Well, some live365 stations will work if you do mplayer http://live365.com/play/ and after the slash you put whatever name live365 is using for that station. In your case it looks from the url like radioccl. Unfortunately that doesn't work with this particular station; you are just told to go register/login at the live365 website. Also, while looking at source is a good tool it isn't always necessary to do that. The way I found the name for your station was by going to www.clintoncountyradio.com and hitting the equals sign and looking at the url for the link. In fact sometimes you need only look at the url for your link as shown at the bottom of the page without even hitting the equals key or using source; btw you can also do source by hitting the backslash; it toggles between source and the rendered page. On the live365 page that I found as the first link of http://www.clintoncounty.com, if you look down all the links, I did find that wktz works according to the formula I gave above. Do not use -playlist with live365 stations btw. So does industrialinfo. Of course the best thing would be to log in and use the site per their setup but while I can do that in freedombox i have found no way to do that with any browser I have on my own system. -- Cheryl "Where your treasure is, there will your heart be also." _______________________________________________ Blinux-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/blinux-list