In the current hwsim config no rate control algorithm is enabled. This means that, when using defconfig-hwsim, the mac80211_hwsim fails to load with the following error: [ 132.155183] ieee80211 phy0: Failed to select rate control algorithm [ 132.155196] ieee80211 phy0: Failed to initialize rate control algorithm Fix this by enabling rate control algorithms in the provided hwsim config. Experiments were also less reliable when WEXT was enabled. So this patch also disables WEXT when using defconfig-hwsim to make the default more reliable for users. Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@xxxxxxxxxxx> --- backport/defconfigs/hwsim | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/backport/defconfigs/hwsim b/backport/defconfigs/hwsim index 9d8006ea..9f054c79 100644 --- a/backport/defconfigs/hwsim +++ b/backport/defconfigs/hwsim @@ -1,11 +1,15 @@ CPTCFG_CFG80211=m CPTCFG_CFG80211_DEFAULT_PS=y CPTCFG_CFG80211_DEBUGFS=y -CPTCFG_CFG80211_WEXT=y +CPTCFG_CFG80211_WEXT=n CPTCFG_MAC80211=m + # CPTCFG_MAC80211_RC_PID is not set -# CPTCFG_MAC80211_RC_MINSTREL is not set -# CPTCFG_MAC80211_RC_DEFAULT_MINSTREL is not set +CPTCFG_MAC80211_HAS_RC=y +CPTCFG_MAC80211_RC_MINSTREL=y +CPTCFG_MAC80211_RC_DEFAULT_MINSTREL=y +CPTCFG_MAC80211_RC_DEFAULT="minstrel_ht" + CPTCFG_MAC80211_DEBUGFS=y CPTCFG_MAC80211_MESSAGE_TRACING=y CPTCFG_WLAN=y -- 2.35.1 -- To unsubscribe from this list: send the line "unsubscribe backports" in
