https://bugzilla.kernel.org/show_bug.cgi?id=217925 Lakshmanakumar (lakshmanakumar.mohan@xxxxxxxxxxxxx) changed: What |Removed |Added ---------------------------------------------------------------------------- Keywords| |trivial Summary|Backporting ath11k QCN9074 |Backporting ath11k QCN9074 |no network interface |support to kernel 5.10 - no | |network interface --- Comment #1 from Lakshmanakumar (lakshmanakumar.mohan@xxxxxxxxxxxxx) --- I'm trying to port the ath11k driver from kernel 5.15 to kernel 5.10 for supporting the QCN9074 modules. I have also copied the firmwares from https://github.com/kvalo/ath11k-firmware/tree/master/QCN9074/hw1.0 I could see the below logs after loading the ath11k_pci driver. But it does not proceed after the below state. Therefore the wireless network interface fails loading. [ 520.582093] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 520.594227] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 520.630560] ath11k_pci 0000:03:00.0: runtime IRQ mapping not provided by arch [ 520.637930] ath11k_pci 0000:03:00.0: BAR 0: assigned [mem 0xdfa00000-0xdfbfffff 64bit] [ 520.646225] ath11k_pci 0000:03:00.0: qcn9074 hw1.0 [ 520.654325] NET: Registered protocol family 42 [ 520.714305] mhi 0000:03:00.0: Requested to power ON [ 520.719416] mhi 0000:03:00.0: Power on setup success PCI list shows the interface as root@localhost:/# lspci -v -s 0000:03:00.0 03:00.0 Network controller: Qualcomm Device 1104 (rev 01) Subsystem: Qualcomm Device 1104 Flags: bus master, fast devsel, latency 0, IRQ 77 Memory at dfa00000 (64-bit, non-prefetchable) [size=2M] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable+ Count=16/32 Maskable+ 64bit- Capabilities: [70] Express Endpoint, MSI 00 Kernel driver in use: ath11k_pci Kernel modules: ath11k_pci root@localhost:/# tree /sys/bus/pci/devices/0000\:03\:00.0/ 0000:03:00.0/ driver/ rescan 0000:03:00.0_IPCR/ driver_override reset 0000:03:00.0_LOOPBACK/ -- You may reply to this email to add a comment. You are receiving this mail because: You are the assignee for the bug.-- To unsubscribe from this list: send the line "unsubscribe backports" in
