hi, I have unmuted it as evidenced by the hum in the speakers that go away when I mute it. I have also turned everything all the way up. Roy On Wed, 2 Jun 2004, Mike Gorse wrote: > Hi Roy, > > I'm guessing your device is muted. Alsa sets it up that way by default. > Play around with amixer. I imagine fedora has some mechanism for > initializing your card's settings, but I can't give specifics. > > -- Michael Gorse / AIM:linvortex / http://mgorse.home.dhs.org -- > A better world is possible! http://www.kucinich.us > > On Wed, 2 Jun 2004, Roy Nickelson wrote: > > > hi, > > i apear to be using the alsa sound drivers, I am us9ing fedora. However > > I can't get any sound to play. This is confusing because I had no > > trouble on redhat 9. all I had to do is type > > play /usr/share/sounds/phone.wav and i would hear the sound. > > Now I don't hear anything. I can tell my speakers aren't muted because I > > can hear the hum when I turn them up. when I mute them the hum goes > > away. Do you have any sugestions? > > roy > > On Wed, 2 Jun 2004, Stephen > > Clower wrote: > > > > > hi John, > > > What distribution are you using? If you simply get no sound and Linux doesn't complain about wave device errors, then it's likely that your sound card is muted. If you're using the ALSA sound drivers, you can do something like: > > > amixer set Master 100 unmute > > > amixer set PCM 25 unmute > > > to unmute your master and PCM channels. These are the settings I use on my laptop, so you'll probably have to experiment to find which volume works best for you. When you're finished, issue this command: > > > alsactl store > > > Now, any time the ALSA drivers are loaded into memory, your settings will be used. If you're not using ALSA, make sure the card has been found. Type > > > lsmod > > > and examine its output. If you see something about your sound card in the list of loaded modules, then you should be good to go. Note: ALSA sound modules start with the prefix snd, whereas the older OSS/Free drivers do not. Thus, my laptop's sound module for ALSA is snd-maestro3, and the old OSS/Free driver name is just maestro3. Knowing this should also help you to determine which type of module is loaded into memory. > > > HTH > > > Steve > > > > > > Stephen Clower, that guy from the south. > > > You can reach me by any of the following: > > > E-Mail: steve@xxxxxxxxxxxxxxx > > > MSN: steve@xxxxxxxxxxxxxxx > > > AIM: AudioRabbit03 > > > > > > You can also check out my little home on the web by visiting http://www.steve-audio.net > > > > > > > > > > > > _______________________________________________ > > > > > > Blinux-list@xxxxxxxxxx > > > https://www.redhat.com/mailman/listinfo/blinux-list > > > > > > > > > _______________________________________________ > > > > Blinux-list@xxxxxxxxxx > > https://www.redhat.com/mailman/listinfo/blinux-list > > > > > _______________________________________________ > > Blinux-list@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/blinux-list > _______________________________________________ Blinux-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/blinux-list