https://bugzilla.kernel.org/show_bug.cgi?id=51671 --- Comment #14 from mp-001@xxxxxxxxxxx 2013-03-11 20:12:12 --- Here dmesg: ### booting ... [ 6.666705] alx 0000:04:00.0: irq 47 for MSI/MSI-X [ 6.666711] alx 0000:04:00.0: irq 48 for MSI/MSI-X [ 6.666714] alx 0000:04:00.0: irq 49 for MSI/MSI-X [ 6.666717] alx 0000:04:00.0: irq 50 for MSI/MSI-X [ 6.666721] alx 0000:04:00.0: irq 51 for MSI/MSI-X [ 6.666724] alx 0000:04:00.0: irq 52 for MSI/MSI-X [ 6.666728] alx 0000:04:00.0: irq 53 for MSI/MSI-X [ 6.666732] alx 0000:04:00.0: irq 54 for MSI/MSI-X [ 6.666735] alx 0000:04:00.0: irq 55 for MSI/MSI-X [ 6.667708] alx 0000:04:00.0 p3p1: NIC Link Up: 1 Gbps Full [ 6.974830] Bridge firewalling registered [ 6.978233] RPC: Registered named UNIX socket transport module. [ 6.978236] RPC: Registered udp transport module. [ 6.978237] RPC: Registered tcp transport module. [ 6.978238] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.018578] device virbr0-nic entered promiscuous mode [ 7.130203] virbr0: topology change detected, propagating [ 7.130211] virbr0: port 1(virbr0-nic) entered forwarding state [ 7.130231] virbr0: port 1(virbr0-nic) entered forwarding state [ 7.151878] virbr0: port 1(virbr0-nic) entered disabled state [ 7.173009] systemd-readahead[411]: Failed to read event: Value too large for defined data type [ 7.271444] Ebtables v2.0 registered [ 7.317803] cgroup: libvirtd (1340) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 7.317809] cgroup: "memory" requires setting use_hierarchy to 1 on the root. [ 7.317897] cgroup: libvirtd (1340) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 7.317994] cgroup: libvirtd (1340) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 8.762277] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 8.762338] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 8.780100] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 8.780563] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 19.299383] fuse init (API version 7.20) [ 19.304469] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts [ 19.329191] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts ##### Suspend/Resume [ 51.801000] PM: Syncing filesystems ... done. [ 51.802365] PM: Preparing system for mem sleep [ 51.919598] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 51.931307] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 51.942323] PM: Entering mem sleep [ 51.942674] Suspending console(s) (use no_console_suspend to debug) [ 51.942920] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 1 ep 0 with no TDs queued? [ 51.942954] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 51.942958] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 51.943089] sd 0:0:0:0: [sda] Stopping disk [ 51.943800] sd 1:0:0:0: [sdb] Stopping disk [ 51.956198] nouveau [ DRM] suspending fbcon... [ 51.956201] nouveau [ DRM] suspending display... [ 51.956209] nouveau [ DRM] unpinning framebuffer(s)... [ 51.956281] nouveau [ DRM] evicting buffers... [ 51.963344] nouveau [ DRM] suspending client object trees... [ 52.602795] ACPI: Cannot transition to non-D0 state from D3 [ 54.281631] alx 0000:04:00.0 p3p1: wol: ctrl=3, speed=C [ 54.285938] alx 0000:04:00.0: System wakeup enabled by ACPI [ 54.297100] PM: suspend of devices complete after 2355.576 msecs [ 54.297221] PM: late suspend of devices complete after 0.119 msecs [ 54.308033] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 54.318957] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 54.340919] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 54.351908] PM: noirq suspend of devices complete after 54.714 msecs [ 54.352556] ACPI: Preparing to enter system sleep state S3 [ 54.434093] PM: Saving platform NVS memory [ 54.487218] Disabling non-boot CPUs ... [ 54.488995] smpboot: CPU 1 is now offline [ 54.489186] CPU 1 offline: Remove Rx thread [ 54.490536] smpboot: CPU 2 is now offline [ 54.490676] CPU 2 offline: Remove Rx thread [ 54.492095] smpboot: CPU 3 is now offline [ 54.492242] CPU 3 offline: Remove Rx thread [ 54.493810] smpboot: CPU 4 is now offline [ 54.494017] CPU 4 offline: Remove Rx thread [ 54.495326] smpboot: CPU 5 is now offline [ 54.495477] CPU 5 offline: Remove Rx thread [ 54.495788] Broke affinity for irq 42 [ 54.496805] smpboot: CPU 6 is now offline [ 54.496971] CPU 6 offline: Remove Rx thread [ 54.497277] Broke affinity for irq 23 [ 54.497279] Broke affinity for irq 41 [ 54.498300] smpboot: CPU 7 is now offline [ 54.498534] CPU 7 offline: Remove Rx thread [ 54.498641] Extended CMOS year: 2000 [ 54.499792] ACPI: Low-level resume complete [ 54.499834] PM: Restoring platform NVS memory [ 54.501452] Extended CMOS year: 2000 [ 54.502155] microcode: CPU0 updated to revision 0x13, date = 2012-07-16 [ 54.502187] Enabling non-boot CPUs ... [ 54.502256] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 54.516592] microcode: CPU1 updated to revision 0x13, date = 2012-07-16 [ 54.516596] bnx2i: CPU 1 online: Create Rx thread [ 54.516638] CPU1 is up [ 54.516679] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 54.531035] microcode: CPU2 updated to revision 0x13, date = 2012-07-16 [ 54.531039] bnx2i: CPU 2 online: Create Rx thread [ 54.531068] CPU2 is up [ 54.531109] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 54.545475] microcode: CPU3 updated to revision 0x13, date = 2012-07-16 [ 54.545480] bnx2i: CPU 3 online: Create Rx thread [ 54.545508] CPU3 is up [ 54.545542] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 54.559845] microcode: CPU4 updated to revision 0x13, date = 2012-07-16 [ 54.559849] bnx2i: CPU 4 online: Create Rx thread [ 54.559880] CPU4 is up [ 54.559914] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 54.574260] microcode: CPU5 updated to revision 0x13, date = 2012-07-16 [ 54.574264] bnx2i: CPU 5 online: Create Rx thread [ 54.574289] CPU5 is up [ 54.574322] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 54.588624] microcode: CPU6 updated to revision 0x13, date = 2012-07-16 [ 54.588633] bnx2i: CPU 6 online: Create Rx thread [ 54.588660] CPU6 is up [ 54.588688] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 54.602966] microcode: CPU7 updated to revision 0x13, date = 2012-07-16 [ 54.602969] bnx2i: CPU 7 online: Create Rx thread [ 54.602995] CPU7 is up [ 54.613273] ACPI: Waking up from system sleep state S3 [ 54.685567] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 54.707544] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 54.729531] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 54.740565] nouveau 0000:01:00.0: power state changed by ACPI to D0 [ 54.773587] PM: noirq resume of devices complete after 109.717 msecs [ 54.773683] PM: early resume of devices complete after 0.074 msecs [ 54.773712] i915 0000:00:02.0: setting latency timer to 64 [ 54.773723] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 54.773756] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 54.773768] usb usb1: root hub lost power or was reset [ 54.773770] usb usb3: root hub lost power or was reset [ 54.773772] usb usb4: root hub lost power or was reset [ 54.773793] ahci 0000:00:1f.2: setting latency timer to 64 [ 54.773794] nouveau [ DRM] re-enabling device... [ 54.773811] mei 0000:00:16.0: irq 44 for MSI/MSI-X [ 54.773845] xhci_hcd 0000:00:14.0: Slot 1 endpoint 2 not removed from BW list! [ 54.773851] nouveau [ DRM] resuming client object trees... [ 54.773856] nouveau [ VBIOS][0000:01:00.0] running init tables [ 54.773870] alx 0000:04:00.0: System wakeup disabled by ACPI [ 54.773891] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X [ 54.773931] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 54.773991] usb usb2: root hub lost power or was reset [ 54.774078] xhci_hcd 0000:00:14.0: irq 46 for MSI/MSI-X [ 54.776668] mei 0000:00:16.0: unexpected reset: dev_state = RESETING [ 54.777665] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 54.777876] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 54.925686] nouveau [ DRM] resuming display... [ 55.079363] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 55.080891] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 55.080903] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 55.081303] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 55.082027] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 55.082111] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 55.082115] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 55.083149] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 55.083154] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 55.083155] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 55.083231] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 55.083235] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 55.083509] ata3.00: configured for UDMA/100 [ 55.083579] ata2.00: configured for UDMA/133 [ 55.083738] sd 1:0:0:0: [sdb] Starting disk [ 55.228348] usb 3-3: reset low-speed USB device number 2 using xhci_hcd [ 55.242226] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021ec41840 [ 55.242232] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 55.342262] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 55.558141] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 55.949055] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci [ 56.027058] btusb 1-1.1:1.0: no reset_resume for driver btusb? [ 56.027061] btusb 1-1.1:1.1: no reset_resume for driver btusb? [ 56.097967] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [ 56.775847] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [ 57.627026] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 57.633272] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 57.633359] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 57.633363] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 57.645737] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 57.645826] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 57.645829] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 57.651976] ata1.00: configured for UDMA/133 [ 57.652361] sd 0:0:0:0: [sda] Starting disk [ 57.654026] Extended CMOS year: 2000 [ 57.677143] PM: resume of devices complete after 2904.997 msecs [ 57.677639] PM: Finishing wakeup. [ 57.677640] Restarting tasks ... done. [ 57.690291] video LNXVIDEO:00: Restoring backlight state [ 57.690295] video LNXVIDEO:01: Restoring backlight state ###### sudo rmmod alx; sudo modprobe alx [ 102.414400] Qualcomm Atheros(R) AR816x/AR817x PCI-E Ethernet Network Driver [ 102.432649] alx 0000:04:00.0: alx(30:85:a9:01:9b:01): Qualcomm Atheros Ethernet Network Connection [ 102.451912] systemd-udevd[2839]: renamed network interface eth0 to p3p1 [ 102.460935] alx 0000:04:00.0: irq 47 for MSI/MSI-X [ 102.460958] alx 0000:04:00.0: irq 48 for MSI/MSI-X [ 102.460974] alx 0000:04:00.0: irq 49 for MSI/MSI-X [ 102.460991] alx 0000:04:00.0: irq 50 for MSI/MSI-X [ 102.461007] alx 0000:04:00.0: irq 51 for MSI/MSI-X [ 102.461025] alx 0000:04:00.0: irq 52 for MSI/MSI-X [ 102.461042] alx 0000:04:00.0: irq 53 for MSI/MSI-X [ 102.461059] alx 0000:04:00.0: irq 54 for MSI/MSI-X [ 102.461077] alx 0000:04:00.0: irq 55 for MSI/MSI-X [ 102.462652] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready [ 104.329822] alx 0000:04:00.0 p3p1: NIC Link Up: 1 Gbps Full [ 104.330071] IPv6: ADDRCONF(NETDEV_CHANGE): p3p1: link becomes ready -- Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. -- To unsubscribe from this list: send the line "unsubscribe backports" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
