I have run in to an interesting problem with a new build of pispeakup Jeffery Mewtamer <mewtamer@xxxxxxxxx> writes: > If you want to give it a try, ssh into a newly imaged Pi and do the > following: > > git clone https://github.com/cromarty/ttsprojects.git That got the ttsprojects tree as expected. > cd ttsprojects/raspberry-pi/libilctts It's there and contains autoconfiscate/ build/ COPYING HISTORY libtests/ README.md src/ TODO > sudo make That is the problem. There is no Makefile so everything stops with the expected message about there being no targets > sudo make install > cd ../piespeakup > sudo ./build.sh > > Using a jessie-lite image, the only dependencies you need to install > first is git, and you only need that to clone the remote repository. I only did one thing before adding git and that was to do apt-get update and apt-get upgrade which brings the new system up to date. All of the target directories in ttsprojects/raspberry-pi/libilctts do have Makefiles but the Makefile that should have been in libilctts should take care of directing what gets made and what to do if there are problems and that Makefile is not there. I hate to sound stupid but I figured I'd bring it up since it can be the difference between wasting a lot of time and ending up with the desired results. Again, many thanks. Martin _______________________________________________ Blinux-list mailing list Blinux-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/blinux-list