blind general discussion <blinux-list@xxxxxxxxxx>
Subject: Re: growisofs dvd burn
Okay, the speed growisofs tried to use originally was 16.4 and it ended up
using an average of 10.4 so I'll try -speed=2 and see if those errors go
away. Only reason I'm using growisofs is because cdrecord returns a warning
to the effect of DMA test skipped and that didn't happen with growisofs. One
of these days I'll find the optimum burning speed for this drive.
On Sun, 4 Feb 2018, Linux for blind general discussion wrote:
Date: Sun, 4 Feb 2018 12:55:55
From: Linux for blind general discussion <blinux-list@xxxxxxxxxx>
To: Linux for blind general discussion <blinux-list@xxxxxxxxxx>
Subject: Re: growisofs dvd burn
Hi,
Le 04/02/2018 ? 18:40, Linux for blind general discussion a ?crit?:
I burnt a dvd with growisofs and got async and print req errors.? No
errors are documented along with descriptions in the growisofs man page
so I'm wondering if the dvd I used to do the burn is defective.
Or maybe you could try at a lower speed. Something like this:
growisofs -speed=2 -dvd-compat -Z /dev/sr0=your_iso_image.iso
Greetings,
Didier Spaier
_______________________________________________
Blinux-list mailing list
Blinux-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/blinux-list
--
_______________________________________________
Blinux-list mailing list
Blinux-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/blinux-list