[PATCH 2/3] compat-drivers: Add next-pending patches.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Bala Shanmugam <bkamatch@xxxxxxxxxxxxxxxx>
---
 .../0002-ath9k-Fix-MCI-reset-in-BT-cal_req.patch   |   95 ++++++++++++++++++
 ...mp-audio-profiles-on-weak-signal-strength.patch |  105 ++++++++++++++++++++
 2 files changed, 200 insertions(+), 0 deletions(-)
 create mode 100644 linux-next-pending/0002-ath9k-Fix-MCI-reset-in-BT-cal_req.patch
 create mode 100644 linux-next-pending/0003-ath9k-stomp-audio-profiles-on-weak-signal-strength.patch

diff --git a/linux-next-pending/0002-ath9k-Fix-MCI-reset-in-BT-cal_req.patch b/linux-next-pending/0002-ath9k-Fix-MCI-reset-in-BT-cal_req.patch
new file mode 100644
index 0000000..130fce8
--- /dev/null
+++ b/linux-next-pending/0002-ath9k-Fix-MCI-reset-in-BT-cal_req.patch
@@ -0,0 +1,95 @@
+From 21aac28c0e8a762395364bf99b939cba120f58e8 Mon Sep 17 00:00:00 2001
+From: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx>
+Date: Fri, 16 Nov 2012 19:18:01 +0530
+Subject: [PATCH 1/2] ath9k: Fix MCI reset in BT cal_req
+
+This patch reverts the commit "ath9k_hw: Wait BT calibration to complete"
+and bail out from MCI interrupt routine for chip reset. The above commit
+stalls the WLAN TCP traffic while bringing up and down the BT interface
+iteratively. Fixing this properly by queueing up chip reset and bailing
+out properly from tasklet routine.
+
+Signed-off-by: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx>
+---
+ drivers/net/wireless/ath/ath9k/ar9003_mci.c |  1 -
+ drivers/net/wireless/ath/ath9k/debug.c      |  3 +++
+ drivers/net/wireless/ath/ath9k/debug.h      |  1 +
+ drivers/net/wireless/ath/ath9k/mci.c        | 21 +++------------------
+ 4 files changed, 7 insertions(+), 19 deletions(-)
+
+--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
++++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+@@ -714,7 +714,6 @@ bool ar9003_mci_start_reset(struct ath_h
+ 
+ 	return true;
+ }
+-EXPORT_SYMBOL(ar9003_mci_start_reset);
+ 
+ int ar9003_mci_end_reset(struct ath_hw *ah, struct ath9k_channel *chan,
+ 			 struct ath9k_hw_cal_data *caldata)
+--- a/drivers/net/wireless/ath/ath9k/debug.c
++++ b/drivers/net/wireless/ath/ath9k/debug.c
+@@ -837,6 +837,9 @@ static ssize_t read_file_reset(struct fi
+ 	len += snprintf(buf + len, sizeof(buf) - len,
+ 			"%17s: %2d\n", "PLL RX Hang",
+ 			sc->debug.stats.reset[RESET_TYPE_PLL_HANG]);
++	len += snprintf(buf + len, sizeof(buf) - len,
++			"%17s: %2d\n", "MCI Reset",
++			sc->debug.stats.reset[RESET_TYPE_MCI]);
+ 
+ 	if (len > sizeof(buf))
+ 		len = sizeof(buf);
+--- a/drivers/net/wireless/ath/ath9k/debug.h
++++ b/drivers/net/wireless/ath/ath9k/debug.h
+@@ -41,6 +41,7 @@ enum ath_reset_type {
+ 	RESET_TYPE_PLL_HANG,
+ 	RESET_TYPE_MAC_HANG,
+ 	RESET_TYPE_BEACON_STUCK,
++	RESET_TYPE_MCI,
+ 	__RESET_TYPE_MAX
+ };
+ 
+--- a/drivers/net/wireless/ath/ath9k/mci.c
++++ b/drivers/net/wireless/ath/ath9k/mci.c
+@@ -207,23 +207,6 @@ skip_tuning:
+ 	ath9k_btcoex_timer_resume(sc);
+ }
+ 
+-static void ath_mci_wait_btcal_done(struct ath_softc *sc)
+-{
+-	struct ath_hw *ah = sc->sc_ah;
+-
+-	/* Stop tx & rx */
+-	ieee80211_stop_queues(sc->hw);
+-	ath_stoprecv(sc);
+-	ath_drain_all_txq(sc, false);
+-
+-	/* Wait for cal done */
+-	ar9003_mci_start_reset(ah, ah->curchan);
+-
+-	/* Resume tx & rx */
+-	ath_startrecv(sc);
+-	ieee80211_wake_queues(sc->hw);
+-}
+-
+ static void ath_mci_cal_msg(struct ath_softc *sc, u8 opcode, u8 *rx_payload)
+ {
+ 	struct ath_hw *ah = sc->sc_ah;
+@@ -235,7 +218,7 @@ static void ath_mci_cal_msg(struct ath_s
+ 	case MCI_GPM_BT_CAL_REQ:
+ 		if (mci_hw->bt_state == MCI_BT_AWAKE) {
+ 			mci_hw->bt_state = MCI_BT_CAL_START;
+-			ath_mci_wait_btcal_done(sc);
++			ath9k_queue_reset(sc, RESET_TYPE_MCI);
+ 		}
+ 		ath_dbg(common, MCI, "MCI State : %d\n", mci_hw->bt_state);
+ 		break;
+@@ -578,6 +561,8 @@ void ath_mci_intr(struct ath_softc *sc)
+ 		mci_int_rxmsg &= ~AR_MCI_INTERRUPT_RX_MSG_GPM;
+ 
+ 		while (more_data == MCI_GPM_MORE) {
++			if (test_bit(SC_OP_HW_RESET, &sc->sc_flags))
++				return;
+ 
+ 			pgpm = mci->gpm_buf.bf_addr;
+ 			offset = ar9003_mci_get_next_gpm_offset(ah, false,
diff --git a/linux-next-pending/0003-ath9k-stomp-audio-profiles-on-weak-signal-strength.patch b/linux-next-pending/0003-ath9k-stomp-audio-profiles-on-weak-signal-strength.patch
new file mode 100644
index 0000000..9efbcee
--- /dev/null
+++ b/linux-next-pending/0003-ath9k-stomp-audio-profiles-on-weak-signal-strength.patch
@@ -0,0 +1,105 @@
+From 2b2a2ffa141e1b2d9d4f2699dffcf7e35081089a Mon Sep 17 00:00:00 2001
+From: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx>
+Date: Mon, 19 Nov 2012 17:46:25 +0530
+Subject: [PATCH 2/2] ath9k: stomp audio profiles on weak signal strength
+
+On lower WLAN signal strength, WLAN downlink traffic might suffer
+from retransmissions. At the mean time, playing SCO/A2DP profiles
+is affecting WLAN stability. In such scenario, by stomping SCO/A2DP
+BT traffic completely for a BTCOEX period, gives WLAN traffic an
+oppertunity to recover PHY rate. It also improves WLAN stability at
+lower RSSI without sacificing BT traffic.
+
+Signed-off-by: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx>
+---
+ drivers/net/wireless/ath/ath9k/ath9k.h  |  1 +
+ drivers/net/wireless/ath/ath9k/btcoex.c |  1 +
+ drivers/net/wireless/ath/ath9k/btcoex.h |  1 +
+ drivers/net/wireless/ath/ath9k/gpio.c   |  5 ++++-
+ drivers/net/wireless/ath/ath9k/mci.c    | 18 ++++++++++++++++++
+ 5 files changed, 25 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/ath/ath9k/ath9k.h
++++ b/drivers/net/wireless/ath/ath9k/ath9k.h
+@@ -482,6 +482,7 @@ struct ath_btcoex {
+ 	int rssi_count;
+ 	struct ath_gen_timer *no_stomp_timer; /* Timer for no BT stomping */
+ 	struct ath_mci_profile mci;
++	u8 stomp_audio;
+ };
+ 
+ #ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
+--- a/drivers/net/wireless/ath/ath9k/btcoex.c
++++ b/drivers/net/wireless/ath/ath9k/btcoex.c
+@@ -49,6 +49,7 @@ static const u32 mci_wlan_weights[ATH_BT
+ 	{ 0x01017d01, 0x3b3b3b01, 0x3b3b3b01, 0x3b3b3b3b }, /* STOMP_LOW */
+ 	{ 0x01017d01, 0x01010101, 0x01010101, 0x01010101 }, /* STOMP_NONE */
+ 	{ 0x01017d01, 0x013b0101, 0x3b3b0101, 0x3b3b013b }, /* STOMP_LOW_FTP */
++	{ 0xffffff01, 0xffffffff, 0xffffff01, 0xffffffff }, /* STOMP_AUDIO */
+ };
+ 
+ void ath9k_hw_init_btcoex_hw(struct ath_hw *ah, int qnum)
+--- a/drivers/net/wireless/ath/ath9k/btcoex.h
++++ b/drivers/net/wireless/ath/ath9k/btcoex.h
+@@ -50,6 +50,7 @@ enum ath_stomp_type {
+ 	ATH_BTCOEX_STOMP_LOW,
+ 	ATH_BTCOEX_STOMP_NONE,
+ 	ATH_BTCOEX_STOMP_LOW_FTP,
++	ATH_BTCOEX_STOMP_AUDIO,
+ 	ATH_BTCOEX_STOMP_MAX
+ };
+ 
+--- a/drivers/net/wireless/ath/ath9k/gpio.c
++++ b/drivers/net/wireless/ath/ath9k/gpio.c
+@@ -247,6 +247,9 @@ static void ath_btcoex_period_timer(unsi
+ 			stomp_type = ATH_BTCOEX_STOMP_ALL;
+ 			timer_period = btcoex->btscan_no_stomp;
+ 		}
++	} else if (btcoex->stomp_audio >= 5) {
++		stomp_type = ATH_BTCOEX_STOMP_AUDIO;
++		btcoex->stomp_audio = 0;
+ 	}
+ 
+ 	ath9k_hw_btcoex_bt_stomp(ah, stomp_type);
+@@ -295,7 +298,7 @@ static void ath_btcoex_no_stomp_timer(vo
+ 	    (!(ah->caps.hw_caps & ATH9K_HW_CAP_MCI) &&
+ 	     test_bit(BT_OP_SCAN, &btcoex->op_flags)))
+ 		ath9k_hw_btcoex_bt_stomp(ah, ATH_BTCOEX_STOMP_NONE);
+-	 else if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_ALL)
++	else if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_ALL)
+ 		ath9k_hw_btcoex_bt_stomp(ah, ATH_BTCOEX_STOMP_LOW);
+ 
+ 	ath9k_hw_btcoex_enable(ah);
+--- a/drivers/net/wireless/ath/ath9k/mci.c
++++ b/drivers/net/wireless/ath/ath9k/mci.c
+@@ -729,12 +729,30 @@ void ath9k_mci_set_txpower(struct ath_so
+ 		ath9k_hw_set_txpowerlimit(ah, sc->config.txpowlimit, false);
+ }
+ 
++static void ath9k_mci_stomp_audio(struct ath_softc *sc)
++{
++	struct ath_hw *ah = sc->sc_ah;
++	struct ath_btcoex *btcoex = &sc->btcoex;
++	struct ath_mci_profile *mci = &btcoex->mci;
++
++	if (!mci->num_sco && !mci->num_a2dp)
++		return;
++
++	if (ah->stats.avgbrssi > 25) {
++		btcoex->stomp_audio = 0;
++		return;
++	}
++
++	btcoex->stomp_audio++;
++}
+ void ath9k_mci_update_rssi(struct ath_softc *sc)
+ {
+ 	struct ath_hw *ah = sc->sc_ah;
+ 	struct ath_btcoex *btcoex = &sc->btcoex;
+ 	struct ath9k_hw_mci *mci_hw = &sc->sc_ah->btcoex_hw.mci;
+ 
++	ath9k_mci_stomp_audio(sc);
++
+ 	if (!(mci_hw->config & ATH_MCI_CONFIG_CONCUR_TX))
+ 		return;
+ 
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe backports" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux