The kernel header file linux/cordic.h changed in v5.0 kernel resulting in backport build to fail for brcmsmac (and probably b43 as well). So backport those definitions for older kernels. Signed-off-by: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx> --- Hi, It has been a while since I submitted or did anything with the backports repo. I was using it on Ubuntu 14.04 and had a problem building coccinelle v1.0.7. I finally fixed that so I wanted to share here what was going on so it may help others. So while building coccinelle it failed with following: make[1]: Entering directory `/projects/hnd_software_nl/work/arend/utils/coccinelle-1.0.7/bundles/parmap' /usr/bin/ocamlc.opt -unsafe -I parmap -c parmap/bytearray.ml -o parmap/bytearray.cmo File "parmap/bytearray.ml", line 1: Error: Could not find the .cmi file for interface parmap/bytearray.mli. make[1]: *** [parmap/bytearray.cmo] Error 2 make[1]: Leaving directory `/projects/hnd_software_nl/work/arend/utils/coccinelle-1.0.7/bundles/parmap' make: *** [all] Error 2 So what is going on. During configure it is detected that my machine does not have the parmap ocaml library. This library is also bundled in coccinelle tarbal so it decides to build that. However, that fails for some reason. I decided to take a closer look. I found that if I went to bundles/parmap/parmap and run make there the build went fine so I went along and installed it. Rerun configure picked up the installed parmap library and the reset of coccinelle build went fine. So I am back in business and here is the patch that should fix the cordic users. Regards, Arend --- backport/backport-include/linux/cordic.h | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/backport/backport-include/linux/cordic.h b/backport/backport-include/linux/cordic.h index 67d6a4a..101da91 100644 --- a/backport/backport-include/linux/cordic.h +++ b/backport/backport-include/linux/cordic.h @@ -5,6 +5,16 @@ #if (LINUX_VERSION_CODE > KERNEL_VERSION(3,1,0)) #include_next <linux/cordic.h> +#if LINUX_VERSION_IS_LESS(5,0,0) +#define CORDIC_ANGLE_GEN 39797 +#define CORDIC_PRECISION_SHIFT 16 +#define CORDIC_NUM_ITER (CORDIC_PRECISION_SHIFT + 2) + +#define CORDIC_FIXED(X) ((s32)((X) << CORDIC_PRECISION_SHIFT)) +#define CORDIC_FLOAT(X) (((X) >= 0) \ + ? ((((X) >> (CORDIC_PRECISION_SHIFT - 1)) + 1) >> 1) \ + : -((((-(X)) >> (CORDIC_PRECISION_SHIFT - 1)) + 1) >> 1)) +#endif #else /* -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe backports" in
