[quoted lines by David Renström on 2004/04/16 at 01:28 +0200] >I've now been trying for several hours to get my Braille Voyager >to work Which release of BRLTTY are you using. I recommend you use 3.5pre3 as that should eliminate all usb device problems. Just make sure that usb is configured into your kernel and that the correct usb-controller alias is in your modules.conf file. Also, if you want things to work as standardly as possible then mount the usbfs file system under /proc/bus/usb. Note that, in 3.5pre3, you specify "usb:" (the trailing colon is important) rather than "brlvger" as the device. -- Dave Mielke | 2213 Fox Crescent | I believe that the Bible is the Phone: 1-613-726-0014 | Ottawa, Ontario | Word of God. Please contact me EMail: dave@xxxxxxxxx | Canada K2A 1H7 | if you're concerned about Hell. http://familyradio.com/ | http://mielke.cc/bible/ _______________________________________________ Blinux-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/blinux-list